Processing of porous ceramics : Piezoelectric materials

[1]  Frank Mücklich,et al.  Periodic Pattern Formation of Intermetallic Phases with Long Range Order by Laser Interference Metallurgy , 2005 .

[2]  J. Halloran,et al.  Porous Ceramic Bodies with Interconnected Pore Channels by a Novel Freeze Casting Technique , 2005 .

[3]  Guo‐Jun Zhang,et al.  Synthesis of Porous Si3N4 Ceramics with Rod‐Shaped Pore Structure , 2005 .

[4]  K. Darcovich,et al.  Processing of Functionally Gradient Ceramic Membrane Substrates for Enhanced Porosity , 2004 .

[5]  Wolfgang M. Sigmund,et al.  Novel Powder-Processing Methods for Advanced Ceramics , 2004 .

[6]  Guo‐Jun Zhang,et al.  Fabrication of Porous Ceramics with Unidirectionally Aligned Continuous Pores , 2004 .

[7]  L. Gauckler,et al.  Gelling of Alumina Suspensions Using Alginic Acid Salt and Hydroxyaluminum Diacetate , 2004 .

[8]  X. Zhu,et al.  Improvement in the Strut Thickness of Reticulated Porous Ceramics , 2004 .

[9]  B. Tuttle,et al.  Pressure‐Induced Phase Transformation of Controlled‐Porosity Pb(Zr0.95Ti0.05)O3 Ceramics , 2004 .

[10]  T. Maschmeyer,et al.  Mesoporous Membranes—A Brief Overview of Recent Developments , 2004 .

[11]  J. Jansen,et al.  Basic Views on the Preparation of Porous Ceramic Membrane Layers: A Comparison Between Amorphous and Crystalline Layers, Leading to a New Method for the Preparation of Microporous Continuous Layers , 2004 .

[12]  A. Nakahira,et al.  Green Fabrication of Porous Ceramics Using an Aqueous Electrophoretic Deposition Process , 2003 .

[13]  Wei Pan,et al.  Fabrication and Evaluation of Porous Piezoelectric Ceramics and Porosity-Graded Piezoelectric Actuators , 2003 .

[14]  A. Boccaccini,et al.  Velocity of elastic waves in porous ceramic materials: influence of pore structure , 2003 .

[15]  J. Vohs,et al.  Synthesis of Highly Porous Yttria‐Stabilized Zirconia by Tape‐Casting Methods , 2003 .

[16]  Yongsheng Han,et al.  Fabrication of bimodal porous alumina ceramics , 2003 .

[17]  T. Fan,et al.  Porous TiC Ceramics Derived from Wood Template , 2002 .

[18]  J. Evans,et al.  High Porosity Hydroxyapatite Foam Scaffolds for Bone Substitute , 2002 .

[19]  W. Cho,et al.  Preparation of porous (Ba,Sr)TiO 3 by adding corn-starch , 2002 .

[20]  Ferdi Schüth,et al.  Handbook of porous solids , 2002 .

[21]  J. Park,et al.  Preparation of Porous Cordierite Using Gelcasting Method and its Feasibility as a Filter , 2002 .

[22]  T. Ohji,et al.  Effect of Agglomeration on Mechanical Properties of Porous Zirconia Fabricated by Partial Sintering , 2002 .

[23]  G. Tomandl,et al.  Preparation of Al2O3, TiO2 and Hydroxyapatite Ceramics with Pores Similar to a Honeycomb Structure , 2002 .

[24]  Hyuk Kim,et al.  Fabrication of Highly Porous Yttria-Stabilized Zirconia by Acid Leaching Nickel from a Nickel- Yttria-Stabilized Zirconia Cermet , 2002 .

[25]  M. Vallet‐Regí,et al.  Fabrication of porous hydroxyapatite bodies by a new direct consolidation method: starch consolidation. , 2002, Journal of biomedical materials research.

[26]  A. Piancastelli,et al.  Processing of Porous PZT Materials for Underwater Acoustics , 2002 .

[27]  A. Piancastelli,et al.  A microstructural study of porous piezoelectric ceramics obtained by different methods , 2001 .

[28]  Guo‐Jun Zhang,et al.  High‐Surface‐Area Alumina Ceramics Fabricated by the Decomposition of Al(OH)3 , 2001 .

[29]  P. Greil.  Biomorphous ceramics from lignocellulosics , 2001 .

[30]  Giuseppe Pezzotti,et al.  Rheological characteristics of slurry controlling the microstructure and the compressive strength behavior of biomimetic hydroxyapatite , 2001 .

[31]  C. Galassi,et al.  Mullite Suspensions for Reticulate Ceramic Preparation , 2000 .

[32]  Hua-Xin Peng,et al.  Microstructure of ceramic foams , 2000 .

[33]  M. Coimbra,et al.  Synergy of polysaccharide mixtures in gelcasting of alumina , 2000 .

[34]  Amit Bandyopadhyay,et al.  Processing of controlled porosity ceramic structures via fused deposition , 1999 .

[35]  J. Fricke,et al.  Development of Ferroelectric Aerogels , 1999 .

[36]  C. Galassi,et al.  Porous piezoelectric ceramic hydrophone , 1999 .

[37]  Jan Luyten,et al.  Porous Ceramic Membranes: Preparation, Transport Properties and Applications , 1998 .

[38]  C. Galassi,et al.  Ferroelectric ceramics with included porosity for hydrophone applications , 1998, ISAF 1998. Proceedings of the Eleventh IEEE International Symposium on Applications of Ferroelectrics (Cat. No.98CH36245).

[39]  A. Wanner.  Elastic modulus measurements of extremely porous ceramic materials by ultrasonic phase spectroscopy , 1998 .

[40]  Masahiro Yoshimura,et al.  Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants , 1998 .

[41]  M. Pelino,et al.  Porosification Effect on Electroceramic Properties , 1995 .

[42]  D. Hirschfeld,et al.  Processing of Porous Oxide Ceramics , 1995 .

[43]  R. Rice.  The Porosity Dependence of Physical Properties of Materials: A Summary Review , 1995 .

[44]  L. Klein,et al.  Porous Silica by the Sol-Gel Process , 1995 .

[45]  L. E. Cross,et al.  Effects of porosity on electric fatigue behaviour in PLZT and PZT ferroelectric ceramics , 1993 .

[46]  M. Taya,et al.  Electromechanical Properties of Porous Piezoelectric Ceramics , 1993 .

[47]  K. Miller,et al.  Low density ceramics fabricated from reticulated polymer substrates , 1987 .

[48]  J. Schiffer,et al.  Possibility of Observing a Condensed Crystalline State in Laser-Cooled Beams of Atomic Ions , 1986 .

[49]  R. Newnham,et al.  Piezoelectric 3–3 composites , 1982 .

[50]  L. E. Cross,et al.  Connectivity and piezoelectric-pyroelectric composites , 1978 .

[51]  J. W. Young.  Optimization of acoustic receiver noise performance , 1977 .

[52]  C. Galassi,et al.  Piezoceramic material with anisotropic graded porosity , 2005 .

[53]  P. Layrolle,et al.  Novel Method to Manufacture Porous Hydroxyapatite by Dual‐Phase Mixing , 2003 .

[54]  F. S. Ortega,et al.  Alternative gelling agents for the gelcasting of ceramic foams , 2003 .

[55]  S. Corbin,et al.  Influence of green formulation and pyrolyzable particulates on the porous microstructure and sintering characteristics of tape cast ceramics , 2001 .

[56]  S. Kanzaki,et al.  Synthesis of Porous Ceramics with Complex Pore Structure by Freeze‐Dry Processing , 2001 .

[57]  C. Galassi,et al.  Experimental evidence for similar critical behavior of elastic modulus and electric conductivity in porous ceramic materials , 1998 .

[58]  C. Galassi,et al.  Electro-elastic properties of porous piezoelectric ceramics obtained by tape casting , 1998 .

[59]  José M.F. Ferreira,et al.  Processing of porous ceramics by ‘starch consolidation’ , 1998 .

[60]  N. Setter,et al.  j/ Proceedings of the Eleventh IEEE // International Symposium on Applications of Ferroelectrics , 1998 .

[61]  M. Edirisinghe,et al.  Porosity development during removal of organic vehicle from ceramic injection mouldings , 1994 .

[62]  C. Scott,et al.  Processing of porous ceramics , 1992 .

[63]  R. Bhave,et al.  Inorganic membranes : synthesis, characteristics, and applications , 1991 .

[64]  L. Sheppard.  Corrosion-resistant ceramics for severe environments , 1991 .

[65]  A. C. Gill.  NOTES ON THE HYDRATION OF ANHYDRITE AND DEAD‐BURNED GYPSUM. , 2022 .