Reliability sequential compliance method for a partially observable gear system subject to vibration monitoring

Assumptions accompanying exponential failure models are often not met in the standard sequential probability ratio test (SPRT) of many products. However, for most of the mechanical products, Weibull distribution conforms to their life distributions better compared to other techniques. The SPRT method for Weibull life distribution is derived in this paper, which enables the implementation of reliability compliance tests for gearboxes. Using historical failure data and condition monitoring data, a life prediction model based on hidden Markov model (HMM) is established to describe the deterioration process of gearboxes, then the predicted remaining useful life (RUL) is transformed into failure data that is used in SPRT for further analysis, which can significantly save on testing time and reduce costs. Explicit expression for the distribution of RUL is derived in terms of the posterior probability that the system is in the unhealthy state. The predicted and actual values of the residual life are compared, and the average relative error is 3.90 %, which verifies the validity of the proposed residual life prediction approach. A comparison with other life prediction and SPRT methods is given to elucidate the efficacy of the proposed approach.

[1]  An Zong-we.  A Method to Determine the Life Distribution Function of Components for Wind Turbine Gearbox , 2014 .

[2]  Ying Peng,et al.  Current status of machine prognostics in condition-based maintenance: a review , 2010 .

[3]  M. Shadlen,et al.  A Neural Implementation of Wald’s Sequential Probability Ratio Test , 2015, Neuron.

[4]  Yahya Chetouani,et al.  A sequential probability ratio test (SPRT) to detect changes and process safety monitoring , 2014 .

[5]  Der-Chiang Li,et al.  Building reliability growth model using sequential experiments and the Bayesian theorem for small datasets , 2010, Expert Syst. Appl..

[6]  Yuan Hongjie,et al.  Sequential compliance test method for lognormal distribution , 2012 .

[7]  Liu Hongmei,et al.  Online milling tool condition monitoring with a single continuous hidden Markov models approach , 2014 .

[8]  Mark J. F. Gales,et al.  The Application of Hidden Markov Models in Speech Recognition , 2007, Found. Trends Signal Process..

[9]  Viliam Makis,et al.  Optimal Bayesian estimation and control scheme for gear shaft fault detection , 2012, Comput. Ind. Eng..

[10]  Zhang Wu,et al.  An SPRT control chart with variable sampling intervals , 2011 .

[11]  Viliam Makis,et al.  Multivariate Bayesian Control Chart , 2008, Oper. Res..

[12]  Yongbo Li,et al.  Health Condition Monitoring and Early Fault Diagnosis of Bearings Using SDF and Intrinsic Characteristic-Scale Decomposition , 2016, IEEE Transactions on Instrumentation and Measurement.

[13]  Rui Jiang,et al.  Parameter estimation for partially observable systems subject to random failure , 2013 .

[14]  G. Reinsel.  Elements of Multivariate Time Series Analysis , 1995 .

[15]  Bo Guo,et al.  A Censored Sequential Posterior Odd Test (SPOT) Method for Verification of the Mean Time To Repair , 2008, IEEE Transactions on Reliability.

[16]  Minqiang Xu,et al.  An improvement EMD method based on the optimized rational Hermite interpolation approach and its application to gear fault diagnosis , 2015 .

[17]  J. Bert Keats,et al.  Robustness of the exponential sequential probability ratio test (SPRT) when Weibull distributed failures are transformed using a “known” shape parameter , 1997 .

[18]  Zhang Wu,et al.  An improved SPRT control chart for monitoring process mean , 2010 .

[19]  Viliam Makis,et al.  Autoregressive model-based gear shaft fault diagnosis using the Kolmogorov–Smirnov test , 2009 .

[20]  Viliam Makis,et al.  Parameter estimation in a condition-based maintenance model , 2010 .

[21]  P. V. Pandit,et al.  On Robustness of a Sequential Test for Scale Parameter of Gamma and Exponential Distributions , 2010 .

[22]  Viliam Makis,et al.  Optimal Bayesian fault prediction scheme for a partially observable system subject to random failure , 2011, Eur. J. Oper. Res..

[23]  Tzong-Ru Tsai,et al.  Reliability sampling plans for Weibull distribution with limited capacity of test facility , 2008, Comput. Ind. Eng..

[24]  Wenyi Wang,et al.  Autoregressive Model-Based Gear Fault Diagnosis , 2002 .

[25]  Christopher Durugbo,et al.  Performance assessment of wind turbine gearboxes using in-service data: Current approaches and future trends , 2015 .

[26]  Donghua Zhou,et al.  Remaining useful life estimation - A review on the statistical data driven approaches , 2011, Eur. J. Oper. Res..

[27]  W. Meeker.  Accelerated Testing: Statistical Models, Test Plans, and Data Analyses , 1991 .

[28]  Simon Braun,et al.  The synchronous (time domain) average revisited , 2011 .