A thermodynamic approach for selecting operating conditions in the design of reversible solid oxide cell energy systems

Abstract Reversible solid oxide cell (ReSOC) systems are being increasingly considered for electrical energy storage, although much work remains before they can be realized, including cell materials development and system design optimization. These systems store electricity by generating a synthetic fuel in electrolysis mode and subsequently recover electricity by electrochemically oxidizing the stored fuel in fuel cell mode. System thermal management is improved by promoting methane synthesis internal to the ReSOC stack. Within this strategy, the cell-stack operating conditions are highly impactful on system performance and optimizing these parameters to suit both operating modes is critical to achieving high roundtrip efficiency. Preliminary analysis shows the thermoneutral voltage to be a useful parameter for analyzing ReSOC systems and the focus of this study is to quantitatively examine how it is affected by ReSOC operating conditions. The results reveal that the thermoneutral voltage is generally reduced by increased pressure, and reductions in temperature, fuel utilization, and hydrogen-to-carbon ratio. Based on the thermodynamic analysis, many different combinations of these operating conditions are expected to promote efficient energy storage. Pressurized systems can achieve high efficiency at higher temperature and fuel utilization, while non-pressurized systems may require lower stack temperature and suffer from reduced energy density.

[1]  E. Wachsman,et al.  Lowering the Temperature of Solid Oxide Fuel Cells , 2011, Science.

[2]  M. Mori,et al.  Steam electrolysis performance of intermediate-temperature solid oxide electrolysis cell and efficiency of hydrogen production system at 300 Nm3 h−1 , 2010 .

[3]  K. Friedrich,et al.  Theoretical study on pressurized operation of solid oxide electrolysis cells , 2012 .

[4]  Jun Liu,et al.  Electrochemical energy storage for green grid. , 2011, Chemical reviews.

[5]  A. Roscoe,et al.  Modeling a Reversible Solid Oxide Fuel Cell as a Storage Device Within AC Power Networks , 2012 .

[6]  K. Sasaki,et al.  Equilibria in Fuel Cell Gases I. Equilibrium Compositions and Reforming Conditions , 2003 .

[7]  S. Ebbesen,et al.  Co-Electrolysis of Steam and Carbon Dioxide in Solid Oxide Cells , 2012 .

[8]  M. Melaina,et al.  Production of Fischer–Tropsch liquid fuels from high temperature solid oxide co-electrolysis units , 2012 .

[9]  K. Lackner,et al.  Sustainable hydrocarbon fuels by recycling CO2 and H2O with renewable or nuclear energy , 2011 .

[10]  E. Miller,et al.  A High Power Density Intermediate‐Temperature Solid Oxide Fuel Cell with Thin (La0.9Sr0.1)0.98(Ga0.8Mg0.2)O3‐δ Electrolyte and Nano‐Scale Anode , 2014 .

[11]  David Lindley,et al.  Smart grids: The energy storage problem , 2010, Nature.

[12]  Christopher Graves,et al.  Production of Synthetic Fuels by Co-Electrolysis of Steam and Carbon Dioxide , 2009 .

[13]  H. Spliethoff,et al.  A detailed techno-economic analysis of heat integration in high temperature electrolysis for efficient hydrogen production , 2015 .

[14]  E. Ivers-Tiffée,et al.  Kinetics of (reversible) internal reforming of methane in solid oxide fuel cells under stationary and APU conditions , 2010 .

[15]  James E. O'Brien,et al.  Parametric study of large-scale production of syngas via high-temperature co-electrolysis , 2007 .

[16]  Josef Kallo,et al.  Influence of Pressurisation on SOFC Performance and Durability: A Theoretical Study , 2011 .

[17]  Scott A. Barnett,et al.  High efficiency electrical energy storage using a methane–oxygen solid oxide cell , 2011 .

[18]  S. Cicconardi,et al.  Hydrogen energy storage: Preliminary analysis , 1993 .

[19]  J. Baker.  New technology and possible advances in energy storage , 2008 .

[20]  John Andrews,et al.  Theory, modelling and performance measurement of unitised regenerative fuel cells , 2009 .

[21]  Zhan Gao,et al.  Large-scale electricity storage utilizing reversible solid oxide cells combined with underground storage of CO2 and CH4 , 2015 .

[22]  H. Uchida,et al.  Efficiency Calculations for SOFC/SOEC Reversible System and Evaluations of Performances of Button-Size Anode-Supported Cell , 2013 .

[23]  S. Barnett,et al.  A solid oxide cell yielding high power density below 600 °C , 2012 .

[24]  Zongping Shao,et al.  Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells , 2012 .

[25]  P. Kazempoor,et al.  Model validation and performance analysis of regenerative solid oxide cells: Electrolytic operation , 2014 .

[26]  Tak-Hyoung Lim,et al.  Operating characteristics of a 5 kW class anode-supported planar SOFC stack for a fuel cell/gas turbine hybrid system , 2008 .

[27]  J. Kilner,et al.  Performance of solid oxide electrolysis cells based on scandia stabilised zirconia , 2009 .

[28]  P. Kazempoor,et al.  Novel electrical energy storage system based on reversible solid oxide cells: System design and operating conditions , 2015 .

[29]  W. Mérida,et al.  Thermodynamics of high-temperature, high-pressure water electrolysis , 2014 .

[30]  Josep M. Guerrero,et al.  Highly Efficient Distributed Generation and High-Capacity Energy Storage. , 2012 .

[31]  S. Jensen,et al.  Hydrogen and synthetic fuel production using pressurized solid oxide electrolysis cells , 2010 .

[32]  D. Brett,et al.  Intermediate temperature solid oxide fuel cells. , 2008, Chemical Society reviews.

[33]  Easa I. Al-musleh,et al.  Continuous power supply from a baseload renewable power plant , 2014 .

[34]  Xiongwen Zhang,et al.  A review of integration strategies for solid oxide fuel cells , 2010 .

[35]  Josef Kallo,et al.  Pressurized solid oxide fuel cells: Experimental studies and modeling , 2011 .

[36]  Kazunari Sasaki,et al.  Equilibria in Fuel Cell Gases II. The C-H-O Ternary Diagrams , 2003 .

[37]  Zongqiang Mao,et al.  Development of solid oxide fuel cell materials for intermediate-to-low temperature operation , 2012 .

[38]  E. Varkaraki,et al.  Hydrogen-based uninterruptible power supply , 2007 .

[39]  Donald W. Johnson,et al.  Round Trip Energy Efficiency of NASA Glenn Regenerative Fuel Cell System , 2006 .

[40]  R. Braun,et al.  Design and techno-economic analysis of high efficiency reversible solid oxide cell systems for distributed energy storage , 2016 .

[41]  David A. J. Rand,et al.  Energy storage — a key technology for global energy sustainability , 2001 .

[42]  G. Broers,et al.  Carbon deposition boundaries and other constant parameter curves, in the triangular representation of CHO equilibria, with applications to fuel cells , 1965 .

[43]  Zongping Shao,et al.  Progress in understanding and development of Ba0.5Sr0.5Co0.8Fe0.2O3−δ-based cathodes for intermediate-temperature solid-oxide fuel cells: A review , 2009 .

[44]  John B. Goodenough,et al.  A novel solid oxide redox flow battery for grid energy storage , 2011 .

[45]  Nigel P. Brandon,et al.  Hydrogen production through steam electrolysis: Model-based dynamic behaviour of a cathode-supported intermediate temperature solid oxide electrolysis cell , 2008 .

[46]  B. Dunn,et al.  Electrical Energy Storage for the Grid: A Battery of Choices , 2011, Science.

[47]  M. Mosleh,et al.  Analysis of self-sustaining recuperative solid oxide electrolysis systems , 2008 .

[48]  Mogens Bjerg Mogensen,et al.  Thermodynamic analysis of synthetic hydrocarbon fuel production in pressurized solid oxide electrolysis cells , 2012 .

[49]  S. Barnett,et al.  Modeling and experimental performance of an intermediate temperature reversible solid oxide cell for high-efficiency, distributed-scale electrical energy storage , 2015 .

[50]  J. Vetrano,et al.  Grid Energy Storage , 2013 .