An irreversible cohesive zone model for interface fatigue crack growth simulation

[1]  Shankar Mall,et al.  A cohesive zone model for fatigue crack growth in quasibrittle materials , 2001 .

[2]  M. V. Tooren,et al.  Composite adhesive joints under cyclic loading , 1999 .

[3]  A. de-Andrés,et al.  Elastoplastic finite element analysis of three-dimensional fatigue crack growth in aluminum shafts subjected to axial loading , 1999 .

[4]  A. Evans,et al.  The influence of solid-state and liquid-phase bonding on fatigue at Al/Al2O3 interfaces , 1999 .

[5]  Crocombe A.D,et al.  Assessing stress state and mean load effects on the fatigue response of adhesively bonded joints , 1999 .

[6]  Reinhold H. Dauskardt,et al.  Adhesion and Reliability of Polymer/Inorganic Interfaces , 1998 .

[7]  F. L. Matthews,et al.  Adhesively-bonded repairs to fibre-composite materials I. Experimental , 1998 .

[8]  David H. Allen,et al.  A model for predicting the damage and environmental degradation dependent life of SCS-6/Timetal®21S [0]4 metal matrix composite , 1998 .

[9]  Subra Suresh,et al.  Fatigue crack propagation along polymer-metal interfaces in microelectronic packages , 1997 .

[10]  R. Girard,et al.  Numerical analysis of composite systems by using interphase/interface models , 1997 .

[11]  J. Shang,et al.  Effect of Load-Mix on Fatigue Crack Growth in 63Sn-37Pb Solder Joints , 1997 .

[12]  David L. McDowell,et al.  An engineering model for propagation of small cracks in fatigue , 1997 .

[13]  Anthony J. Kinloch,et al.  The Fatigue and Durability Behaviour of Automotive Adhesives. Part I: Fracture Mechanics Tests , 1997 .

[14]  R. M. Cannon,et al.  Fracture and fatigue-crack growth along aluminum-alumina interfaces , 1996 .

[15]  T. Vu-khanh,et al.  Use of end-loaded-split (ELS) test to study stable fracture behaviour of composites under mode II loading , 1996 .

[16]  J. E. Ritter,et al.  Cyclic fatigue—crack growth along polymer/glass interfaces , 1996 .

[17]  Fernand Ellyin,et al.  A study of fatigue crack closure by elastic-plastic finite element analysis for constant-amplitude loading , 1996 .

[18]  Ken Gall,et al.  Recent advances in fatigue crack growth modeling , 1996 .

[19]  Anthony G. Evans,et al.  Fatigue crack growth and stress redistribution at interfaces , 1994 .

[20]  Jean Lemaitre,et al.  A Course on Damage Mechanics , 1992 .

[21]  J. H. Crews,et al.  Redesign of the Mixed-Mode Bending Delamination Test to Reduce Nonlinear Effects , 1992 .

[22]  A. Needleman.  Micromechanical modelling of interfacial decohesion , 1992 .

[23]  R. M. Cannon,et al.  Cyclic fatigue-crack propagation along ceramic/metal interfaces , 1991 .

[24]  P. D Neumann,et al.  The geometry of slip processes at a propagating fatigue crack—II , 1974 .

[25]  R. Pelloux,et al.  Crack extension by alternating shear , 1970 .

[26]  J. Field.  Fracture of Solids , 1964 .

[27]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[28]  C. Xu.  Thermoplastic adhesive bonding and its fracture analysis , 2001 .

[29]  P. Davies,et al.  Mixed mode failure criteria for a glass/epoxy composite and an adhesively bonded composite/composite joint , 2000 .

[30]  Anthony G. Evans,et al.  MECHANICS OF MATERIALS: TOP-DOWN APPROACHES TO FRACTURE , 2000 .

[31]  Ali Fatemi,et al.  Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials , 1998 .

[32]  J. K. Spelt,et al.  Observations of fatigue crack initiation and propagation in an epoxy adhesive , 1997 .

[33]  J. Shang,et al.  Subcritical crack growth at bimaterial interfaces: Part III. shear-enhanced fatigue crack growth resistance at polymer/metal interface , 1996 .

[34]  A. Chateauminois,et al.  A new testing methodology for the assessment of fatigue properties of structural adhesives , 1996 .

[35]  J. Lankford,et al.  Fatigue crack growth in metals and alloys: mechanisms and micromechanics , 1992 .

[36]  S. Suresh.  Fatigue of materials , 1991 .

[37]  A. Needleman.  An analysis of decohesion along an imperfect interface , 1990 .

[38]  Norman A. Fleck,et al.  Finite element analysis of plasticity-induced crack closure under plane strain conditions , 1986 .

[39]  S. Antolovich,et al.  Effect of Microstructure on Fatigue Crack Propagation: A Review of Existing Models and Suggestions for Further Research , 1983 .

[40]  D. Davidson,et al.  Quantitative Measurement of Energy Associated with a Moving Fatigue Crack , 1983 .

[41]  J. Newman.  A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading , 1981 .

[42]  N. Dowling,et al.  Fatigue Crack Growth During Gross Plasticity and the J-Integral , 1976 .

[43]  W. Elber.  The Significance of Fatigue Crack Closure , 1971 .

[44]  John R. Rice,et al.  Mechanics of Crack Tip Deformation and Extension by Fatigue , 1967 .

[45]  C. Laird.  The Influence of Metallurgical Structure on the Mechanisms of Fatigue Crack Propagation , 1967 .

[46]  G. I. Barenblatt.  THE MATHEMATICAL THEORY OF EQUILIBRIUM CRACKS IN BRITTLE FRACTURE , 1962 .

[47]  P. Paris.  A rational analytic theory of fatigue , 1961 .