Surface coating by mechanofusion modulates bulk charging pathways and battery performance of Ni-rich layered cathodes

Ni-rich layered oxides as high-capacity battery cathodes suffer from degradation at high voltages. We utilize a dry surface modification method, mechanofusion (MF), to achieve enhanced battery stability. The simplicity, high yield, and flexibility make it cost-effective and highly attractive for processing at the industrial scale. The underlying mechanisms responsible for performance improvement are unveiled by a systematic study combining multiple probes, e.g., 3D nano-tomography, spectroscopic imaging, in situ synchrotron diffraction, and finite element analysis (FEA). MF affects the bulk crystallography by introducing partially disordered structure, microstrain, and local lattice variation. Furthermore, the crack initiation and propagation pattern during delithiation are regulated and the overall mechanical fracture is reduced after such surface coating. We validate that MF can alter the bulk charging pathways. Such a synergic effect between surface modification and bulk charge distribution is fundamentally important for designing next-generation battery cathode materials.

[1]  Zhengrui Xu,et al.  Rigid registration algorithm based on the minimization of the total variation of the difference map , 2022, Journal of synchrotron radiation.

[2]  Zhengrui Xu,et al.  Effect of the grain arrangements on the thermal stability of polycrystalline nickel-rich lithium-based battery cathodes , 2022, Nature Communications.

[3]  Yijin Liu,et al.  Dynamics of particle network in composite battery cathodes , 2022, Science.

[4]  Zhengrui Xu,et al.  TXM-Sandbox: an open-source software for transmission X-ray microscopy data analysis , 2022, Journal of synchrotron radiation.

[5]  I. Belharouak,et al.  Valuation of Surface Coatings in High-Energy Density Lithium-ion Battery Cathode Materials , 2021 .

[6]  J. Janek,et al.  Facile Dry Coating Method of High‐Nickel Cathode Material by Nanostructured Fumed Alumina (Al 2 O 3 ) Improving the Performance of Lithium‐Ion Batteries , 2021 .

[7]  Yang‐Kook Sun,et al.  Optimized Ni‐Rich NCMA Cathode for Electric Vehicle Batteries , 2021, Advanced Energy Materials.

[8]  Chaodi Xu,et al.  Phase Behavior during Electrochemical Cycling of Ni‐Rich Cathode Materials for Li‐Ion Batteries , 2020, Advanced Energy Materials.

[9]  Xianghui Xiao,et al.  Probing Dopant Redistribution, Phase Propagation, and Local Chemical Changes in the Synthesis of Layered Oxide Battery Cathodes , 2020, Advanced Energy Materials.

[10]  Yangguang Shi,et al.  Facile and scalable dry surface doping technique to enhance the electrochemical performance of LiNi0.64Mn0.2Co0.16O2 cathode materials , 2020 .

[11]  Seung‐Taek Myung,et al.  Recent Progress and Perspective of Advanced High‐Energy Co‐Less Ni‐Rich Cathodes for Li‐Ion Batteries: Yesterday, Today, and Tomorrow , 2020, Advanced Energy Materials.

[12]  Yijin Liu,et al.  Mutual modulation between surface chemistry and bulk microstructure within secondary particles of nickel-rich layered oxides , 2020, Nature Communications.

[13]  J. Dahn,et al.  Impact of Aluminum Added to Ni-Based Positive Electrode Materials by Dry Particle Fusion , 2020 .

[14]  J. Dahn,et al.  A Low-Cost Instrument for Dry Particle Fusion Coating of Advanced Electrode Material Particles at the Laboratory Scale , 2020 .

[15]  M. Obrovac,et al.  Engineered Particle Synthesis by Dry Particle Microgranulation , 2020 .

[16]  Luyi Yang,et al.  Harnessing the surface structure to enable high-performance cathode materials for lithium-ion batteries. , 2020, Chemical Society reviews.

[17]  M. Doeff,et al.  Thermal stress-induced charge and structure heterogeneity in emerging cathode materials , 2020, Materials Today.

[18]  Xianghui Xiao,et al.  Emerging X-ray imaging technologies for energy materials , 2020 .

[19]  D. Nordlund,et al.  Structural and Electrochemical Impacts of Mg/Mn Dual Dopants on the LiNiO2 Cathode in Li-Metal Batteries. , 2020, ACS applied materials & interfaces.

[20]  M. Doeff,et al.  Distinct Surface and Bulk Thermal Behaviors of LiNi0.6Mn0.2Co0.2O2 Cathode Materials as a Function of State-of-Charge. , 2020, ACS applied materials & interfaces.

[21]  P. Yan,et al.  Charge distribution guided by grain crystallographic orientations in polycrystalline battery materials , 2020, Nature Communications.

[22]  Jonghyun Park,et al.  A new aspect of the Li diffusion enhancement mechanism of ultra-thin coating layer on electrode materials. , 2019, ACS applied materials & interfaces.

[23]  M. Obrovac,et al.  Spherically Smooth Cathode Particles by Mechanofusion Processing , 2019, Journal of The Electrochemical Society.

[24]  T. Hatchard,et al.  Mechanofusion-derived Si-alloy/graphite composite electrode materials for Li-ion batteries , 2019, Journal of Materials Chemistry A.

[25]  Kent J. Griffith,et al.  Evolution of Structure and Lithium Dynamics in LiNi0.8Mn0.1Co0.1O2 (NMC811) Cathodes during Electrochemical Cycling , 2019, Chemistry of Materials.

[26]  Stefano Ermon,et al.  High‐Voltage Charging‐Induced Strain, Heterogeneity, and Micro‐Cracks in Secondary Particles of a Nickel‐Rich Layered Cathode Material , 2019, Advanced Functional Materials.

[27]  T. Hatchard,et al.  A high-quality mechanofusion coating for enhancing lithium-ion battery cathode material performance , 2019, MRS Communications.

[28]  Piero Pianetta,et al.  Thermally driven mesoscale chemomechanical interplay in Li0.5Ni0.6Mn0.2Co0.2O2 cathode materials , 2018 .

[29]  Feng Lin,et al.  Chemomechanical behaviors of layered cathode materials in alkali metal ion batteries , 2018 .

[30]  Zonghai Chen,et al.  Cationic Ordering Coupled to Reconstruction of Basic Building Units during Synthesis of High-Ni Layered Oxides. , 2018, Journal of the American Chemical Society.

[31]  K. Zhao,et al.  Disintegration of Meatball Electrodes for LiNixMnyCozO2 Cathode Materials , 2018 .

[32]  Chong Seung Yoon,et al.  Capacity Fading of Ni-Rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation? , 2018 .

[33]  Andrew M. Kiss,et al.  To get the most out of high resolution X-ray tomography: A review of the post-reconstruction analysis , 2016 .

[34]  Steven M. George,et al.  Effect of Al2O3 Coating on Stabilizing LiNi0.4Mn0.4Co0.2O2 Cathodes , 2015 .

[35]  V. Prakapenka,et al.  DIOPTAS: a program for reduction of two-dimensional X-ray diffraction data and data exploration , 2015 .

[36]  Brian H. Toby,et al.  GSAS‐II: the genesis of a modern open‐source all purpose crystallography software package , 2013 .

[37]  K. Wiaderek,et al.  The AMPIX electrochemical cell: a versatile apparatus for in situ X-ray scattering and spectroscopic measurements , 2012 .

[38]  Phillip A. Williams,et al.  TXM-Wizard: a program for advanced data collection and evaluation in full-field transmission X-ray microscopy , 2012, Journal of synchrotron radiation.

[39]  Ilias Belharouak,et al.  High-energy cathode material for long-life and safe lithium batteries. , 2009, Nature materials.

[40]  Sang Hyo Lee,et al.  Effects of Co3(PO4)2 coatings on LiNi0.8Co0.16Al0.04O2 cathodes during application of high current , 2008 .

[41]  Xiao‐Qing Yang,et al.  A comparative study on structural changes of LiCo1/3Ni1/3Mn1/3O2 and LiNi0.8Co0.15Al0.05O2 during first charge using in situ XRD , 2006 .

[42]  G. Fey,et al.  MgAl2O4 spinel-coated LiCoO2 as long-cycling cathode materials , 2005 .

[43]  R. Davé,et al.  Synthesis of engineered particulates with tailored properties using dry particle coating , 2001 .

[44]  A. Jouanneaux,et al.  A qualitative account for anisotropic broadening in whole-powder-diffraction-pattern fitting by second-rank tensors , 1997 .

[45]  N. Otsu.  A threshold selection method from gray level histograms , 1979 .