Performance of CO preferential oxidation reactor with noble-metal catalyst coated on ceramic monolith for on-board fuel processing applications

Abstract On-board fuel processors are being developed to provide hydrogen-rich gas to the polymer electrolyte fuel cell automotive propulsion systems. Whereas the anode catalyst in the fuel cell has low tolerance for carbon monoxide, 10–100 ppm, reforming of gasoline and other hydrocarbon fuels generally produces 1–2% of CO. Of the many methods of removing CO from the reformer gas, preferential oxidation (PrOx) of CO over noble-metal catalysts is practiced most frequently. In this paper, we present experimental data for CO conversion on a Pt-based catalyst that is active at room temperature and was coated on a ceramic monolith. The data is used to develop an empirical correlation for selectivity for CO oxidation as a function of CO concentration and oxygen stoichiometry at 30,000–80,000/h space velocity. The selectivity correlation is used in a model to analyze the performance of multi-stage, adiabatic PrOx reactors with heat exchange between the stages to cool the reformate to 100 °C. An optimization algorithm is used to determine the operating conditions that can reduce CO concentration to 10 ppm while minimizing parasitic loss of H2 in the reformate stream. It is found that the 10 ppm constraint limits the maximum inlet CO concentration to 1.05% in a single-stage reactor and to 3.1% in a two-stage reactor. The results clearly show the incremental reduction in parasitic H2 loss by addition of second and third stages.