Application of micro- and nanotechnologies for the fabrication of optical devices

The development of micro-opto-electro-mechanical systems (MOEMS) and devices no longer focuses on feasibility studies and expensive demonstrators. On the contrary, fabrication of micro-optical components is already feeding dynamic markets with a large variety of products that are more or less on the verge of inexpensive mass production. A major application area for MOEMS is, without any doubt, tele- and datacommunications, while miniature optical sensors (e.g. spectrometers and interferometers) have a growing part in many kinds of biotechnological, chemical and pharmaceutical applications. In this presentation numerous examples for optical microstructures are given that range from the field of low cost fiberoptic components to polymer waveguide elements, from fiber switches to mass-producible microlenses made of thermoplastics or glass, and from microstructured photonic bandgap materials to optical sensor tips for investigating nanostructures. It is emphasized that for realizing MOEMS very different materials have to be processed while the necessary hybrid integration demands for specific automated assembly methods. In particular, the examples given show now microtechnologies can be adapted and combined with each other to take into account the special requirements of the product.

[1]  R. Ramsamoedj,et al.  Optical polymers and related photonic devices , 1994, Optics & Photonics.

[2]  W. Ehrfeld,et al.  Micro-optical components for fiber and integrated optics realized by the LIGA technique , 1995, Proceedings IEEE Micro Electro Mechanical Systems. 1995.

[3]  Lars Erdmann,et al.  Technique for monolithic fabrication of silicon microlenses with selectable rim angles , 1997 .

[4]  Wolfgang Ehrfeld,et al.  Polymer waveguides for telecom, datacom, and sensor applications , 1998, Photonics West.

[5]  Wolfgang Ehrfeld,et al.  Fabrication of photonic crystals by deep x-ray lithography , 1997 .

[6]  Robert E. Parks.  Overview Of Optical Manufacturing Methods , 1982, Optics & Photonics.

[7]  Wilfried Noell,et al.  Micromachined aperture probe tip for multifunctional scanning probe microscopy , 1997 .

[8]  Wilfried Noell,et al.  Micromachined aperture probe tip for multifunctional scanning probe microscopy , 1997, Other Conferences.

[9]  M. Hutley,et al.  The manufacture of microlenses by melting photoresist , 1990 .

[10]  N. Sloane,et al.  Hadamard transform optics , 1979 .

[11]  Margaret B. Stern,et al.  Preshaping photoresist for refractive microlens fabrication , 1994 .

[12]  Michael Abraham,et al.  Ultra-long glass tips for atomic force microscopy , 1996 .

[13]  K. Hesch,et al.  Combination of excimer laser micromachining and replication processes suited for large scale production , 1995 .

[14]  Wolfgang Ehrfeld,et al.  Synchrotron radiation and the LIGA technique , 1994 .

[15]  G. Connell,et al.  Technique for monolithic fabrication of microlens arrays. , 1988, Applied optics.

[16]  Jens Schulze,et al.  Compact self-aligning assemblies with refractive microlens arrays made by contactless embossing , 1998, Photonics West.

[17]  W. Ehrfeld,et al.  Deep X-ray lithography for the production of three-dimensional microstructures from metals, polymers and ceramics , 1995 .

[18]  Jan Vandewege,et al.  High precision LIGA structures for optical fibre-in-board technology , 1996 .

[19]  Stewart E. Miller,et al.  Chapter 1 – Evolution of Optical Communications , 1979 .

[20]  W. Ehrfeld,et al.  Three-dimensional microfabrication using synchrotron radiation , 1991 .

[21]  Koichi Imanaka,et al.  Low-cost and compact fiber-to-laser coupling with micro-Fresnel lens , 1991, Optics & Photonics.

[22]  Chandrasekhar Roychoudhuri,et al.  Miniature and Micro-Optics: Fabrication and System Applications II , 1993 .

[23]  A. Schawlow,et al.  Infrared and optical masers , 1958 .

[24]  K. R. Maschhoff,et al.  Binary Optics Microlens Arrays in CdTe. , 1990 .