From ferroconcrete to Cf/UHTC-SiC: A totally novel densification method and mechanism at 1300 °C without pressure

[1]  Yuan Cheng,et al.  One-step introduction of ZrC-SiC inside carbon fabric to fabricate high homogeneous and damage-tolerant composite inspired by vibration , 2019, Journal of the European Ceramic Society.

[2]  Yu Bai,et al.  Connections and structural applications of fibre reinforced polymer composites for civil infrastructure in aggressive environments , 2019, Composites Part B: Engineering.

[3]  P. Feng,et al.  Dynamic oxidation protective ultrahigh temperature ceramic TaB2-20%wtSiC composite coating for carbon material , 2019, Composites Part B: Engineering.

[4]  A. Ravindran,et al.  Synergistic delamination toughening of composites using multi-scale carbon reinforcements , 2019, Composites Part B: Engineering.

[5]  Weiguo Li,et al.  Temperature dependent fracture toughness of the particulate-reinforced ultra-high-temperature-ceramics considering effects of change in critical flaw size and plastic power , 2019, Composites Part B: Engineering.

[6]  Yuan Cheng,et al.  Using PyC coated short chopped carbon fiber to tackle the dilemma between toughness and strength of ZrC-SiC , 2019, Ceramics International.

[7]  Xiaohong Shi,et al.  In-situ homogeneous growth of ZrC nanowires on carbon cloth and their effects on flexural properties of carbon/carbon composites , 2018, Composites Part B: Engineering.

[8]  Yuan Cheng,et al.  Damage mechanism analysis to the carbon fiber and fiber-ceramic interface tailoring of Cf/ZrC-SiC using PyC coating , 2018, Ceramics International.

[9]  Yuan Cheng,et al.  Architectural engineering inspired method of preparing Cf /ZrC-SiC with graceful mechanical responses , 2018, Journal of the American Ceramic Society.

[10]  D. Bhattacharyya,et al.  Graphene-based materials and their composites: A review on production, applications and product limitations , 2018, Composites Part B: Engineering.

[11]  H. Hu,et al.  A meltable precursor for zirconium carbide ceramics and C/C-ZrC composites , 2018, Ceramics International.

[12]  Yiguang Wang,et al.  Carbon fiber reinforced silicon carbide composite-based sharp leading edges in high enthalpy plasma flows , 2018 .

[13]  Yang Wang,et al.  Improved sandwich structured ceramic matrix composites with excellent thermal insulation , 2017 .

[14]  S. R. Bakshi,et al.  In-situ formed graphene nanoribbon induced toughening and thermal shock resistance of spark plasma sintered carbon nanotube reinforced titanium carbide composite , 2017 .

[15]  Ruzhuang Wang.  Determining fracture strength and critical flaw of the ZrB2–SiC composites on high temperature oxidation using theoretical method , 2017 .

[16]  Sha Jianjun,et al.  Effect of multi-walled carbon nanotubes on microstructure and fracture properties of carbon fiber-reinforced ZrB2-based ceramic composite , 2017 .

[17]  Xinghong Zhang,et al.  High-performance ZrB2-SiC-Cf composite prepared by low-temperature hot pressing using nanosized ZrB2 powder , 2017 .

[18]  K. Mergia,et al.  Thermal shock performance of carbon-bonded carbon fiber composite and ceramic matrix composite joints for thermal protection re-entry applications , 2017 .

[19]  Zhongyi Zhang,et al.  ZrB2-based composites toughened by as-received and heat-treated short carbon fibers , 2017 .

[20]  K. Balani,et al.  Effect of carbon nanotube on processing, microstructural, mechanical and ablation behavior of ZrB2-20SiC based ultra-high temperature ceramic composites , 2017 .

[21]  J. Dai,et al.  Microstructure and mechanical properties of hot-pressed ZrC–Ti–CNTs composites , 2016 .

[22]  Xianghong Xu,et al.  Effect of SiC whiskers and graphene nanosheets on the mechanical properties of ZrB2-SiCw-Graphene ceramic composites , 2016 .

[23]  D. D. Fabbriche,et al.  Novel light and tough ZrB2-based functionally graded ceramics , 2016 .

[24]  G. Hilmas,et al.  Effect of a weak fiber interface coating in ZrB2 reinforced with long SiC fibers , 2015 .

[25]  William E Lee,et al.  Development of multi-layered thermal protection system (TPS) for aerospace applications , 2015 .

[26]  Jinshan Yu,et al.  The properties of Cf/SiC composites prepared from different precursors , 2015 .

[27]  S. Foucaud,et al.  Oxidation behavior of spark plasma sintered ZrC–SiC composites obtained from the polymer-derived ceramics route , 2014 .

[28]  Song Wang,et al.  Fabrication and characterization of 3-D Cf/ZrC composites by low-temperature liquid metal infiltration , 2014 .

[29]  S. Dong,et al.  Fabrication and comparison of 3D Cf/ZrC–SiC composites using ZrC particles/polycarbosilane and ZrC precursor/polycarbosilane , 2012 .

[30]  S. Dong,et al.  Fabrication and Properties of 3‐D Cf/SiC–ZrC Composites, Using ZrC Precursor and Polycarbosilane , 2012 .

[31]  Bo-Hye Kim,et al.  Preparation of anti-oxidative carbon fiber at high temperature , 2010 .

[32]  Thomas H. Squire,et al.  Material property requirements for analysis and design of UHTC components in hypersonic applications , 2010 .

[33]  Jiecai Han,et al.  Microstructural feature and thermal shock behavior of hot-pressed ZrB2–SiC–ZrO2 composite , 2009 .

[34]  S. Guo,et al.  Densification of ZrB2-based composites and their mechanical and physical properties: A review , 2009 .

[35]  Xinghong Zhang,et al.  Effect of graphite flake on the mechanical properties of hot pressed ZrB2–SiC ceramics , 2008 .

[36]  Hu Haifeng,et al.  Preparation of 3D-Cf/SiC composites at low temperatures , 2008 .