In-Fiber Mach-Zehnder Interferometer Based on Three-Core Fiber for Measurement of Directional Bending

A highly sensitive directional bending sensor based on a three-core fiber (TCF) Mach-Zehnder interferometer (MZI) is presented in this study. This MZI-based bending sensor was fabricated by fusion-splicing a section of TCF between two single-mode fibers (SMF) with core-offset. Due to the location of the core in the TCF, a bend applied to the TCF-based MZI led to an elongation or shortening of the core, which makes the sensor suitable for directional bending measurement. To analyze the bending characteristics, two types of TCF-based sensors, with the fusion-spliced core located at different positions between the SMFs, were investigated. A swept source was employed in the measurement technique. The experimental results showed that, for the two types of sensors in this setup, the bending sensitivities of the two sensors were 15.36 nm/m−1 and 3.11 nm/m−1 at the bending direction of 0°, and −20.48 nm/m−1 and −5.29 nm/m−1 at the bending direction of 180°. The temperature sensitivities of the two sensors were 0.043 nm/°C and 0.041 nm/°C, respectively. The proposed sensors are compact, versatile, inexpensive to fabricate, and are expected to have potential applications in biomedical sensing.

[1]  Li Wang,et al.  A Mach–Zehnder interferometer constructed using lateral offset and a long period fiber grating for two-dimensional bending vector sensing , 2013 .

[2]  Ian Bennion,et al.  Bend sensors with direction recognition based on long-period gratings written in D-shaped fiber. , 2004, Applied optics.

[3]  Young-Geun Han,et al.  Bending sensitivity of long-period fiber gratings inscribed in holey fibers depending on an axial rotation angle. , 2007, Optics express.

[4]  Yi-Ping Wang,et al.  A novel long period fiber grating sensor measuring curvature and determining bend-direction simultaneously , 2005, IEEE Sensors Journal.

[5]  Libo Yuan,et al.  Two-Axis Bending Sensor Based on Cascaded Eccentric Core Fiber Bragg Gratings , 2016, IEEE Photonics Technology Letters.

[6]  Xun Hou,et al.  Compact bending sensor based on a fiber Bragg grating in an abrupt biconical taper. , 2015, Optics express.

[7]  Changyuan Yu,et al.  High Sensitivity Optical Fiber Curvature Sensor Based on Cascaded Fiber Interferometer , 2018, Journal of Lightwave Technology.

[8]  Li Wang,et al.  A Fiber Bending Vector Sensor Based on M–Z Interferometer Exploiting Two Hump-Shaped Tapers , 2015, IEEE Photonics Technology Letters.

[9]  Huiyong Guo,et al.  An In-Fiber Dual Air-Cavity Fabry–Perot Interferometer for Simultaneous Measurement of Strain and Directional Bend , 2017, IEEE Sensors Journal.

[10]  Roger Haynes,et al.  Long period grating in multicore optical fiber: an ultra-sensitive vector bending sensor for low curvatures. , 2014, Optics letters.

[11]  Tao Zhu,et al.  Highly sensitive bend sensor based on Mach–Zehnder interferometer using photonic crystal fiber , 2011 .

[12]  Ling-Xin Kong,et al.  Concave-lens-like long-period fiber grating bidirectional high-sensitivity bending sensor. , 2017, Optics letters.

[13]  Bo Liu,et al.  Effect of bending and orientation on the fiber modal mach–zehnder interferometer , 2012 .

[14]  Jing Zhao,et al.  Asymmetrical in-fiber Mach-Zehnder interferometer for curvature measurement. , 2015, Optics express.

[15]  Wojtek J. Bock,et al.  Highly sensitive bend sensor with hybrid long-period and tilted fiber Bragg grating , 2010 .

[16]  Lie Yu,et al.  Quantitative method for gait pattern detection based on fiber Bragg grating sensors , 2017, Journal of biomedical optics.

[17]  K. Sooley,et al.  Tapered fiber Mach–Zehnder interferometer for simultaneous measurement of refractive index and temperature , 2009 .

[18]  Hans-Peter Loock,et al.  In-fiber Mach-Zehnder interferometer for gas refractive index measurements based on a hollow-core photonic crystal fiber. , 2016, Optics express.

[19]  Salvador Sales,et al.  Measurement uncertainty of multicore optical fiber sensors used to sense curvature and bending direction , 2019, Measurement.

[20]  Xuewen Shu,et al.  Compact assembly-free vector bend sensor based on all-in-fiber-core Mach-Zehnder interferometer. , 2018, Optics letters.

[21]  Li Wang,et al.  Bending Vector Sensor Based on a Sector-Shaped Long-Period Grating , 2015, IEEE Photonics Technology Letters.

[22]  Shizhuo Yin,et al.  Multiple parameter vector bending and high-temperature sensors based on asymmetric multimode fiber Bragg gratings inscribed by an infrared femtosecond laser. , 2006, Optics letters.

[23]  Zhifang Wu,et al.  Simultaneous measurement of curvature and strain based on fiber Bragg grating in two-dimensional waveguide array fiber. , 2013, Optics letters.

[24]  Kyunghwan Oh,et al.  High sensitivity temperature measurement via mask-free hybrid polymer long period fiber grating. , 2018, Optics express.

[25]  Yongqin Yu,et al.  Micro-bending vector sensor based on six-air-hole grapefruit microstructure fiber using lateral offset splicing. , 2015, Optics express.

[26]  Zhishen Wu,et al.  Multimode Interference in Single Mode–Multimode FBG for Simultaneous Measurement of Strain and Bending , 2015, IEEE Sensors Journal.

[27]  Xiaofeng Xu,et al.  Phase-Shifted Eccentric Core Fiber Bragg Grating Fabricated by Electric Arc Discharge for Directional Bending Measurement , 2018, Sensors.

[28]  Sumei Wang,et al.  Pressure and Temperature Sensor Based on Graphene Diaphragm and Fiber Bragg Gratings , 2018, IEEE Photonics Technology Letters.

[29]  Libo Yuan,et al.  Pure Directional Bending Measurement With a Fiber Bragg Grating at the Connection Joint of Eccentric-Core and Single-Mode Fibers , 2016, Journal of Lightwave Technology.

[30]  Li Wang,et al.  Two-dimensional bending vector sensor based on Mach–Zehnder interferometer of two orthogonal lateral-offsets , 2015 .