Porous TiO2 with a controllable bimodal pore size distribution from natural ilmenite

Ilmenite (FeTiO3) is an inexpensive abundant natural mineral and it would be a perfect precursor for the production of porous TiO2 if a suitable synthesis method was developed. A new method combining a series of processing steps of ball milling, high-temperature annealing, selective chemical leaching and final calcining in air is proposed in this paper. The resulting TiO2 is a porous material with a bimodal pore structure. The pore size distribution has two clear maxima corresponding to small mesopores (2–30 nm) and large meso- and macropores (centered at around 50–80 nm). It was found that the duration of the annealing step could alter the contribution of each type of pores. A short annealing time (0.5 h) lead to the preferential formation of pores within 2–30 nm while pores centered at 50–80 nm dominated the pore size distribution after a relatively long annealing (1.5 h). The obtained porous rutile TiO2 shows a better photocatalytic activity than that of a commercial rutile TiO2 powder.

[1]  Z. Su,et al.  Syntheses, Li Insertion, and Photoactivity of Mesoporous Crystalline TiO2 , 2009 .

[2]  A. Manivannan,et al.  Origin of photocatalytic activity of nitrogen-doped TiO2 nanobelts. , 2009, Journal of the American Chemical Society.

[3]  Liduo Wang,et al.  A simple and efficient method using polymer dispersion to prepare controllable nanoporous TiO2 anodes for dye-sensitized solar cells. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[4]  D. Zhao,et al.  Mesoporous Monocrystalline TiO2 and Its Solid-State Electrochemical Properties , 2009 .

[5]  A. Glushenkov,et al.  Titanium Oxide Nanorods Extracted From Ilmenite Sands , 2009 .

[6]  Xiaoqing Wang,et al.  Preparation of porous rutile titania from ilmenite by mechanical activation and subsequent sulfuric acid leaching , 2008 .

[7]  Jin Zhai,et al.  Enhanced photocatalytic activity of hierarchically micro-/nano-porous TiO2 films , 2008 .

[8]  K. Landfester,et al.  Porous anatase nanoparticles with high specific surface area prepared by miniemulsion technique , 2008 .

[9]  T. Peng,et al.  Effect of Annealing Temperature on the Photoelectrochemical Properties of Dye-Sensitized Solar Cells Made with Mesoporous TiO2 Nanoparticles , 2008 .

[10]  Bin Liang,et al.  Preparation of synthetic rutile by hydrochloric acid leaching of mechanically activated Panzhihua ilmenite , 2008 .

[11]  Qun Xu,et al.  Porous TiO2/SiO2 composite prepared using PEG as template direction reagent with assistance of supercritical CO2 , 2007 .

[12]  Dong Suk Kim,et al.  Synthesis and photocatalytic activity of mesoporous TiO(2) with the surface area, crystallite size, and pore size. , 2007, Journal of colloid and interface science.

[13]  Yunfeng Lu,et al.  Mesoporous titania spheres with tunable chamber stucture and enhanced photocatalytic activity. , 2007, Journal of the American Chemical Society.

[14]  F. Iskandar,et al.  Enhanced Photocatalytic Performance of Brookite TiO2 Macroporous Particles Prepared by Spray Drying with Colloidal Templating , 2007 .

[15]  Bin Liang,et al.  Combined milling–dissolution of Panzhihua ilmenite in sulfuric acid , 2006 .

[16]  Shiao‐Shing Chen,et al.  Sol–hydrothermal preparation and photocatalysis of titanium dioxide , 2006 .

[17]  T. Lee,et al.  Preparation and characterization of mesoporous TiO2 particles by modified sol–gel method using ionic liquids , 2005 .

[18]  K. Hirao,et al.  Synthesis of titanium dioxide nanoparticles with mesoporous anatase wall and high photocatalytic activity. , 2005, The journal of physical chemistry. B.

[19]  Bo-Qing Xu,et al.  Hydrothermal preparation of mesoporous TiO2 powder from Ti(SO4)2 with poly(ethylene glycol) as template , 2003 .

[20]  Clément Sanchez,et al.  Synthesis and Characterization of Mesostructured Titania-Based Materials through Evaporation-Induced Self-Assembly , 2002 .

[21]  Z. Deng,et al.  The synthesis of nanocrystalline anatase and rutile titania in mixed organic media. , 2001, Inorganic chemistry.

[22]  Ying Chen,et al.  Increased dissolution of ilmenite induced by high-energy ball milling , 1999 .

[23]  T. Chernet.  Applied mineralogical studies on Australian sand ilmenite concentrate with special reference to its behaviour in the sulphate process , 1999 .

[24]  T. Lwin,et al.  The dissolution of iron in the hydrochloric acid leach of an ilmenite concentrate , 1999 .

[25]  James Williams,et al.  Mechanically activated carbothermic reduction of ilmenite , 1997 .

[26]  N. Welham.  A parametric study of the mechanically activated carbothermic reduction of ilmenite , 1996 .

[27]  James Williams,et al.  Ball milling induced low-temperature carbothermic reduction of ilmenite , 1996 .

[28]  James Williams,et al.  Influence of milling temperature and atmosphere on the synthesis of iron nitrides by ball milling , 1996 .

[29]  R. W. Matthews.  Kinetics of photocatalytic oxidation of organic solutes over titanium dioxide , 1988 .

[30]  T.A.I. Lasheen,et al.  Chemical benefication of Rosetta ilmenite by direct reduction leaching , 2005 .

[31]  Jiaguo Yu,et al.  Rapid synthesis of mesoporous TiO2 with high photocatalytic activity by ultrasound-induced agglomeration , 2002 .

[32]  T. O'donnell,et al.  A Novel Fluoride Process for Producing TiO2 from Titaniferous Ore , 1995 .