Modeling and parametric simulations of solid oxide fuel cells with methane carbon dioxide reforming

[1]  Meng Ni,et al.  2D thermal-fluid modeling and parametric analysis of a planar solid oxide fuel cell , 2010 .

[2]  Q. Ma,et al.  A high-performance ammonia-fueled solid oxide fuel cell , 2006 .

[3]  S. Chan,et al.  A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness , 2001 .

[4]  Vinod M. Janardhanan,et al.  Non-commercial Research and Educational Use including without Limitation Use in Instruction at Your Institution, Sending It to Specific Colleagues That You Know, and Providing a Copy to Your Institution's Administrator. All Other Uses, Reproduction and Distribution, including without Limitation Comm , 2022 .

[5]  D. Leung,et al.  Parametric study of solid oxide fuel cell performance , 2007 .

[6]  O. Deutschmann,et al.  Methane reforming kinetics within a Ni–YSZ SOFC anode support , 2005 .

[7]  Vincent Heuveline,et al.  Performance analysis of a SOFC under direct internal reforming conditions , 2007 .

[8]  Analysis of parameter effects on transport phenomena in conjunction with chemical reactions in ducts relevant for methane reformers , 2007 .

[9]  I. Yentekakis,et al.  Open-and closed-circuit study of an intermediate temperature SOFC directly fueled with simulated biogas mixtures , 2006 .

[10]  B. Haberman,et al.  Three-dimensional simulation of chemically reacting gas flows in the porous support structure of an integrated-planar solid oxide fuel cell , 2004 .

[11]  George E. Marnellos,et al.  A detailed model for transport processes in a methane fed planar SOFC , 2011 .

[12]  I. Dincer,et al.  Thermodynamic modeling of direct internal reforming solid oxide fuel cells operating with syngas , 2007 .

[13]  Peiwen Li,et al.  Analysis of chemical, electrochemical reactions and thermo-fluid flow in methane-feed internal reforming SOFCs: Part I – Modeling and effect of gas concentrations , 2012 .

[14]  W. Bessler,et al.  A new framework for physically based modeling of solid oxide fuel cells , 2007 .

[15]  Alex C. Hoffmann,et al.  Transport, chemical and electrochemical processes in a planar solid oxide fuel cell: Detailed three-dimensional modeling , 2010 .

[16]  B. Sundén,et al.  Grading the amount of electrochemcial active sites along the main flow direction of an SOFC , 2013 .

[17]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[18]  M. Ni.  Electrolytic effect in solid oxide fuel cells running on steam/methane mixture , 2011 .

[19]  M. Ni.  On the source terms of species equations in fuel cell modeling , 2009 .

[20]  Christopher Hebling,et al.  Micro-Fuel Cells , 2008 .

[21]  Kurtis P. Recknagle,et al.  Modeling of electrochemistry and steam–methane reforming performance for simulating pressurized solid oxide fuel cell stacks , 2010 .

[22]  S. Soloviev,et al.  Carbon dioxide reforming of methane on monolithic Ni/Al2O3-based catalysts , 2011 .

[23]  Chao-Yang Wang,et al.  Fundamental Models for Fuel Cell Engineering , 2004 .

[24]  E. Ivers-Tiffée,et al.  Kinetics of (reversible) internal reforming of methane in solid oxide fuel cells under stationary and APU conditions , 2010 .

[25]  Local Non‐Equilibrium Thermal Effects in Solid Oxide Fuel Cells with Various Fuels , 2013 .

[26]  Tatsuya Kodama,et al.  Kinetics of CO2 Reforming of Methane by Catalytically Activated Metallic Foam Absorber for Solar Receiver-Reactors , 2008 .

[27]  Yoshio Matsuzaki,et al.  Electrochemical Oxidation of H 2 and CO in a H 2 ‐ H 2 O ‐ CO ‐ CO 2 System at the Interface of a Ni‐YSZ Cermet Electrode and YSZ Electrolyte , 2000 .

[28]  T. S. Zhao,et al.  Micro fuel cells : principles and applications , 2009 .

[29]  D. Moon,et al.  Electrocatalytic reforming of carbon dioxide by methane in SOFC system , 2003 .

[30]  M. Ni.  2D heat and mass transfer modeling of methane steam reforming for hydrogen production in a compact reformer , 2013 .

[31]  M. W. Chase.  NIST-JANAF thermochemical tables , 1998 .

[32]  I. Yentekakis,et al.  Catalytic and electrocatalytic behavior of Ni-based cermet anodes under internal dry reforming of CH4 + CO2 mixtures in SOFCs , 2006 .

[33]  Dehua Dong,et al.  Direct liquid methanol-fueled solid oxide fuel cell , 2008 .

[34]  Vinod M. Janardhanan,et al.  Numerical study of mass and heat transport in solid-oxide fuel cells running on humidified methane , 2007 .

[35]  Van P. Carey,et al.  The properties of gases & liquids: 4th Edition. Robert C. Reid, John M. Prausnitz, and Bruce E. Poling, McGraw-Hill Book Company, New York, NY, 1987, 741 pages, $49.50. , 1988 .

[36]  Vinod M. Janardhanan,et al.  Modeling Elementary Heterogeneous Chemistry and Electrochemistry in Solid-Oxide Fuel Cells , 2005 .

[37]  Bengt Sundén,et al.  SOFC modeling considering electrochemical reactions at the active three phase boundaries , 2012 .

[38]  Bengt Sundén,et al.  Three-dimensional computational analysis of gas and heat transport phenomena in ducts relevant for anode-supported solid oxide fuel cells , 2003 .

[39]  Dennis Y.C. Leung,et al.  Mathematical modeling of ammonia-fed solid oxide fuel cells with different electrolytes , 2008 .

[40]  Meng Ni,et al.  Modeling of SOFC running on partially pre-reformed gas mixture , 2012 .

[41]  Dennis Y.C. Leung,et al.  Electrochemical modeling and parametric study of methane fed solid oxide fuel cells , 2009 .

[42]  K. Kendall,et al.  High temperature solid oxide fuel cells : fundamentals, design and applicatons , 2003 .

[43]  R. Kee,et al.  Two-dimensional model of distributed charge transfer and internal reforming within unit cells of segmented-in-series solid-oxide fuel cells , 2011 .

[44]  R. Herbin,et al.  Three-dimensional numerical simulation for various geometries of solid oxide fuel cells , 1996 .

[45]  D. Leung,et al.  Modeling of methane fed solid oxide fuel cells: Comparison between proton conducting electrolyte and oxygen ion conducting electrolyte , 2008 .

[46]  I. Yentekakis,et al.  Long-term operation stability tests of intermediate and high temperature Ni-based anodes' SOFCs directly fueled with simulated biogas mixtures , 2012 .

[47]  Meng Ni,et al.  2D thermal modeling of a solid oxide electrolyzer cell (SOEC) for syngas production by H2O/CO2 co-electrolysis , 2012 .

[48]  Chia-Jung Hsu.  Numerical Heat Transfer and Fluid Flow , 1981 .

[49]  Zongping Shao,et al.  Coke formation and performance of an intermediate-temperature solid oxide fuel cell operating on dimethyl ether fuel , 2011 .