论文信息 - Hybrid Planar Inverted-F Antenna with a T-Shaped Slot on the Ground Plane

Hybrid Planar Inverted-F Antenna with a T-Shaped Slot on the Ground Plane

In this letter, a novel hybrid planar inverted-F antenna (PIFA) with a T-shaped slot on the ground plane is proposed. The loop structure formed by the feed line and shorting pin can be operated as a series and shunt inductance for the PIFA and the T-shaped slot antenna, respectively. The PIFA operates at a frequency of 1.75 GHz, while the T-shaped slot on the ground plane operates at 2.4 GHz by the same voltage feeding source. The height of the PIFA is 6.5 mm, and the size of an upper patch is designed to be 30 mm×16 mm. The measured relative impedance bandwidth of the PIFA and the T-shaped slot are about 12% and 21%, respectively. In addition, good antenna performance was achieved.

Hyeongdong Kim | Hyengcheul Choi | Sinhyung Jeon

[1] Chien-Wen Chiu,et al. Compact dual-band PIFA with multi-resonators , 2002 .

[2] C. Luxey,et al. Design of an internal quad-band antenna for mobile phones , 2004, IEEE Microwave and Wireless Components Letters.

[3] Cheol Sig Pyo,et al. An RFID Tag Using a Planar Inverted-F Antenna Capable of Being Stuck to Metallic Objects , 2006 .

[4] Kin-Lu Wong,et al. Dual‐band slot antenna for 2.4/5.2 GHz WLAN operation , 2002 .

[5] B.S. Yarman,et al. Design of ultra-wideband antenna matching networks , 2007, 2007 IEEE Applied Electromagnetics Conference (AEMC).

[6] M. Ali,et al. Modifying the ground plane and its effect on planar inverted-F antennas (PIFAs) for mobile phone handsets , 2003, IEEE Antennas and Wireless Propagation Letters.

[7] M.E. Bialkowski,et al. Improvement of compact terminal antenna performance by incorporating open-end slots in ground plane , 2004, IEEE Microwave and Wireless Components Letters.