Effect of negative stiffness nonlinearity on the vibration control effectiveness of tuned negative stiffness inerter damper

[1]  Ning Su,et al.  Analytical optimal design of inerter-based vibration absorbers with negative stiffness balancing static amplification and dynamic reduction effects , 2023, Mechanical Systems and Signal Processing.

[2]  Renjing Gao,et al.  A quasi-zero-stiffness elastic metamaterial for energy absorption and shock attenuation , 2023, Engineering Structures.

[3]  K. Bi,et al.  Development of a novel tuned negative stiffness inerter damper for seismic induced structural vibration control , 2023, Journal of Building Engineering.

[4]  Wensu Chen,et al.  Towards next generation design of sustainable, durable, multi-hazard resistant, resilient, and smart civil engineering structures , 2023, Engineering Structures.

[5]  Kun Xu,et al.  Inerter Nonlinearity and Its Influence on Control Efficiency of TMDI for Suppressing Vortex-Induced Vibration of Bridges , 2022, Journal of Bridge Engineering.

[6]  Li Ze,et al.  Analysis of a nonlinear tuned mass damper by using the multi-scale method , 2022, Journal of Theoretical and Applied Mechanics.

[7]  Jianchun Li,et al.  A quasi-active negative stiffness damper for structural vibration control under earthquakes , 2022, Mechanical Systems and Signal Processing.

[8]  Haoran Zuo,et al.  Development of novel track nonlinear energy sinks for seismic performance improvement of offshore wind turbine towers , 2022, Mechanical Systems and Signal Processing.

[9]  P. Tan,et al.  Optimal design of tuned viscous mass dampers based on effective damping ratio enhancement effect , 2022, Journal of Sound and Vibration.

[10]  Liqun Chen,et al.  Orthogonal six-DOFs vibration isolation with tunable high-static-low-dynamic stiffness: Experiment and analysis , 2022, International Journal of Mechanical Sciences.

[11]  Daolin Xu,et al.  Low-frequency Locally Resonant Band Gap of the Two-dimensional Quasi-zero-stiffness Metamaterials , 2022, International Journal of Mechanical Sciences.

[12]  Chuanyu Wu,et al.  Lever-type quasi-zero stiffness vibration isolator with magnetic spring , 2022, Journal of Sound and Vibration.

[13]  I. Antoniadis,et al.  Vertical seismic protection of structures with inerter-based negative stiffness absorbers , 2022, Bulletin of Earthquake Engineering.

[14]  A. Kenfack-Jiotsa,et al.  Parameters optimization and performance evaluation for the novel tuned inertial damper , 2022, Engineering Structures.

[15]  J. Z. Jiang,et al.  Tuning methods for tuned inerter dampers coupled to nonlinear primary systems , 2022, Nonlinear Dynamics.

[16]  Zhenhua Zhang,et al.  A novel lever-based-inerter-enhanced self-centering damping system to retrofit double-column bridge bent , 2021, Soil Dynamics and Earthquake Engineering.

[17]  Hao Wang,et al.  Optimum design and performance evaluation of the tuned inerter-negative-stiffness damper for seismic protection of single-degree-of-freedom structures , 2021, International Journal of Mechanical Sciences.

[18]  Hong Hao,et al.  Inerter-based structural vibration control: A state-of-the-art review , 2021 .

[19]  R. Jankowski,et al.  Mitigating the seismic pounding of multi-story buildings in series using linear and nonlinear fluid viscous dampers , 2021, Archives of Civil and Mechanical Engineering.

[20]  Jianchun Li,et al.  Modified Adaptive Negative Stiffness Device with Variable Negative Stiffness and Geometrically Nonlinear Damping for Seismic Protection of Structures , 2021 .

[21]  J. Ji,et al.  An innovative quasi-zero stiffness isolator with three pairs of oblique springs , 2021 .

[22]  H. Hao,et al.  A novel rotational inertia damper for amplifying fluid resistance: Experiment and mechanical model , 2021 .

[23]  Kun Ye,et al.  H∞ Optimization of Tuned Inerter Damper with Negative Stiffness Device Subjected to Support Excitation , 2020 .

[24]  J. Ji,et al.  A novel integrated quasi-zero stiffness vibration isolator for coupled translational and rotational vibrations , 2020, Mechanical Systems and Signal Processing.

[25]  Satish Nagarajaiah,et al.  Apparent-weakening by adaptive passive stiffness shaping along the height of multistory building using negative stiffness devices and dampers for seismic protection , 2020 .

[26]  Konstantinos A. Kapasakalis,et al.  Performance assessment of the KDamper as a seismic Absorption Base , 2020, Structural Control and Health Monitoring.

[27]  Yancheng Li,et al.  Negative stiffness devices for vibration isolation applications: A review , 2020 .

[28]  Tian He,et al.  Parameters optimization and performance evaluation for the novel inerter-based dynamic vibration absorbers with negative stiffness , 2019 .

[29]  S. Neild,et al.  Dynamic analysis and performance evaluation of nonlinear inerter-based vibration isolators , 2019, Nonlinear Dynamics.

[30]  David J. Wagg,et al.  Design and testing of a frictionless mechanical inerter device using living-hinges , 2019, J. Frankl. Inst..

[31]  Xiang Shi,et al.  A comparative study of vibration isolation performance using negative stiffness and inerter dampers , 2019, J. Frankl. Inst..

[32]  Li Cheng,et al.  Design and experiment of nonlinear absorber for equal-peak and de-nonlinearity , 2019, Journal of Sound and Vibration.

[33]  H. Hao,et al.  A novel rotational inertia damper for heave motion suppression of semisubmersible platform in the shallow sea , 2019, Structural Control and Health Monitoring.

[34]  Yuguo Sun,et al.  A novel cylindrical negative stiffness structure for shock isolation , 2019, Composite Structures.

[35]  Satish Nagarajaiah,et al.  Adjustable template stiffness device and SDOF nonlinear frequency response , 2019, Nonlinear Dynamics.

[36]  Branislav Titurus,et al.  Model identification methodology for fluid-based inerters , 2018, Mechanical Systems and Signal Processing.

[37]  Konstantinos Gryllias,et al.  KDamping: A stiffness based vibration absorption concept , 2018 .

[38]  Billie F. Spencer,et al.  Inertial mass damper for mitigating cable vibration , 2017 .

[39]  Xiang Shi,et al.  Simulation and optimization of magnetic negative stiffness dampers , 2017 .

[40]  D. Inman,et al.  An electromagnetic vibration absorber with harvesting and tuning capabilities , 2015 .

[41]  Giuseppe Habib,et al.  Nonlinear Generalization of Den Hartog's Equal-Peak Method , 2015, 1604.03868.

[42]  David J. Wagg,et al.  Using an inerter‐based device for structural vibration suppression , 2014 .

[43]  Zhiyi Zhang,et al.  Effect of the system imperfections on the dynamic response of a high-static-low-dynamic stiffness vibration isolator , 2014 .

[44]  Xiuchang Huang,et al.  On the characteristics of a quasi-zero stiffness isolator using Euler buckled beam as negative stiffness corrector , 2013 .

[45]  Michael C. Constantinou,et al.  Negative Stiffness Device for Seismic Protection of Structures , 2013 .

[46]  Xingjian Jing,et al.  The transmissibility of vibration isolators with cubic nonlinear damping under both force and base excitations , 2013 .

[47]  Michael J. Brennan,et al.  A comparison of two nonlinear damping mechanisms in a vibration isolator , 2013 .

[48]  Yeping Xiong,et al.  Dynamics and power flow behaviour of a nonlinear vibration isolation system with a negative stiffness mechanism , 2013 .

[49]  Kohju Ikago,et al.  Seismic control of single‐degree‐of‐freedom structure using tuned viscous mass damper , 2012 .

[50]  Ivana Kovacic,et al.  On the force transmissibility of a vibration isolator with quasi-zero stiffness , 2009 .

[51]  Oleg Gendelman,et al.  Strongly modulated response in forced 2DOF oscillatory system with essential mass and potential asymmetry , 2008 .

[52]  Michael J. Brennan,et al.  Static analysis of a passive vibration isolator with quasi-zero-stiffness characteristic , 2007 .

[53]  Oleg Gendelman,et al.  Attractors of harmonically forced linear oscillator with attached nonlinear energy sink. II: Optimization of a nonlinear vibration absorber , 2007 .

[54]  B. F. Spencer,et al.  STATE OF THE ART OF STRUCTURAL CONTROL , 2003 .

[55]  Malcolm C. Smith,et al.  Synthesis of mechanical networks: the inerter , 2002, Proceedings of the 41st IEEE Conference on Decision and Control, 2002..

[56]  M. Ren.  A VARIANT DESIGN OF THE DYNAMIC VIBRATION ABSORBER , 2001 .

[57]  A. K. Mallik,et al.  Performance of Non-linear Vibration Isolators Under Harmonic Excitation , 1994 .

[58]  Wenlong Shangguan,et al.  Modeling of a quasi-zero static stiffness mount fabricated with TPU materials using fractional derivative model , 2022, Mechanical Systems and Signal Processing.

[59]  X. Hua,et al.  Geometrically nonlinearity analysis and performance evaluation of tuned inerter dampers for multidirectional seismic isolation , 2022, Mechanical Systems and Signal Processing.

[60]  Gaëtan Kerschen,et al.  Uncovering detached resonance curves in single-degree-of-freedom systems , 2017 .

[61]  Daolin Xu,et al.  Force transmissibility of a two-stage vibration isolation system with quasi-zero stiffness , 2017 .

[62]  Michael C. Constantinou,et al.  Negative stiffness device for seismic protection of structures: An analytical and experimental study , 2011 .

[63]  T. D. Burton,et al.  On the multi-scale analysis of strongly non-linear forced oscillators , 1986 .