TPMS—a system for sequencing operations in process planning

[1]  Tomás Lozano-Pérez,et al.  Task-level planning of pick-and-place robot motions , 1989, Computer.

[2]  B. Raucent,et al.  Performances of wire harness assembly systems , 1994, Proceedings of 1994 IEEE International Symposium on Industrial Electronics (ISIE'94).

[3]  Andrew Kusiak,et al.  Intelligent Manufacturing Systems , 1990 .

[4]  Damian M. Lyons,et al.  Assembly and task planning: a taxonomy , 1994, IEEE Robotics & Automation Magazine.

[5]  Arthur C. Sanderson,et al.  Task sequence planning for robotic assembly , 1989 .

[6]  Randall H. Wilson,et al.  On geometric assembly planning , 1992 .

[7]  Avinash C. Kak,et al.  Spar: A Planner that Satisfies Operational and Geometric Goals in Uncertain Environments , 1990, AI Mag..

[8]  Carlos Ramos,et al.  Generating and converting plans for intelligent manufacturing systems , 1994, Proceedings of 1994 IEEE International Symposium on Industrial Electronics (ISIE'94).

[9]  João Rocha,et al.  Task planning for flexible and agile manufacturing systems , 1994, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'94).

[10]  Eugénio C. Oliveira,et al.  Closing The Loop Of Task Planning, Action And Sensing , 1992, Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems.

[11]  C. S. George Lee,et al.  A framework of knowledge-based assembly planning , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[12]  Sukhan Lee,et al.  Backward assembly planning with assembly cost analysis , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[13]  Thomas L. DeFazio,et al.  Simplified generation of all mechanical assembly sequences , 1987, IEEE Journal on Robotics and Automation.