Combined thin-film and Navier–Stokes analysis in high Reynolds number lubrication
暂无分享,去创建一个
[1] J. Rosant,et al. Pressure Drop in Single-Phase and Two-Phase Couette-Poiseuille Flow , 1992 .
[2] R. H. Buckholz. The Effect of Lubricant Inertia Near the Leading Edge of a Plane Slider Bearing , 1987 .
[3] V. Constantinescu. Laminar viscous flow , 1995 .
[4] John A. Tichy,et al. Application of the k-ε Turbulence Model to the Squeeze Film Damper , 1987 .
[5] Jean Frene,et al. A Bulk-Flow Analysis of Static and Dynamic Characteristics of Eccentric Circumferentially-Grooved Liquid Annular Seals , 2004 .
[6] David C. Wilcox,et al. Comparison of two-equation turbulence models for boundary layers with pressure gradient , 1993 .
[7] C. H. T. Pan. Calculation of Pressure, Shear, and Flow in Lubricating Films for High Speed Bearings , 1974 .
[8] A. J. Reynolds,et al. The Structure of Turbulent Plane Couette Flow , 1982 .
[9] V. Constantinescu. On Turbulent Lubrication , 1959 .
[10] An Expression of Reynolds Stresses in Turbulent Lubrication Theory , 1992 .
[11] Luis San Andrés,et al. Theoretical and Experimental Comparisons for Rotordynamic Coefficients of a High-Speed, High-Pressure, Orifice-Compensated Hybrid Bearing , 1995 .
[12] V. C. Patel,et al. Turbulence models for near-wall and low Reynolds number flows - A review , 1985 .
[13] P. S. Granville. A Modified Van Driest Formula for the Mixing Length of Turbulent Boundary Layers in Pressure Gradients , 1989 .
[14] C. Pan,et al. A Linearized Turbulent Lubrication Theory , 1965 .
[15] G. Taylor. Stability of a Viscous Liquid Contained between Two Rotating Cylinders , 1923 .
[16] J. Frěne,et al. Comparisons Between Algebraic Nonlinear Turbulence Models. Application to Seals Analysis , 1995 .
[17] H. Schlichting. Boundary Layer Theory , 1955 .
[18] P. Spalart. Direct simulation of a turbulent boundary layer up to Rθ = 1410 , 1988, Journal of Fluid Mechanics.
[19] S. Galetuse,et al. Pressure Drop Due to Inertia Forces in Step Bearings , 1976 .
[20] Mein-Kai Ho,et al. Application of Energy Model of Turbulence to Calculation of Lubricant Flows , 1974 .
[21] V. N. Constantinescu. On the Influence of Inertia Forces in Turbulent and Laminar Self-Acting Films , 1970 .
[22] G. G. Hirs. A Systematic Study of Turbulent Film Flow , 1974 .
[23] Luis San Andrés,et al. Turbulent Hybrid Bearings With Fluid Inertia Effects , 1990 .
[24] C. Ng,et al. A Theory for Turbulent Fluid Films and Its Application to Bearings , 1967 .
[25] Jean Frene,et al. Roughness Influence on Turbulent Flow Through Annular Seals , 1994 .
[26] M. Arghir,et al. Pressure Drop In A Hydrostatic Pocket. Experimental and Theoretical Results , 1996 .
[27] Nicolae Tipei,et al. Flow and Pressure Head at the Inlet of Narrow Passages, Without Upstream Free Surface , 1982 .
[28] Dara W. Childs,et al. An Extended Three-Control-Volume Theory for Circumferentially-Grooved Liquid Seals , 1996 .
[29] Jean Frene,et al. Numerical Three-Dimensional Pressure Patterns in a Recess of a Turbulent and Compressible Hybrid Journal Bearing , 2003 .
[30] S. Galetuse,et al. On the Possibilities of Improving the Accuracy of the Evaluation of Inertia Forces in Laminar and Turbulent Films , 1974 .
[31] W. Jones,et al. The calculation of low-Reynolds-number phenomena with a two-equation model of turbulence , 1973 .