Improved inductive-system-level IEC ESD performance for automotive applications using mutual ballasted ESD protection technique

Abstract A new ESD failure mode under inductive IEC stress of automotive Controller Area Network (CAN) bus is identified. Inductor saturation causes increase of the rise-time from 1 ns to ~ 20 ns, leading to non-uniform conduction in the bidirectional ESD protection circuit. A novel mutual ballasting layout technique is introduced to recover the system level ESD performance.

[1]  R. Gartner,et al.  Cable discharges into communication interfaces , 2006, 2006 Electrical Overstress/Electrostatic Discharge Symposium.

[2]  Patrice Besse,et al.  Correlation between system level and TLP tests applied to stand-alone ESD protections and commercial products , 2010, Electrical Overstress/Electrostatic Discharge Symposium Proceedings 2010.

[3]  Gianluca Boselli,et al.  The relevance of long-duration TLP stress on system level ESD design , 2010, Electrical Overstress/Electrostatic Discharge Symposium Proceedings 2010.

[4]  E. Rosenbaum,et al.  A flexible simulation model for system level ESD stresses with application to ESD design and troubleshooting , 2012, Electrical Overstress / Electrostatic Discharge Symposium Proceedings 2012.

[5]  Taylor R. Efland,et al.  SCR-LDMOS. A novel LDMOS device with ESD robustness , 2000, 12th International Symposium on Power Semiconductor Devices & ICs. Proceedings (Cat. No.00CH37094).