Waste-free Soft Reactive Grinding Synthesis of High-Surface-Area Copper–Manganese Spinel Oxide Catalysts Highly Effective for Methanol Steam Reforming

[1]  J. Papavasiliou,et al.  Combined steam reforming of methanol over Cu–Mn spinel oxide catalysts , 2007 .

[2]  Luwei Chen,et al.  Preparation and characterization of coral-like nanostructured α-Mn2O3 catalyst for catalytic combustion of methane , 2007 .

[3]  Kangnian Fan,et al.  Production of hydrogen by steam reforming of methanol over Cu/ZnO catalysts prepared via a practical soft reactive grinding route based on dry oxalate-precursor synthesis , 2007 .

[4]  Luwei Chen,et al.  Observation of the Reversible Phase-Transformation of α-Mn2O3 Nanocrystals during the Catalytic Combustion of Methane by in Situ Raman Spectroscopy , 2007 .

[5]  Luwei Chen,et al.  Controlled synthesis, characterization, and catalytic properties of Mn(2)O(3) and Mn(3)O(4) nanoparticles supported on mesoporous silica SBA-15. , 2006, The journal of physical chemistry. B.

[6]  L. Cadús,et al.  Total oxidation of ethanol and propane over Mn-Cu mixed oxide catalysts , 2006 .

[7]  J. Papavasiliou,et al.  In situ combustion synthesis of structured Cu-Ce-O and Cu-Mn-O catalysts for the production and purification of hydrogen , 2006 .

[8]  W. Maier,et al.  Structural and catalytic aspects of sol–gel derived copper manganese oxides as low-temperature CO oxidation catalyst , 2006 .

[9]  Min Kang,et al.  Cu–Mn mixed oxides for low temperature NO reduction with NH3 , 2006 .

[10]  Kangnian Fan,et al.  Effect of preparation method on the hydrogen production from methanol steam reforming over binary Cu/ZrO2 catalysts , 2006 .

[11]  C. Chen,et al.  Liquid-phase oxidation of toluene by molecular oxygen over copper manganese oxides , 2006 .

[12]  Kangnian Fan,et al.  A highly efficient Cu/ZnO/Al2O3 catalyst via gel-coprecipitation of oxalate precursors for low-temperature steam reforming of methanol , 2005 .

[13]  J. Papavasiliou,et al.  Steam reforming of methanol over copper-manganese spinel oxide catalysts , 2005 .

[14]  Wei Zhang,et al.  Oxidation of p‐Cresol to p‐Hydroxybenzaldehyde with Molecular Oxygen in the Presence of CuMn‐Oxide Heterogeneous Catalyst , 2004 .

[15]  A. Hagen,et al.  Modification of acid supports by solid-state redox reaction: Part I. Preparation and characterization , 2004 .

[16]  G. Hutchings,et al.  Characterisation of copper-manganese oxide catalysts: Effect of precipitate ageing upon the structure and morphology of precursors and catalysts , 2003 .

[17]  J. Fierro,et al.  Production of hydrogen from methanol over binary Cu/ZnO catalysts - Part II. Catalytic activity and reaction pathways , 2003 .

[18]  Guanyu Yang,et al.  Copper and manganese: two concordant partners in the catalytic oxidation of p-cresol to p-hydroxybenzaldehyde. , 2003, Chemical communications.

[19]  Yohei Tanaka,et al.  Water gas shift reaction for the reformed fuels over Cu/MnO catalysts prepared via spinel-type oxide , 2003 .

[20]  W. Ning,et al.  Study of the effect of preparation method on CuO-ZnO-Al2O3 catalyst , 2001 .

[21]  J. Fierro,et al.  Oxidative Methanol Reforming Reactions on CuZnAl Catalysts Derived from Hydrotalcite-like Precursors , 2001 .

[22]  S. Kaliaguine,et al.  Perovskite-type oxides synthesized by reactive grinding: Part I. Preparation and characterization , 2001 .

[23]  M. Salou,et al.  Effect of aluminium source and content on the synthesis of zeolite ZSM-5 from kanemite via solid-state transformation , 2001 .

[24]  Kenzi Suzuki,et al.  Oxidative Steam Reforming of Methanol over CuZnAl(Zr)-Oxide Catalysts for the Selective Production of Hydrogen for Fuel Cells: Catalyst Characterization and Performance Evaluation , 2000 .

[25]  V. Boldyrev,et al.  Mechanochemistry of Solids: Past, Present, and Prospects , 2000 .

[26]  L. Kiwi-Minsker,et al.  Formation of Active Sites for Selective Toluene Oxidation during Catalyst Synthesis via Solid-State Reaction of V2O5 with TiO2 , 2000 .

[27]  D. Panayotov,et al.  Coprecipitated CuO–MnOx Catalysts for Low-Temperature CO–NO and CO–NO–O2 Reactions , 1999 .

[28]  M. J. Watson,et al.  The detailed kinetics of the desorption of hydrogen from polycrystalline copper catalysts , 1999 .

[29]  F. Mizukami,et al.  Influence of solid-state transformation time on the nucleation and growth of silicalite 1 prepared from layered silicate , 1998 .

[30]  Stuart H. Taylor,et al.  Effect of preparation conditions on the catalytic performance of copper manganese oxide catalysts for CO oxidation , 1998 .

[31]  G. Kramer,et al.  Methanol synthesis over Cu/ZnO catalysts prepared by ball milling , 1997 .

[32]  J. Llorca,et al.  Nanophase Fluorite-Structured CeO2–ZrO2Catalysts Prepared by High-Energy Mechanical Milling☆ , 1997 .

[33]  J. A. Schwarz,et al.  Methods for Preparation of Catalytic Materials , 1995 .

[34]  T. Ishikawa.  Thermally stabilized transitional alumina prepared by fume pyrolysis of boehmite sols , 1992 .

[35]  A. Clearfield,et al.  Reactivity of copper manganese oxides , 1988 .