Investigation of Tool Errors and Their Influences on Tooth Surface Topography for Face-Hobbed Hypoid Gears
暂无分享,去创建一个
Yawen Wang | Chengcheng Liang | Chaosheng Song | Caichao Zhu | Siyuan Liu | Ruihua Sun | Yawen Wang | Cai-chao Zhu | Chaosheng Song | Chengcheng Liang | Siyuan Liu | Ruihua Sun
[1] Milan Kljajin,et al. Machining of Spur Gears Using a Special Milling Cutter , 2018, Tehnicki vjesnik - Technical Gazette.
[2] Han Ding,et al. Optimal modification of tooth flank form error considering measurement and compensation of cutter geometric errors for spiral bevel and hypoid gears , 2017 .
[3] Ignacio Gonzalez-Perez,et al. Numerical approach for determination of rough-cutting machine-tool settings for fixed-setting face-milled spiral bevel gears , 2017 .
[4] A. Seireg,et al. Theory of Gearing , 1992 .
[5] Gan Hua Liu,et al. Optimization of Cutting/Tool Parameters for Dry High-Speed Spiral Bevel and Hypoid Gear Cutting with Cutting Simulation Experiment , 2012 .
[6] Muhammad Wasif,et al. Determination of cutter-head geometry for the face-milling of hypoid gears , 2016 .
[7] Cai-chao Zhu,et al. Investigation on the influence of work holding equipment errors on contact characteristics of face-hobbed hypoid gear , 2019, Mechanism and Machine Theory.
[8] Yi-Pei Shih,et al. Mathematical Model for a Universal Face Hobbing Hypoid Gear Generator , 2007 .
[9] Qi Fan,et al. Enhanced Algorithms of Contact Simulation for Hypoid Gear Drives Produced by Face-Milling and Face-Hobbing Processes , 2007 .
[10] M. Vimercati,et al. Mathematical model for tooth surfaces representation of face-hobbed hypoid gears and its application to contact analysis and stress calculation , 2007 .
[11] Zhang-Hua Fong,et al. Mathematical Model of Universal Hypoid Generator With Supplemental Kinematic Flank Correction Motions , 2000 .
[12] Yi Zhang,et al. Local Synthesis and Tooth Contact Analysis of Face-Milled Spiral Bevel Gears , 1991 .
[13] Mohsen Habibi,et al. A New Approach to Blade Design With Constant Rake and Relief Angles for Face-Hobbing of Bevel Gears , 2016 .
[14] Qi Fan. Computerized Modeling and Simulation of Spiral Bevel and Hypoid Gears Manufactured by Gleason Face Hobbing Process , 2006 .