Analysis for a solar stripper design for carbon capture under transient conditions

[1]  Mehdi Aghaei Meybodi,et al.  Tailored solar field and solvent storage for direct solvent regeneration: A novel approach to solarise carbon capture technology , 2020 .

[2]  Hai Yu,et al.  Process enhancement in aqueous ammonia PCC using a direct contact condenser , 2019, Greenhouse Gases: Science and Technology.

[3]  Ali Abbas,et al.  A novel process for direct solvent regeneration via solar thermal energy for carbon capture , 2017 .

[4]  K. Sudhakar,et al.  Modeling and performance simulation of 100 MW LFR based solar thermal power plant in Udaipur India , 2017, Resource-Efficient Technologies.

[5]  Forough Parvareh,et al.  Solar Repowering of PCC-retrofitted Power Plants , 2015 .

[6]  Ali Abbas,et al.  Highly integrated post‐combustion carbon capture process in a coal‐fired power plant with solar repowering , 2015 .

[7]  E. Rubin,et al.  The cost of CO2 capture and storage , 2015 .

[8]  Ali Abbas,et al.  Solar repowering of PCC-retrofitted power plants; solar thermal plant dynamic modelling and control strategies , 2015 .

[9]  Ali Abbas,et al.  Integration of solar energy in coal-fired power plants retrofitted with carbon capture: A review , 2014 .

[10]  Kazuya Goto,et al.  A review of efficiency penalty in a coal-fired power plant with post-combustion CO2 capture , 2013 .

[11]  Ali Abbas,et al.  Potential for solar-assisted post-combustion carbon capture in Australia , 2013 .

[12]  Hongguang Jin,et al.  Integrating mid-temperature solar heat and post-combustion CO2-capture in a coal-fired power plant , 2012 .

[13]  Andrew Forbes Alexander Hoadley,et al.  Optimisation of power stations with carbon capture plants – the trade-off between costs and net power , 2012 .

[14]  Hailong Li,et al.  Feasibility of integrating solar energy into a power plant with amine-based chemical absorption for CO2 capture , 2012 .

[15]  Ya-Ling He,et al.  Numerical simulation of a parabolic trough solar collector with nonuniform solar flux conditions by coupling FVM and MCRT method , 2012 .

[16]  Nilay Shah,et al.  Solar-assisted Post-combustion Carbon Capture feasibility study , 2012 .

[17]  J. Muñoz,et al.  Analysis of internal helically finned tubes for parabolic trough design by CFD tools , 2011 .

[18]  J. Copetti,et al.  Flow boiling heat transfer and pressure drop of R-134a in a mini tube: an experimental investigation , 2011 .

[19]  Ali Abbas,et al.  HEN optimization for efficient retrofitting of coal-fired power plants with post-combustion carbon capture , 2011 .

[20]  Andrew Forbes Alexander Hoadley,et al.  Reducing the energy penalty of CO2 capture and compression using pinch analysis , 2010 .

[21]  Kiyoshi Saito,et al.  Pressure drop and heat transfer during two-phase flow vaporization of propane in horizontal smooth minichannels , 2009 .

[22]  J. Thome.  Boiling in microchannels: a review of experiment and theory , 2004 .

[23]  D. Rao,et al.  Experimental studies on flow boiling in inclined tubes: In the regions encountered in solar collectors , 1995 .

[24]  J. C. Chen.  Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow , 1966 .

[25]  Abengoa Solar Llc.  ADVANCED ENERGY DELIVERY FOR FOOD PROCESSING: DIRECT STEAM GENERATION IN PARABOLIC TROUGH SOLAR COLLECTORS , 2014 .

[26]  Jon Gibbins,et al.  Steam cycle options for the retrofit of coal and gas power plants with postcombustion capture , 2011 .

[27]  S. Kakaç,et al.  Two-phase flow instabilities in a horizontal single boiling channel , 1991 .

[28]  J. Thome,et al.  Convective Boiling and Condensation , 1972 .