Injection of a self-consistent beam with linear space charge force into a ring

One major concern in the design and operation of high-intensity rings is beam loss due to beam halo. Another issue of importance in applications involving fixed targets is the uniformity of the beam energy deposition on the target. Both of these issues could be favorably addressed by a hard-edged beam with uniform transverse density. This paper presents a detailed feasibility study for painting such a beam into a high-intensity proton ring. For the purposes of this paper, we define self-consistent beams to be ellipsoidal, or elliptical in 2D, distributions that have uniform density and linear space charge force and that retain these properties under all linear transformations. Because of their linear space charge forces and linear transport properties, self-consistent distributions may undergo very little halo formation if realized in practice. Because of their uniform density, they would have smaller maximum space charge tune shifts than peaked density distributions, and they would be attractive for high-intensity fixed target applications. Selfconsistent distributions involve very special relationships between the phase space coordinates, making them singular in some respects and difficult to realize experimentally. The most famous self-consistent distribution is the Kapchinsky-Vladimirsky distribution, but now many other self-consistent distributions have been discovered. One such, the 2D rotating distribution, can be painted as a coasting beam into a ring having an appropriately designed and tuned lattice. For bunched beams, if the bunch length is sufficiently long, it is expected that the coasting beam assumption will be a good approximation during painting. However, it is unknown how robust self-consistent distributions will be under real world transport in the presence of nonlinearities and collective effects. This paper studies these issues for a particular case of interest by applying realistic detailed computational models to the simulation of painting a self-consistent rotating beam into the Spallation Neutron Source (SNS) ring. As a result, we propose a case that can be carried out with only a minor modification of the SNS hardware.

[1]  B. Holzer,et al.  Beam Dynamics , 2020, Particle Physics Reference Library.

[2]  M. Aiba,et al.  Four-dimensional transverse beam matrix measurement using the multiple-quadrupole scan technique , 2014 .

[3]  W. Blokland,et al.  A NON-DESTRUCTIVE PROFILE MONITOR FOR HIGH INTENSITY BEAMS , 2011 .

[4]  J. Rosenzweig,et al.  Experimental generation and characterization of uniformly filled ellipsoidal electron-beam distributions. , 2008, Physical review letters.

[5]  Jian-Guang Wang.  Particle optics of quadrupole doublet magnets in Spallation Neutron Source accumulator ring , 2006 .

[6]  V. V. Danilov,et al.  RF BARRIER CAVITY OPTION FOR THE SNS RING BEAM POWER UPGRADE , 2006 .

[7]  V. Danilov,et al.  Painting Self-Consistent Beam Distributions in Rings , 2005, Proceedings of the 2005 Particle Accelerator Conference.

[8]  V. Danilov,et al.  Feasibility Study of Using an Electron Beam for Profile Measurements in the SNS Accumulator Ring , 2005, Proceedings of the 2005 Particle Accelerator Conference.

[9]  O. J. Luiten,et al.  How to realize uniform three-dimensional ellipsoidal electron bunches. , 2004, Physical review letters.

[10]  V. Danilov,et al.  INJECTION SCHEMES FOR SELF-CONSISTENT SPACE CHARGE DISTRIBUTIONS , 2004 .

[11]  V. Danilov,et al.  Self-consistent time dependent two dimensional and three dimensional space charge distributions with linear force , 2003 .

[12]  A. Fedotov,et al.  Resonant beam behavior studies in the Proton Storage Ring , 2003 .

[13]  V. Danilov,et al.  Space charge induced resonance excitation in high intensity rings , 2003 .

[14]  S. Tzenov,et al.  Kinetic Description of Intense Beam Propagation Through a Periodic Focusing Field for Uniform Phase-Space Density , 2002 .

[15]  J. Galambos,et al.  Comparison of simulated and observed beam profile broadening in the Proton Storage Ring and the role of space charge , 2000 .

[16]  R. Ryne,et al.  Longitudinal halo in beam bunches with self-consistent 6-D distributions , 1998 .

[17]  V. Danilov,et al.  Two examples of integrable systems with round colliding beams , 1997, Proceedings of the 1997 Particle Accelerator Conference (Cat. No.97CH36167).

[18]  Batygin.  Adiabatic matching of a nonuniform intense charged-particle beam into the focusing channel. , 1996, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[19]  Martin Reiser,et al.  Theory and Design of Charged Particle Beams , 1994 .

[20]  P. Emma,et al.  Sigma matrix reconstruction in the SLC final focus , 1993, Proceedings of International Conference on Particle Accelerators.

[21]  L. Laslett,et al.  STABILITY OF THE KAPCHINSKIJ-VLADIMIRSKIJ (K-V) DISTRIBUTION IN LONG PERIODIC TRANSPORT SYSTEMS , 1983 .

[22]  F. Sacherer.  Transverse Space-Charge Effects in Circular Accelerators , 1968 .