Mixed electron and proton conductivity of polyaniline films in aqueous solutions of acids: beyond the 1000 S cm−1 limit

BACKGROUND: The application potential of conducting polymers depends on their conductivity. It is generally assumed that the conductivity determined in the dry state is a parameter that unambiguously characterizes them. RESULTS: The conductivity of polyaniline (PANI) films immersed in aqueous solutions of sulfuric acid may be more than 1000 times higher compared with that obtained by measurement of dry films in air, and is estimated to reach a value exceeding 3300 S cm−1 in 1 mol L−1 sulfuric acid. This is explained by the reduction of conductivity barriers between conducting PANI islands. CONCLUSION: The organized polymer chains in the conducting islands of a PANI film are separated by disordered regions of low conductivity in the dry state. The penetration of sulfuric acid solution into the disordered areas increases the overall conductivity of the PANI film by improving the electrical contact between the islands through ionic charge transport. The electronic conductivity of the PANI film in the dry state thus converts to mixed electron–proton conduction in acidic aqueous solutions, electron conductivity being dominant in ordered regions and ionic conductivity in disordered regions separating them. Weakly bound protons are the most important ionic charge carriers hopping along the PANI chains. Copyright © 2009 Society of Chemical Industry

[1]  Zheng Wang,et al.  Redox reactions without direct contact of the reactants. Electron and ion coupled transport through polyaniline membrane. , 2005, The journal of physical chemistry. A.

[2]  J. Stejskal,et al.  On the origin of colloidal particles in the dispersion polymerization of aniline. , 2004, Journal of colloid and interface science.

[3]  Yoon-Bo Shim,et al.  Electrochemical Sensors Based on Organic Conjugated Polymers , 2008, Sensors.

[4]  Dewyani Patil,et al.  Humidity sensitive poly(2,5-dimethoxyaniline)/WO3 composites , 2008 .

[5]  L. Yu,et al.  Electrochemical chains using protolytic organic semiconductors , 1968 .

[6]  Jaroslav Stejskal,et al.  Control of polyaniline conductivity and contact angles by partial protonation , 2008 .

[7]  G. Inzelt,et al.  Electron and proton conducting polymers: Recent developments and prospects , 2000 .

[8]  C. Hsu,et al.  Charge Transport of Hydrochloric Acid Doped Polyaniline and Poly(o-toluidine) Fibers: Role of Processing , 1994 .

[9]  S. Paddison,et al.  Transport in proton conductors for fuel-cell applications: simulations, elementary reactions, and phenomenology. , 2004, Chemical reviews.

[10]  C. Deslouis,et al.  Electrochemical and anticorrosion performances of zinc-rich and polyaniline powder coatings , 2008 .

[11]  P. Rannou,et al.  Is granularity the determining feature for electron transport in conducting polymers , 1999 .

[12]  A. Epstein,et al.  Conduction mechanism of polyaniline: Effect of moisture , 1988 .

[13]  J. Janata,et al.  Acid Doping of Polyaniline: Spectroscopic and Electrochemical Studies , 1999 .

[14]  A. Kalendová,et al.  Organic coatings containing polyaniline and inorganic pigments as corrosion inhibitors , 2008 .

[15]  R. D. Calleja,et al.  Equivalent circuit analysis of the electrical properties of conducting polymers: electrical relaxation mechanisms in polyaniline under dry and wet conditions , 1998 .

[16]  D. Hui,et al.  Electron spin resonance and DC electrical investigations on chlorine doped polyanilines , 2004 .

[17]  Jaroslav Stejskal,et al.  Polymerization of aniline on polyaniline membranes. , 2007, The journal of physical chemistry. B.

[18]  A. Epstein,et al.  Evolution of the conducting state of polyaniline from localized to mesoscopic metallic to intrinsic metallic regimes , 1995 .

[19]  J. Fergus,et al.  Impedance spectroscopy of thin films of emeraldine base polyaniline and its implications for chemical sensing , 2006 .

[20]  J. Stejskal,et al.  In-situ polymerized polyaniline films: 3. Film formation , 2001 .

[21]  Masayoshi Watanabe,et al.  Macromolecules in Ionic Liquids: Progress, Challenges, and Opportunities , 2008 .

[22]  J. Tomkinson,et al.  Novel forms of hydrogen in solids: the `ionic' proton and the `quasi-free' proton , 1997 .

[23]  N. Pinto,et al.  Dependence of the conducting state of polyaniline films on moisture , 1996 .

[24]  Zhen-ya Li,et al.  Study of charge transport in highly conducting polymers based on a random resistor network , 2004 .

[25]  Vladimir N. Prigodin,et al.  Nature of insulator–metal transition and novel mechanism of charge transport in the metallic state of highly doped electronic polymers , 2001 .

[26]  Catalytic layers for fuel cells based on polyaniline and α-C〈Pt〉 composite obtained by magnetron sputtering , 2007 .

[27]  D. Hui,et al.  IMPEDANCE SPECTROSCOPY STUDIES ON DOPED POLYANILINES , 2004 .

[28]  B. Grgur,et al.  Polyaniline as possible anode materials for the lead acid batteries , 2008 .

[29]  J. Stejskal,et al.  Oxidation of Aniline: Polyaniline Granules, Nanotubes, and Oligoaniline Microspheres , 2008 .

[30]  P. Colomban,et al.  Study of Polyanilines by High-Resolution Electron Microscopy , 1999 .

[31]  Wang,et al.  Electron localization and charge transport in poly(o-toluidine): A model polyaniline derivative. , 1991, Physical review. B, Condensed matter.

[32]  C. Alemán,et al.  Corrosion protection with polyaniline and polypyrrole as anticorrosive additives for epoxy paint , 2008 .

[33]  P. Colomban,et al.  Vibrational study of short-range order and structure of polyaniline bases and salts , 1999 .

[34]  J. Stejskal,et al.  Ion-selective electrodes: Polyaniline modification and anion recognition , 2005 .

[35]  G. Spinks,et al.  Tunneling spectroscopy and spectroscopic imaging of granular metallicity of polyaniline , 1999 .

[36]  A. Dicks,et al.  Nafion/polyaniline/silica composite membranes for direct methanol fuel cell application , 2007 .

[37]  Jaroslav Stejskal,et al.  Polyaniline: Thin films and colloidal dispersions (IUPAC Technical Report) , 2005 .

[38]  K. Kreuer.  Proton Conductivity: Materials and Applications , 1996 .

[39]  P. Passiniemi.  Simple method for determining water diffusion coefficient in conducting polymers , 1995 .

[40]  J. Stejskal,et al.  In-situ polymerized polyaniline films. 5. Brush-like chain ordering , 2002 .

[41]  P. Rannou,et al.  MODEL FOR AGING IN HCL-PROTONATED POLYANILINE : STRUCTURE, CONDUCTIVITY, AND COMPOSITION STUDIES , 1998 .

[42]  G. Wallace,et al.  Conducting polymers for neural interfaces: challenges in developing an effective long-term implant. , 2008, Biomaterials.

[43]  B. Hennion,et al.  Nature of Protons, Phase Transitions, and Dynamic Disorder in Poly- and Oligoaniline Bases and Salts: An Inelastic Neutron Scattering Study , 2002 .

[44]  Pelster,et al.  Fully protonated polyaniline: Hopping transport on a mesoscopic scale. , 1994, Physical review. B, Condensed matter.

[45]  Anjan Ray,et al.  Polyaniline: Processability from aqueous solutions and effect of water vapor on conductivity , 1987 .

[46]  A. Varela-Álvarez,et al.  A suitable model for emeraldine salt. , 2008, The Journal of chemical physics.

[47]  Jaroslav Stejskal,et al.  The mechanism of the oxidative polymerization of aniline and the formation of supramolecular polyaniline structures , 2008 .

[48]  J. Stejskal,et al.  Thermal degradation of polyaniline films prepared in solutions of strong and weak acids and in water – FTIR and Raman spectroscopic studies , 2008 .

[49]  Gary E. Wnek,et al.  Influence of oxidation state, pH, and counterion on the conductivity of polyaniline , 1987 .

[50]  Ping Sheng,et al.  Fluctuation-induced tunneling conduction in disordered materials , 1980 .

[51]  Potassium-selective electrodes with stable and geometrically well-defined internal solid contact based on nanoparticles of polyaniline and plasticized poly(vinyl chloride). , 2007, Analytical chemistry.

[52]  P. Kahol,et al.  An electron-spin-resonance study of polyaniline and its derivatives: polymer interactions with moisture , 1997 .

[53]  J. Janata,et al.  Comparison of Chemically and Electrochemically Prepared Polyaniline Films. 2. Optical Properties , 1995 .

[54]  K. Aoki,et al.  Electrically conducting suspensions formed by polyaniline , 2008 .

[55]  T. Taka.  Humidity dependency of electrical conductivity of doped polyaniline , 1993 .

[56]  A. Epstein,et al.  Electron-ion interaction in doped conducting polymers , 2008 .

[57]  H. Cachet,et al.  ac-Electrogravimetry study of ionic and solvent motion in polypyrrole films doped with an heteropolyanion, SiMo12O404− , 2008 .

[58]  P. S. Antonel,et al.  Fluorescence of polyaniline films on platinum surfaces. Influence of redox state and conductive domains , 2007 .

[59]  Matthew J. Panzer,et al.  Exploiting Ionic Coupling in Electronic Devices: Electrolyte‐Gated Organic Field‐Effect Transistors , 2008 .

[60]  Osvaldo N. Oliveira,et al.  TEM, XRD and AFM study of poly(o-ethoxyaniline) films: new evidence for the formation of conducting islands , 2008 .

[61]  J. Stejskal,et al.  Nanocomposites with mixed electronic and protonic conduction for electrocatalysis , 2007 .

[62]  Arthur J. Epstein,et al.  Electromagnetic radiation shielding by intrinsically conducting polymers , 1994 .

[63]  J. Travers,et al.  Effect of aging induced disorder on transport properties of PANI-CSA , 1997 .

[64]  E. S. Matveeva,et al.  Residual water as a factor influencing the electrical properties of polyaniline. The role of hydrogen bonding of the polymer with solvent molecules in the formation of a conductive polymeric network , 1996 .

[65]  Keith Scott,et al.  The morphology control of polyaniline as conducting polymer in fuel cell technology , 2006 .