Tribology of rail transport

[1]  W. R. Tyfour,et al.  Deterioration of rolling contact fatigue life of pearlitic rail steel due to dry-wet rolling-sliding line contact , 1996 .

[2]  E. G. Vadillo,et al.  Effect of sleeper distance on rail corrugation , 1998 .

[3]  W. R. Tyfour,et al.  The effect of rolling direction reversal on fatigue crack morphology and propagation , 1994 .

[4]  J Kalousek,et al.  Rail Corrugation: Characteristics, Causes and Treatments , 1993 .

[5]  Hamouda Ghonem,et al.  Study of surface crack initiation due to biaxial compression/shear loading , 1988 .

[6]  J. J. Kalker.  CONSIDERATIONS ON RAIL CORRUGATION. , 1994 .

[7]  A. Bower.  The influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks , 1988 .

[8]  A. Kapoor.  A re-evaluation of the life to rupture of ductile metals by cyclic plastic strain , 1994 .

[9]  K. Johnson,et al.  Shear behaviour of elastohydrodynamic oil films at high rolling contact pressures , 1967 .

[10]  John H. Beynon,et al.  A simple method of stress intensity factor calculation for inclined surface-breaking cracks with crack face friction under contact loading , 1999 .

[11]  W. R. Tyfour,et al.  The steady state wear behaviour of pearlitic rail steel under dry rolling-sliding contact conditions , 1995 .

[12]  J. Greenwood,et al.  Contact of nominally flat surfaces , 1966, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[13]  Ajay Kapoor,et al.  The Effect of Interfacial Shear Strength on the Performance of Coated Surfaces in Repeated Sliding , 1997 .

[14]  P. Clayton,et al.  Tribological aspects of wheel-rail contact: a review of recent experimental research , 1996 .

[15]  John H. Beynon,et al.  The effect of rolling direction reversal on the wear rate and wear mechanism of pearlitic rail steel , 1994 .

[16]  P. Clayton,et al.  Rolling/sliding wear behavior of a chromium-molybdenum rail steel in pearlitic and bainitic conditions , 1992 .

[17]  K. Johnson,et al.  Mode II stress intensity factors for a crack parallel to the surface of an elastic half-space subjected to a moving point load , 1985 .

[18]  A. Kapoor.  Wear by plastic ratchetting , 1997 .

[19]  J. J. Kalker,et al.  SURVEY OF WHEEL-RAIL ROLLING CONTACT THEORY , 1979 .

[20]  John H. Beynon,et al.  Development of a machine for closely controlled rolling contact fatigue and wear testing , 2000 .

[21]  A. Kapoor,et al.  Effect of hard and stiff overlay coatings on the strength of surfaces in repeated sliding , 1996 .

[22]  G. Poll,et al.  The influence of the real material and system properties on the traction-creep relationships in rolling contact , 1983 .

[23]  T. Uzkan,et al.  On the Concept of Separate Aftercooling for Locomotive Diesel Engines , 1999 .

[24]  M. A. Tanvir,et al.  Temperature rise due to slip between wheel and rail—an analytical solution for hertzian contact , 1980 .

[25]  A. H. Wickens,et al.  The dynamics of railway vehicles—from Stephenson to Carter , 1998 .

[26]  J. Kalousek,et al.  Tribological interrelationship of seasonal fluctuations of freight car wheel wear, contact fatigue shelling and composition brakeshoe consumption , 1996 .

[27]  M. D. Bryant,et al.  A Pitting Model for Rolling Contact Fatigue , 1983 .

[28]  H. Chen,et al.  Numerical analysis for the influence of water film on adhesion between rail and wheel , 1998 .

[29]  J. Archard,et al.  Metallurgical phase transformations in the rubbing of steels , 1988, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[30]  J J Kotlin,et al.  NEW MEDIUM SPEED TWO STROKE CYCLE DIESEL ENGINE--THE GENERAL MOTORS EMD 645EB SERIES , 1980 .

[31]  Yukitaka Murakami,et al.  Three-dimensional fracture mechanics analysis of pit formation mechanism under lubricated rolling-sliding contact loading , 1994 .

[32]  Ajay Kapoor,et al.  Shakedown limits in sliding contacts on a surface-hardened half-space , 1994 .

[33]  K. Johnson,et al.  Regimes of Elastohydrodynamic Lubrication , 1970 .

[34]  T. Ohyama.  Tribological studies on adhesion phenomena between wheel and rail at high speeds , 1991 .

[35]  Shin-ichi Nishida,et al.  Study on Contact Rolling Fatigue of Rails : 2nd Report, Analysis by High Speed Rail Testing Machine , 1985 .

[36]  C. A. Russell.  The developing relations between science, technology and the railways , 1998 .

[37]  K. Johnson,et al.  The steady state sliding of rough surfaces , 1994 .

[38]  G. Langford.  Deformation of pearlite , 1977 .

[39]  John H. Beynon,et al.  A simple method of stress intensity factor calculation for inclined fluid-filled surface-breaking cracks under contact loading , 1999 .

[40]  Klaus Knothe,et al.  Determination of temperatures for sliding contact with applications for wheel-rail systems , 1995 .

[41]  Shakedown of 2-dimensional asperities in sliding contact , 1992 .

[42]  P. Bolton,et al.  Rolling—sliding wear damage in rail and tyre steels , 1984 .

[43]  Ajay Kapoor,et al.  Shakedown limits in rolling-sliding point contacts on an anisotropic halfspace , 1996 .