论文信息 - Synchronous ethernet to transport frequency and phase/time

Synchronous ethernet to transport frequency and phase/time

This article describes how Synchronous Ethernet technology provides a solution for transporting synchronization over Ethernet. Synchronous Ethernet uses syntonization/frequency synchronization from the physical layer together with a slow protocol and has been standardized by the ITUT for frequency distribution. This article also describes how Synchronous Ethernet could be extended in order to transport phase/time in addition to frequency; this is referred to as "Time Synchronous Ethernet" (TSE) in this article.

Sebastien Jobert | Silvana Rodrigues | Kenneth Hann

[1] Michel Ouellette,et al. Synchronous ethernet: a method to transport synchronization , 2008, IEEE Communications Magazine.

[2] Vishal Sharma,et al. Framework for Generalized Multi-Protocol Label Switching (GMPLS)-based Control of Synchronous Digital Hierarchy/Synchronous Optical Networking (SDH/SONET) Networks , 2005, RFC.

[3] Anthony Magee. Synchronization in next-generation mobile backhaul networks , 2010, IEEE Communications Magazine.

[4] Michel Ouellette,et al. Development of the first IEEE 1588 telecom profile to address mobile backhaul needs , 2010, IEEE Communications Magazine.

[5] Kang Lee,et al. IEEE 1588 standard for a precision clock synchronization protocol for networked measurement and control systems , 2002, 2nd ISA/IEEE Sensors for Industry Conference,.

[6] Digital transmission systems – Digital networks – General aspects Architecture of transport networks based on the synchronous digital hierarchy ( SDH ) , 2001 .