An overview of the EU breeding blanket design strategy as an integral part of the DEMO design effort

Abstract This paper provides an overview of the newly revised design and development strategy for the DEMO breeding blanket in Europe. This has been defined to take into account the input from the DEMO pre-conceptual design activities, the findings and recommendations of a thorough technical and programmatic assessment of the breeding blanket and the EU ITER Test Blanket Module (TBM) programs, conducted in 2017 by an independent expert panel. This work has led to the identification of (i) the most mature and technically sound breeding blanket concepts to be used as “driver” and “advanced” breeding blankets in DEMO, the latter to be installed and tested in a limited number of properly designed segments, potentially being more attractive for future fusion power plants; (ii) the remaining technical gaps and R&D priorities. A number of urgent steps that are required to better align and strengthen the EU TBM and DEMO Breeding Blanket Program as a whole and to aim at an efficient implementation of the work are described in this paper. These include a proposal to change the EU TBM options to be tested in ITER in order to obtain important and useful information from the two current breeders (solid and liquid) and coolants (helium and water) considered for DEMO.

[1]  Francisco Hernandez,et al.  A new HCPB breeding blanket for the EU DEMO: evolution, rationale and preliminary performances , 2017 .

[2]  W. Krauss,et al.  Long-term corrosion behavior of Al-based coatings in flowing Pb–15.7Li, produced by electrochemical ECX process , 2018, Nuclear Materials and Energy.

[3]  Angel Ibarra,et al.  DEMO design activity in Europe: Progress and updates , 2018, Fusion Engineering and Design.

[4]  C. Bachmann,et al.  Progress in EU-DEMO in-vessel components integration , 2017 .

[5]  Ralph W. Moir,et al.  Overview of the Blanket Comparison and Selection Study , 1985 .

[6]  David Cooper,et al.  Concept for a vertical maintenance remote handling system for multi module blanket segments in DEMO , 2014 .

[7]  J. Morris,et al.  Overview over DEMO design integration challenges and their impact on component design concepts , 2018, Fusion Engineering and Design.

[8]  G. Federici,et al.  Preliminary design of EU DEMO helium-cooled breeding blanket primary heat transfer system , 2018, Fusion Engineering and Design.

[9]  D. Regidor,et al.  The European approach to the fusion-like neutron source: the IFMIF-DONES project , 2019, Nuclear Fusion.

[10]  M. Gadomska,et al.  Overview of EU DEMO design and R&D activities , 2014 .

[11]  G. Federici,et al.  Progress in EU Breeding Blanket design and integration , 2018, Fusion Engineering and Design.

[12]  Alice Ying,et al.  Blanket/first wall challenges and required R&D on the pathway to DEMO , 2015 .

[13]  A. Ciampichetti,et al.  Design of a multipurpose laboratory scale apparatus for the investigation of hydrogen isotopes in PbLi and permeation technologies , 2012 .

[14]  P. A. Di Maio,et al.  Structural analysis of the back supporting structure of the DEMO WCLL outboard blanket , 2017 .

[15]  P. A. Di Maio,et al.  On the thermo-mechanical behaviour of DEMO water-cooled lithium lead equatorial outboard blanket module , 2017 .

[16]  T. Sketchley,et al.  MHD PbLi experiments in MaPLE loop at UCLA , 2016 .

[17]  Marc Kamlah,et al.  Overview of the HCPB Research Activities in EUROfusion , 2018, IEEE Transactions on Plasma Science.

[18]  L. V. Boccaccini,et al.  Objectives and status of EUROfusion DEMO blanket studies , 2016 .

[19]  H. Tsige-Tamirat,et al.  Neutronics Design Analyses of Fusion Power Reactors Based on a Novel Integral Approach , 2009 .

[20]  Mohamed A. Abdou,et al.  Radiation considerations for superconducting fusion magnets , 1978 .

[21]  Fabio Giannetti,et al.  Advancements in DEMO WCLL breeding blanket design and integration , 2018 .

[22]  Fabio Giannetti,et al.  WCLL breeding blanket design and integration for DEMO 2015: status and perspectives , 2017 .

[23]  A. Tarallo,et al.  Study of EU DEMO WCLL breeding blanket and primary heat transfer system integration , 2018, Fusion Engineering and Design.

[24]  Alessandro Lampasi,et al.  The European DEMO fusion reactor: Design status and challenges from balance of plant point of view , 2017, 2017 IEEE International Conference on Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe).

[25]  Christian Bachmann,et al.  Neutronic analyses of design issues affecting the tritium breeding performance in different DEMO blanket concepts , 2016 .

[26]  Sergio Ciattaglia,et al.  Initial layout of DEMO buildings and configuration of the main plant systems , 2018, Fusion Engineering and Design.

[27]  Alessandro Del Nevo,et al.  Implementation of the chemical PbLi/water reaction in the SIMMER code , 2016 .

[28]  P. F. Morris,et al.  Developing structural, high-heat flux and plasma facing materials for a near-term DEMO fusion power plant: The EU assessment , 2014, 1408.3546.

[29]  Rosaria Villari,et al.  Neutronic performance issues of the breeding blanket options for the European DEMO fusion power plant , 2016 .

[30]  P. Calderoni,et al.  Technologies and modelling issues for tritium processing in the European Test Blanket Systems and perspectives for DEMO , 2014 .

[31]  Fabio Giannetti,et al.  Recent Progress in the WCLL Breeding Blanket Design for the DEMO Fusion Reactor , 2018, IEEE Transactions on Plasma Science.

[32]  Mark R. Gilbert,et al.  Waste assessment of European DEMO fusion reactor designs , 2017, Fusion Engineering and Design.

[33]  M. Coleman,et al.  Issues and strategies for DEMO in-vessel component integration , 2016 .

[34]  C. Köhly,et al.  Reactor integration of the helium cooled pebble bed blanket for DEMO , 2005 .

[35]  P. Sardain,et al.  Power plant conceptual studies in Europe , 2007 .

[36]  L. Giancarli,et al.  Breeding blanket for DEMO , 1993 .

[37]  Yves Poitevin,et al.  The European ITER Test Blanket Modules: EUROFER97 material and TBM’s fabrication technologies development and qualification , 2017 .

[38]  M. Rieth,et al.  Improvement of reduced activation 9%Cr steels by ausforming , 2016 .

[39]  Mikio Enoeda,et al.  Overview of the ITER TBM Program , 2012 .

[40]  W. Hering,et al.  Status of EU DEMO heat transport and power conversion systems , 2018, Fusion Engineering and Design.

[41]  Mark R. Gilbert,et al.  European DEMO design strategy and consequences for materials , 2017 .