Modeling of microstructure evolution in austenitic stainless steels irradiated under light water reactor condition

A model for microstructure development in austenitic alloys under light water reactor irradiation conditions is described. The model is derived from the model developed by Stoller and Odette to describe microstructural evolution under fast neutron or fusion reactor irradiation conditions. The model is benchmarked against microstructure measurements in 304 and 316 SS irradiated in a boiling water reactor core using one material-dependent and three irradiation-based parameters. The model is also adapted for proton irradiation at higher dose rate and higher temperature and is calibrated against microstructure measurements for proton irradiation. The model calculations show that for both neutron and proton irradiations, in-cascade interstitial clustering is the driving mechanism for loop nucleation. The loss of interstitial clusters to sinks by interstitial cluster diffusion was found to be an important factor in determining the loop density. The model also explains how proton irradiation can produce an irradiated dislocation microstructure similar to that in neutron irradiation.

[1]  R. Bullough,et al.  The rate theory of swelling due to void growth in irradiated metals , 1972 .

[2]  N. Yoshida.  Microstructure formation and its role on yield strength in AISI 316 SS irradiated by fission and fusion neutrons , 1990 .

[3]  R. Stoller.  The role of cascade energy and temperature in primary defect formation in iron , 2000 .

[4]  Stanislav I Golubov,et al.  Stability and mobility of defect clusters and dislocation loops in metals , 2000 .

[5]  M. Kiritani,et al.  Analysis of the Clustering Process of Supersaturated Lattice Vacancies , 1973 .

[6]  R. M. Mayer,et al.  Nucleation and growth of voids by radiation. Preface to a series of seven papers , 1980 .

[7]  A. Barbu,et al.  Radiation Effects in Metals and Alloys , 1992 .

[8]  R. Johnson.  Effect of trapping on interstitial cluster nucleation at the onset of irradiation , 1979 .

[9]  S. Golubov,et al.  Kinetic Monte Carlo studies of the effects of Burgers vector changes on the reaction kinetics of one-dimensionally gliding interstitial clusters , 2000 .

[10]  Louis K. Mansur,et al.  Mechanisms of helium interaction with radiation effects in metals and alloys: A review , 1983 .

[11]  J. Katz,et al.  Nucleation of Voids in Materials Supersaturated with Vacancies and Interstitials , 1971 .

[12]  Brian D. Wirth,et al.  Primary damage formation in bcc iron , 1997 .

[13]  L. Mansur.  Void Swelling in Metals and Alloys Under Irradiation: An Assessment of the Theory , 1978 .

[14]  R. Stoller.  Microstructural evolution in fast-neutron-irradiated austenitic stainless steels , 1987 .

[15]  O. Dimitrov,et al.  Defect recovery in irradiated high-purity austenitic Fe-Cr-Ni alloys: Activation energies and dependence on initial defect concentration , 1982 .

[16]  M. R. Hayns,et al.  The nucleation and early growth of interstitial dislocation loops in irradiated materials , 1975 .

[17]  A. Ryazanov,et al.  Swelling modification by one-dimensional diffusion of cascade-produced small interstitial clusters , 1998 .

[18]  G. Was,et al.  Microstructure evolution in austenitic Fe-Cr-Ni alloys irradiated with rotons: comparison with neutron-irradiated microstructures , 2001 .

[19]  A. Brailsford,et al.  Point defect sink strengths and void-swelling , 1976 .