Biokerosene from coconut and palm kernel oils: Production and properties of their blends with fossil kerosene

Abstract Coconut and palm kernel oils have been transesterified with methanol by the classical homogeneous basic catalysis method with good yields. The FAME’s have been subjected to fractional distillation at vacuum, and the low boiling point fractions have been blended with two types of fossil kerosene, a straight-run atmospheric distillation cut (hydrotreated) and a commercial Jet A1. The blends of palm kernel biokerosene and Jet A1 meet some specifications selected for study of the ASTM D1655 standard: smoke point, density, flash point, viscosity at −20 °C and freezing point and they do not comply with the low calorific value by a very narrow margin. On the other hand, the blends of palm kernel biokerosene and atmospheric distillation fossil kerosene only met the density and viscosity at −20 °C parameters. The blends of coconut biokerosene and atmospheric distillation fossil kerosene meet the following specifications: density, viscosity at −20 °C and lubricity. It is especially noticeable that all the blends of 5 vol.% of biokerosene and fossil kerosenes do not meet the low calorific value by a very narrow margin, less than 1.0 MJ kg −1 . With these preliminary results, we can conclude that it would be feasible to blend coconut and palm kernel biokerosenes prepared in this way with commercial Jet A1 up to 10 vol.% of the former, if the IATA organization relaxes very slightly its standards.

[1]  Thomas F.N. Thoruwa,et al.  Indigenous oil crops as a source for production of biodiesel in Kenya , 2009 .

[2]  José Rodríguez-Fernández,et al.  Combustion characteristics and emissions of FischerTropsch diesel fuels in IC engines , 2011 .

[3]  James I. Hileman,et al.  Energy Content and Alternative Jet Fuel Viability , 2010 .

[4]  João A. P. Coutinho,et al.  Evaluation of Predictive Models for the Viscosity of Biodiesel , 2011 .

[5]  M. Lapuerta,et al.  Fatty acid methyl esters (FAMEs) from castor oil: Production process assessment and synergistic effects in its properties , 2010 .

[6]  M. Lapuerta,et al.  Biodiesel from Low-Grade Animal Fat: Production Process Assessment and Biodiesel Properties Characterization , 2008 .

[7]  Yasunori Abe,et al.  Sustainable Bio-Derived Synthetic Paraffinic Kerosene (Bio- SPK) Jet Fuel Flights and Engine Tests Program Results , 2009 .

[8]  Dimitrios M. Korres,et al.  Aviation fuel JP-5 and biodiesel on a diesel engine , 2008 .

[9]  K. Krisnangkura,et al.  An empirical approach in predicting biodiesel viscosity at various temperatures , 2006 .

[10]  R. J. Gill,et al.  Estimation of Soot Thresholds for Fuel Mixtures , 1984 .

[11]  M. P. Dorado,et al.  Multiple response optimization of vegetable oils fatty acid composition to improve biodiesel physical properties. , 2011, Bioresource technology.

[12]  Juan A. Lazzús,et al.  Prediction of Flash Point Temperature of Organic Compounds Using a Hybrid Method of Group Contribution + Neural Network + Particle Swarm Optimization , 2010 .

[13]  Magín Lapuerta,et al.  Improved Method for Determining the Atmospheric Distillation Curve of Biodiesel Fuels from Reduced Pressure , 2011 .

[14]  R. Dunn ALTERNATIVE JET FUELS FROM VEGETABLE OILS , 2001 .

[15]  Haiying Tang,et al.  Fuel properties and precipitate formation at low temperature in soy-, cottonseed-, and poultry fat-based biodiesel blends , 2008 .

[16]  R. Dunn Effects of minor constituents on cold flow properties and performance of biodiesel , 2009 .