An Interdisciplinary Approach to Study the Fouling Phenomenon

Abstract Solid particle ingestion is one of the principal degradation mechanisms in the compressor section of heavy-duty gas turbines. Foulants in the ppm range which are not captured by the air filtration system usually cause deposits on blading,which results in a severe drop in the performance of the compressor.Through the interdisciplinary approach proposed in this paper, it is possible to determine the evolution of the fouling phenomenon through the integration of several studies in different research fields: (i) numerical simulation, (ii) power plant characteristicsand (iii) particle-adhesion characteristics.This paper shows the possibility of linking the numerical results related to the impact/adhesion characteristic of the particles with the actual air contamination data and operating condition of the power units. In fact, the size of the particles, their concentrations and the filtration efficiency represent the major contributors to performing a realistic quantitative analysis of the fouling phenomena in an axial compressor.The integration of these research fields could represent a valuable support for the investigation of the relationship between compressor airfoil design and fouling rate.

[1]  Lars E. Bakken,et al.  Axial Compressor Deterioration Caused by Saltwater Ingestion , 2005 .

[2]  Klaus Brun,et al.  Quantitative Computational Fluid Dynamic Analyses of Particle Deposition on a Transonic Axial Compressor Blade—Part II: Impact Kinematics and Particle Sticking Analysis , 2015 .

[3]  Klaus Brun,et al.  Estimation of the Particle Deposition on a Transonic Axial Compressor Blade , 2016 .

[4]  G. J. Parker,et al.  Studies of the Deposition of Sub-Micron Particles on Turbine Blades: , 1972 .

[5]  Klaus Brun,et al.  Quantitative CFD Analyses of Particle Deposition on a Transonic Axial Compressor Blade: Part I — Particle Zones Impact , 2014 .

[6]  P. R. Spina,et al.  Comparative analyses of micro-particle impact between transonic and subsonic axial compressors , 2015 .

[7]  Makoto Yamamoto,et al.  Numerical simulation of sand erosion phenomena in rotor/stator interaction of compressor , 2008 .

[8]  T. Henning,et al.  Analogous Experiments on the Stickiness of Micron-sized Preplanetary Dust , 2000 .

[9]  Makoto Yamamoto,et al.  Numerical Simulation of Sand Erosion Phenomena in a Single-Stage Axial Compressor , 2011 .

[10]  Klaus Brun,et al.  Quantitative Computational Fluid Dynamics Analyses of Particle Deposition on a Transonic Axial Compressor Blade—Part I: Particle Zones Impact , 2015 .

[11]  P. R. Spina,et al.  Quantitative CFD Analyses of Particle Deposition on a Subsonic Axial Compressor Blade , 2015 .

[12]  Klaus Brun,et al.  Quantitative Computational Fluid Dynamics Analyses of Particle Deposition on a Subsonic Axial Compressor Blade , 2016 .

[13]  Vigueras Zuniga,et al.  Analysis of gas turbine compressor fouling and washing on line , 2007 .

[14]  Simon L. Goren,et al.  Measurements of Kinetic Energy Loss for Particles Impacting Surfaces , 1990 .

[15]  Klaus Brun,et al.  Quantitative CFD Analyses of Particle Deposition on a Transonic Axial Compressor Blade: Part II — Impact Kinematics and Particle Sticking Analysis , 2014 .

[16]  C. Thornton,et al.  A theoretical model for the stick/bounce behaviour of adhesive, elastic-plastic spheres , 1998 .

[17]  K. Kendall,et al.  Surface energy and the contact of elastic solids , 1971, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[18]  Michele Cagna,et al.  Economical Benefits of Highly Efficient Three-Stage Intake Air Filtration for Gas Turbines , 2008 .

[19]  Qingyue Wang,et al.  Size distribution of chemical elements and their source apportionment in ambient coarse, fine, and ultrafine particles in Shanghai urban summer atmosphere. , 2012, Journal of environmental sciences.

[20]  Adel Ghenaiet,et al.  Study of Sand Particle Trajectories and Erosion Into the First Compression Stage of a Turbofan , 2012 .

[21]  Klaus Brun,et al.  Fouling Mechanisms in Axial Compressors , 2012 .