A study of the internal device dynamics of punch-through and nonpunch-through IGBTs under zero-current switching

The effective use of IGBTs requires a good understanding of their internal device physics. This understanding is essential for the optimal interaction between the IGBTs and their snubber elements. As switching frequencies are pushed to higher values, switching loss reduction becomes an essential part of the design and optimization process. Soft switching techniques (ZVS and ZCS) are widely used for this purpose. This study provides insight into the internal dynamic behavior of IGBTs under zero-current switching. This is accomplished through mixed mode simulation, providing the necessary insight for the improvement of circuit and device performance. In particular, we have analyzed the behavior of the negative current in the nonpunch-through device after the first zero-current crossing and the effect of the turn-off delay on the tail current.

[1]  Wolfgang Fichtner,et al.  Punch-through IGBTs with homogeneous n-base operating at 4 kV line voltage , 1995, Proceedings of International Symposium on Power Semiconductor Devices and IC's: ISPSD '95.

[2]  Steven T. Peake,et al.  Power semiconductor devices , 1995 .

[3]  Fred C. Lee,et al.  A comparative study of switching losses of IGBTs under hard-switching, zero-voltage-switching and zero-current-switching , 1994, Proceedings of 1994 Power Electronics Specialist Conference - PESC'94.

[4]  Shinsuke Mori,et al.  New process technologies improve IGBT module efficiency , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[5]  J. Sack,et al.  A new concept for a non punch through IGBT with MOSFET like switching characteristics , 1989, 20th Annual IEEE Power Electronics Specialists Conference.

[6]  Y. Ishimura,et al.  A high performance IGBT with new n+buffer structure , 1995, Proceedings of International Symposium on Power Semiconductor Devices and IC's: ISPSD '95.

[7]  I. Takata,et al.  600 V trench IGBT in comparison with planar IGBT-an evaluation of the limit of IGBT performance , 1994, Proceedings of the 6th International Symposium on Power Semiconductor Devices and Ics.

[8]  Y. Seki,et al.  Switching loss analysis of shorted drain non punch-through and punch-through type IGBTs in voltage resonant circuit , 1991, [1991] Proceedings of the 3rd International Symposium on Power Semiconductor Devices and ICs.