Efficient and stable CH3NH3PbI3-sensitized ZnO nanorod array solid-state solar cells.

We report for the first time the use of a perovskite (CH3NH3PbI3) absorber in combination with ZnO nanorod arrays (NRAs) for solar cell applications. The perovskite material has a higher absorption coefficient than molecular dye sensitizers, gives better solar cell stability, and is therefore more suited as a sensitizer for ZnO NRAs. A solar cell efficiency of 5.0% was achieved under 1000 W m(-2) AM 1.5 G illumination for a solar cell with the structure: ZnO NRA/CH3NH3PbI3/spiro-MeOTAD/Ag. Moreover, the solar cell shows a good long-term stability. Using transient photocurrent and photovoltage measurements it was found that the electron transport time and lifetime vary with the ZnO nanorod length, a trend which is similar to that in dye-sensitized solar cells, DSCs, suggesting a similar charge transfer process in ZnO NRA/CH3NH3PbI3 solar cells as in conventional DSCs. Compared to CH3NH3PbI3/TiO2 solar cells, ZnO shows a lower performance due to more recombination losses.

[1]  H. Sue,et al.  Solid-state dye-sensitized solar cells based on ZnO nanoparticle and nanorod array hybrid photoanodes , 2011, Nanoscale research letters.

[2]  Michael Grätzel,et al.  Efficiency improvement in solid-state-dye-sensitized photovoltaics with an amphiphilic Ruthenium-dye , 2005 .

[3]  Kijung Yong,et al.  Hybrid-type quantum-dot cosensitized ZnO nanowire solar cell with enhanced visible-light harvesting. , 2013, ACS applied materials & interfaces.

[4]  Peng Gao,et al.  Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells. , 2012, Journal of the American Chemical Society.

[5]  Hidetoshi Miura,et al.  High efficiency of dye-sensitized solar cells based on metal-free indoline dyes. , 2004, Journal of the American Chemical Society.

[6]  Jenny Nelson,et al.  Hybrid polymer/zinc oxide photovoltaic devices with vertically oriented ZnO nanorods and an amphiphilic molecular interface layer. , 2006, The journal of physical chemistry. B.

[7]  H. Sue,et al.  ZnO and conjugated polymer bulk heterojunction solar cells containing ZnO nanorod photoanode , 2011, Nanotechnology.

[8]  Josef Salbeck,et al.  Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies , 1998, Nature.

[9]  G. Boschloo,et al.  Interpretation of small-modulation photocurrent transients in dye-sensitized solar cells - A film thickness study , 2010 .

[10]  Michael Grätzel,et al.  Porphyrin-Sensitized Solar Cells with Cobalt (II/III)–Based Redox Electrolyte Exceed 12 Percent Efficiency , 2011, Science.

[11]  Fan Wu,et al.  Device Performance Correlated with Structural Properties of Vertically Aligned Nanorod Arrays in Polymer/ZnO Solar Cells , 2010 .

[12]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.

[13]  Fan Wu,et al.  Device Performance Related to Amphiphilic Modification at Charge Separation Interface in Hybrid Solar Cells with Vertically Aligned ZnO Nanorod Arrays , 2011 .

[14]  Michael Grätzel,et al.  Tris(2-(1H-pyrazol-1-yl)pyridine)cobalt(III) as p-type dopant for organic semiconductors and its application in highly efficient solid-state dye-sensitized solar cells. , 2011, Journal of the American Chemical Society.

[15]  Yicheng Lu,et al.  Fast electron transport in metal organic vapor deposition grown dye-sensitized ZnO nanorod solar cells. , 2006, The journal of physical chemistry. B.

[16]  Yi-Mu Lee,et al.  Optimization of processing parameters on the controlled growth of ZnO nanorod arrays for the performance improvement of solid-state dye-sensitized solar cells , 2011 .

[17]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[18]  N. Park,et al.  Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9% , 2012, Scientific Reports.

[19]  Juan A. Anta,et al.  ZnO-Based Dye-Sensitized Solar Cells , 2012 .

[20]  G. Boschloo,et al.  Design of organic dyes and cobalt polypyridine redox mediators for high-efficiency dye-sensitized solar cells. , 2010, Journal of the American Chemical Society.

[21]  Donal D. C. Bradley,et al.  Hybrid polymer/metal oxide solar cells based on ZnO columnar structures , 2006 .

[22]  Peidong Yang,et al.  Nanowire dye-sensitized solar cells , 2005, Nature materials.

[23]  Tomas Edvinsson,et al.  Comparison of Dye-Sensitized ZnO and TiO2 Solar Cells: Studies of Charge Transport and Carrier Lifetime , 2007 .

[24]  E. Spoerke,et al.  Improved performance of poly(3-hexylthiophene)/zinc oxide hybrid photovoltaics modified with interfacial nanocrystalline cadmium sulfide , 2009 .

[25]  D. Shen,et al.  Enhanced Efficiency of Polymer/ZnO Nanorods Hybrid Solar Cell Sensitized by CdS Quantum Dots , 2011 .

[26]  Di Gao,et al.  High-efficiency solid-state dye-sensitized solar cells based on TiO(2)-coated ZnO nanowire arrays. , 2012, Nano letters.

[27]  Peidong Yang,et al.  Low-temperature wafer-scale production of ZnO nanowire arrays. , 2003, Angewandte Chemie.

[28]  A. J. Frank,et al.  Electrons in nanostructured TiO2 solar cells: Transport, recombination and photovoltaic properties , 2004 .

[29]  Di Gao,et al.  Solid-state dye-sensitized solar cells based on ordered ZnO nanowire arrays , 2012, Nanotechnology.

[30]  H. Snaith,et al.  Pore Filling of Spiro‐OMeTAD in Solid‐State Dye‐Sensitized Solar Cells Determined Via Optical Reflectometry , 2012 .

[31]  Mark W. B. Wilson,et al.  Efficient ZnO Nanowire Solid-State Dye-Sensitized Solar Cells Using Organic Dyes and Core−shell Nanostructures , 2009 .