A materials perspective on Li-ion batteries at extreme temperatures
暂无分享,去创建一个
Pulickel M. Ajayan | Hemtej Gullapalli | Kaushik Kalaga | Marco-Tulio F. Rodrigues | P. Ajayan | K. Kalaga | H. Gullapalli | G. Babu | Keiko Kato | F. Sayed | Keiko Kato | Jarin Joyner | Ganguli Babu | Farheen N. Sayed | J. Joyner | M. Rodrigues
[1] F. Ding,et al. High-temperature performance of all-solid-state battery assembled with 95(0.7Li2S-0.3P2S5)-5Li3PO4 glass electrolyte , 2016 .
[2] Marco-Tulio F. Rodrigues,et al. Rate limiting activity of charge transfer during lithiation from ionic liquids , 2016 .
[3] Tao Yu,et al. Polyimide binder by combining with polyimide separator for enhancing the electrochemical performance of lithium ion batteries , 2016 .
[4] Weishan Li,et al. A novel imidazole-based electrolyte additive for improved electrochemical performance at elevated temperature of high-voltage LiNi0.5Mn1.5O4 cathodes , 2016 .
[5] Jeff Dahn,et al. A systematic study on the reactivity of different grades of charged Li[Ni x Mn y Co z ]O 2 with electrolyte at elevated temperatures using accelerating rate calorimetry , 2016 .
[6] Z. Zuo,et al. Effect of Trace Al Surface Doping on the Structure, Surface Chemistry and Low Temperature Performance of LiNi0.5Co0.2Mn0.3O2 Cathode , 2016 .
[7] H. Pham,et al. Understanding the interfacial phenomena of a 4.7 V and 55 °C Li-ion battery with Li-rich layered oxide cathode and graphite anode and its correlation to high-energy cycling performance , 2016 .
[8] S. Okada,et al. Electrochemical Properties and Thermal Stability of Silicon Monoxide Anode for Rechargeable Lithium-Ion Batteries , 2016 .
[9] J. Xia,et al. Tris(trimethylsilyl) borate as an electrolyte additive for high-voltage lithium-ion batteries using LiNi1/3Mn1/3Co1/3O2 cathode , 2016 .
[10] L. E. Ouatani,et al. Temperature effects on Li 4 Ti 5 O 12 electrode/electrolyte interfaces at the first cycle: A X-ray Photoelectron Spectroscopy and Scanning Auger Microscopy study , 2016 .
[11] P. Ajayan,et al. Ionic Liquid-Organic Carbonate Electrolyte Blends To Stabilize Silicon Electrodes for Extending Lithium Ion Battery Operability to 100 °C. , 2016, ACS applied materials & interfaces.
[12] P. Ajayan,et al. Hexagonal Boron Nitride‐Based Electrolyte Composite for Li‐Ion Battery Operation from Room Temperature to 150 °C , 2016 .
[13] Hongyuan Zhao,et al. Enhanced elevated-temperature performance of LiAlxSi0.05Mg0.05Mn1.90-xO4 (0≤x≤0.08) cathode materials for high-performance lithium-ion batteries , 2016 .
[14] Satoshi Hori,et al. High-power all-solid-state batteries using sulfide superionic conductors , 2016, Nature Energy.
[15] Iek-Heng Chu,et al. Thermal Stability and Reactivity of Cathode Materials for Li-Ion Batteries. , 2016, ACS applied materials & interfaces.
[16] B. Scrosati,et al. Ionic-Liquid-Based Polymer Electrolytes for Battery Applications. , 2016, Angewandte Chemie.
[17] D. Aurbach,et al. Low Temperature Performance of Amorphous Monolithic Silicon Anodes: Comparative Study of Silicon and Graphite Electrodes , 2016 .
[18] Qingsong Wang,et al. Study on High Temperature Stability of LiNi0.33Co0.33Mn0.33O2/Li4Ti5O12Cells from the Safety Perspective , 2016 .
[19] C. Ziebert,et al. Phosphate Based Ceramics As Solid Electrolyte for High Temperature Lithium Ion Batteries , 2016 .
[20] Weidong He,et al. Materials insights into low-temperature performances of lithium-ion batteries , 2015 .
[21] Marco-Tulio F. Rodrigues,et al. Quasi-Solid Electrolytes for High Temperature Lithium Ion Batteries. , 2015, ACS applied materials & interfaces.
[22] K. Edström,et al. Depth profiling the solid electrolyte interphase on lithium titanate (Li4Ti5O12) using synchrotron-based photoelectron spectroscopy , 2015 .
[23] S. Ong,et al. Design principles for solid-state lithium superionic conductors. , 2015, Nature materials.
[24] K. Jalkanen,et al. Cycle aging of commercial NMC/graphite pouch cells at different temperatures , 2015 .
[25] Chenghao Yang,et al. Surfactants assisted synthesis and electrochemical properties of nano-LiFePO4/C cathode materials for low temperature applications , 2015 .
[26] Feng Wu,et al. Role of Cobalt Content in Improving the Low-Temperature Performance of Layered Lithium-Rich Cathode Materials for Lithium-Ion Batteries. , 2015, ACS applied materials & interfaces.
[27] A. Sastry,et al. Degradation of the solid electrolyte interphase induced by the deposition of manganese ions , 2015 .
[28] Feixiang Wu,et al. Li-ion battery materials: present and future , 2015 .
[29] Y. Chiang,et al. Mitigating mechanical failure of crystalline silicon electrodes for lithium batteries by morphological design. , 2015, Physical chemistry chemical physics : PCCP.
[30] T. Yano,et al. Improved High-Temperature Performance and Surface Chemistry of Graphite/LiMn2O4 Li-Ion Cells by Fluorosilane-Based Electrolyte Additive , 2015 .
[31] Qiang Wu,et al. Evaluation of the low temperature performance of lithium manganese oxide/lithium titanate lithium-ion batteries for start/stop applications , 2015 .
[32] Yan‐Bing He,et al. Suppression of interfacial reactions between Li4Ti5O12 electrode and electrolyte solution via zinc oxide coating , 2015 .
[33] C. Koo,et al. Hybrid ionogel electrolytes for high temperature lithium batteries , 2015 .
[34] Yunlong Zhao,et al. Hierarchical Carbon Decorated Li3V2(PO4)3 as a Bicontinuous Cathode with High‐Rate Capability and Broad Temperature Adaptability , 2014 .
[35] Kai Xie,et al. High temperature property of all-solid-state thin film lithium battery using LiPON electrolyte , 2014 .
[36] C. Cao,et al. Lithium titanate epitaxial coating on spinel lithium manganese oxide surface for improving the performance of lithium storage capability. , 2014, ACS applied materials & interfaces.
[37] M. Wohlfahrt‐Mehrens,et al. Temperature dependent ageing mechanisms in Lithium-ion batteries – A Post-Mortem study , 2014 .
[38] G. Amatucci,et al. Effect of cation and anion doping on microstructure and electrochemical properties of the LiMn1.5Ni0.5O4−δ spinel , 2014 .
[39] Minggao Ouyang,et al. Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry , 2014 .
[40] A. Mauger,et al. Surface modifications of electrode materials for lithium-ion batteries: status and trends , 2014, Ionics.
[41] Taeeun Yim,et al. Effect of additives on electrochemical performance of lithium nickel cobalt manganese oxide at high temperature , 2014 .
[42] Andrea Balducci,et al. Lithium Ion Transport and Solvation in N-Butyl-N-methylpyrrolidinium Bis(trifluoromethanesulfonyl)imide–Propylene Carbonate Mixtures , 2014 .
[43] Il-Doo Kim,et al. Synthesis of an Al2O3-coated polyimide nanofiber mat and its electrochemical characteristics as a separator for lithium ion batteries , 2014 .
[44] Jiulin Wang,et al. A polyimide ion-conductive protection layer to suppress side reactions on Li4Ti5O12 electrodes at elevated temperature , 2014 .
[45] Bo Zhang,et al. Sustainable, heat-resistant and flame-retardant cellulose-based composite separator for high-performance lithium ion battery , 2014, Scientific Reports.
[46] D. Mitlin,et al. Si nanotubes ALD coated with TiO2, TiN or Al2O3 as high performance lithium ion battery anodes , 2014 .
[47] A. Benayad,et al. Is Li4Ti5O12 a solid-electrolyte-interphase-free electrode material in Li-ion batteries? Reactivity between the Li4Ti5O12 electrode and electrolyte , 2014 .
[48] Ji‐Guang Zhang,et al. Mixed salts of LiTFSI and LiBOB for stable LiFePO4-based batteries at elevated temperatures , 2014 .
[49] Rohan Akolkar,et al. Modeling dendrite growth during lithium electrodeposition at sub-ambient temperature , 2014 .
[50] L. Liao,et al. Enhancement of low-temperature performance of LiFePO4 electrode by butyl sultone as electrolyte additive , 2014 .
[51] Yu‐Guo Guo,et al. A novel polymer electrolyte with improved high-temperature-tolerance up to 170 °C for high-temperature lithium-ion batteries , 2013 .
[52] K. Amine,et al. Fluorinated electrolytes for Li-ion battery: An FEC-based electrolyte for high voltage LiNi0.5Mn1.5O4/graphite couple , 2013 .
[53] Michael Pecht,et al. Lessons Learned from the 787 Dreamliner Issue on Lithium-Ion Battery Reliability , 2013 .
[54] Yu‐Guo Guo,et al. Enhanced working temperature of PEO-based polymer electrolyte via porous PTFE film as an efficient heat resister , 2013 .
[55] Rémi Dedryvère,et al. Lithium secondary batteries working at very high temperature: capacity fade and understanding of aging mechanisms , 2013 .
[56] Meiten Koh,et al. Fluorinated electrolytes for 5 V lithium-ion battery chemistry , 2013 .
[57] Pierre-Louis Taberna,et al. Outstanding performance of activated graphene based supercapacitors in ionic liquid electrolyte from −50 to 80 °C , 2013 .
[58] Rachid Meziane,et al. Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries. , 2013, Nature materials.
[59] M. Ishikawa,et al. High-performance graphite negative electrode in a bis(fluorosulfonyl)imide-based ionic liquid , 2013 .
[60] Yang Ren,et al. New class of nonaqueous electrolytes for long-life and safe lithium-ion batteries , 2013, Nature Communications.
[61] S. Mitra,et al. High-rate and high-energy-density lithium-ion battery anode containing 2D MoS₂ nanowall and cellulose binder. , 2013, ACS applied materials & interfaces.
[62] G. Cui,et al. A high temperature operating nanofibrous polyimide separator in Li-ion battery , 2013 .
[63] Lei Li,et al. Tris(trimethylsilyl) borate as an electrolyte additive to improve the cyclability of LiMn2O4 cathode for lithium-ion battery , 2013 .
[64] L. Liao,et al. Fluoroethylene carbonate as electrolyte additive to improve low temperature performance of LiFePO4 electrode , 2013 .
[65] Wei Lv,et al. Gassing in Li4Ti5O12-based batteries and its remedy , 2012, Scientific Reports.
[66] Huang Zhang,et al. Effects of carbon coating and metal ions doping on low temperature electrochemical properties of LiFePO4 cathode material , 2012 .
[67] Chong Seung Yoon,et al. Nanostructured high-energy cathode materials for advanced lithium batteries. , 2012, Nature materials.
[68] Kang Xu,et al. Li^+-solvation/desolvation dictates interphasial processes on graphitic anode in Li ion cells , 2012 .
[69] V. Battaglia,et al. Hard carbon: a promising lithium-ion battery anode for high temperature applications with ionic electrolyte , 2012 .
[70] L. Liao,et al. Effects of temperature on charge/discharge behaviors of LiFePO4 cathode for Li-ion batteries , 2012 .
[71] M. Winter,et al. Thermally Induced Reactions between Lithiated Nano-Silicon Electrode and Electrolyte for Lithium-Ion Batteries , 2012 .
[72] Hui Zhan,et al. A New Class of Phosphates as Co-Solvents for Nonflammable Lithium Ion Batteries Electrolytes , 2012 .
[73] W. Henderson,et al. Phase Behavior of Ionic Liquid–LiX Mixtures: Pyrrolidinium Cations and TFSI– Anions – Linking Structure to Transport Properties , 2011 .
[74] John T. Vaughey,et al. Variable temperature performance of intermetallic lithium-ion battery anode materials , 2011 .
[75] Zhibin Zhou,et al. Lithium (fluorosulfonyl)(nonafluorobutanesulfonyl)imide (LiFNFSI) as conducting salt to improve the high-temperature resilience of lithium-ion cells , 2011 .
[76] Chusheng Chen,et al. A comparative study on the low-temperature performance of LiFePO4/C and Li3V2(PO4)(3)/C cathodes for lithium-ion batteries , 2011 .
[77] Marshall C. Smart,et al. Lithium-Ion Electrolytes Containing Ester Cosolvents for Improved Low Temperature Performance , 2010 .
[78] Doron Aurbach,et al. On the Study of Electrolyte Solutions for Li-Ion Batteries That Can Work Over a Wide Temperature Range , 2010 .
[79] Sung Chul Hong,et al. Effect of microporous structure on thermal shrinkage and electrochemical performance of Al2O3/poly(vinylidene fluoride-hexafluoropropylene) composite separators for lithium-ion batteries , 2010 .
[80] Young Gyu Kim,et al. Linear-Sweep Thermammetry Study on Corrosion Behavior of Al Current Collector in Ionic Liquid Solvent , 2010 .
[81] Dinh Vinh Do,et al. Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery , 2010 .
[82] Jaephil Cho,et al. High Performance LiCoO2 Cathode Materials at 60 ° C for Lithium Secondary Batteries Prepared by the Facile Nanoscale Dry-Coating Method , 2010 .
[83] D. J. Lee,et al. Effect of fluoroethylene carbonate on high temperature capacity retention of LiMn2O4/graphite Li-ion cells , 2010 .
[84] Zonghai Chen,et al. Lithium Tetrafluoro Oxalato Phosphate as Electrolyte Additive for Lithium-Ion Cells , 2010 .
[85] R. E. Del Sesto,et al. Limited thermal stability of imidazolium and pyrrolidinium ionic liquids , 2009 .
[86] Mo-hua Yang,et al. Effects of TiO2 coating on high-temperature cycle performance of LiFePO4-based lithium-ion batteries , 2008 .
[87] K. Xu. Tailoring Electrolyte Composition for LiBOB , 2008 .
[88] C. Delmas,et al. Electrochemical performances in temperature for a C-containing LiFePO4 composite synthesized at high temperature , 2008 .
[89] F. Gao,et al. Kinetic behavior of LiFePO4/C cathode material for lithium-ion batteries , 2008 .
[90] Karim Zaghib,et al. Accelerating rate calorimetry studies of the reactions between ionic liquids and charged lithium ion battery electrode materials , 2007 .
[91] J. Tarascon,et al. Development and implementation of a high temperature electrochemical cell for lithium batteries , 2007 .
[92] Linda F. Nazar,et al. Review on electrode–electrolyte solution interactions, related to cathode materials for Li-ion batteries , 2007 .
[93] J. Dahn,et al. Phase Changes in Electrochemically Lithiated Silicon at Elevated Temperature , 2006 .
[94] B. Scrosati,et al. Advanced, lithium batteries based on high-performance composite polymer electrolytes , 2006 .
[95] Shengbo Zhang,et al. An unique lithium salt for the improved electrolyte of Li-ion battery , 2006 .
[96] Jiang Fan,et al. Studies on Charging Lithium-Ion Cells at Low Temperatures , 2006 .
[97] Brett L. Lucht,et al. Thermal Decomposition of LiPF6-Based Electrolytes for Lithium-Ion Batteries , 2005 .
[98] T. Ohzuku,et al. Electrochemical behaviors of LiCo 1/3Ni 1/3Mn 1/3O 2 in lithium batteries at elevated temperatures , 2005 .
[99] M. Ue,et al. Li [ C 2 F 5 BF 3 ] as an Electrolyte Salt for 4 V Class Lithium-Ion Cells , 2005 .
[100] Y. W. Kim,et al. Thermal history effects on the ionic conductivity of PEO-salt electrolytes , 2004 .
[101] Kang Xu,et al. Electrochemical impedance study on the low temperature of Li-ion batteries , 2004 .
[102] Chester G. Motloch,et al. Effect of cathode composition on capacity fade, impedance rise and power fade in high-power, lithium-ion cells☆ , 2003 .
[103] Marshall C. Smart,et al. Improved performance of lithium-ion cells with the use of fluorinated carbonate-based electrolytes , 2003 .
[104] Nobuko Yoshimoto,et al. Anodic behavior of aluminum current collector in LiTFSI solutions with different solvent compositions , 2003 .
[105] Kang Xu,et al. The low temperature performance of Li-ion batteries , 2003 .
[106] Kang Xu,et al. Low temperature performance of graphite electrode in Li-ion cells , 2002 .
[107] Kang Xu,et al. A new approach toward improved low temperature performance of Li-ion battery , 2002 .
[108] D. D. MacNeil,et al. A comparison of the electrode/electrolyte reaction at elevated temperatures for various Li-ion battery cathodes , 2002 .
[109] Subbarao Surampudi,et al. Use of Organic Esters as Cosolvents in Electrolytes for Lithium-Ion Batteries with Improved Low Temperature Performance , 2002 .
[110] D. Aurbach,et al. On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries , 2002 .
[111] M. Armand,et al. Issues and challenges facing rechargeable lithium batteries , 2001, Nature.
[112] D. Linden. Handbook Of Batteries , 2001 .
[113] Richard A. Marsh,et al. Electrochemical Stability of Copper in Lithium‐Ion Battery Electrolytes , 2000 .
[114] J. Sakamoto,et al. The Limits of Low‐Temperature Performance of Li‐Ion Cells , 2000 .
[115] Edward J. Plichta,et al. A low-temperature electrolyte for lithium and lithium-ion batteries , 2000 .
[116] Martin Winter,et al. Electrochemical lithiation of tin and tin-based intermetallics and composites , 1999 .