Revolutionizing perovskite solar cells: Enhancing current density through Zr doping in MAPbBr3 to engineer shifted band gap edges near the electron transport layer

[1]  S. Hussain,et al.  Tungsten dopant incorporation for bandgap and type engineering of perovskite crystals , 2023, Physica Scripta.

[2]  Amit Sharma,et al.  Potassium hexacyanoferrate(III): A promising additive for perovskite precursors in carbon-based perovskite solar cells , 2023, Optical Materials.

[3]  S. Hussain,et al.  Understanding the influence of Cu ions implantation towards highly efficient MAPbBr3 perovskite solar cells , 2023, Optical Materials.

[4]  S. Hussain,et al.  Tuning the band gap edges of perovskite material by Cd doping for achieving high current density in perovskite solar cells , 2023, Ceramics International.

[5]  S. Hussain,et al.  700 keV Au ions beam effect on the structural, optical and photovoltaic properties of MAPbI3 solar cells , 2022, Ceramics International.

[6]  S. Hussain,et al.  The Effect of 600 keV Ag Ion Irradiation on the Structural, Optical, and Photovoltaic Properties of MAPbBr3 Films for Perovksite Solar Cell Applications , 2022, Materials.

[7]  S. Hussain,et al.  Effect of Cd Doping on the Structural, Optical, and Photovoltaic Properties of SnS Films , 2022, Journal of Materials Research and Technology.

[8]  Samy F. Mahmoud,et al.  Decorating wide band gap CH3NH3PbBr3 perovskite with 4AMP for highly efficient and enhanced open circuit voltage perovskite solar cells , 2021, Solar Energy.

[9]  S. Hussain,et al.  Investigations the structural, optical and photovoltaic properties of La doped TiO2 photoanode based dye sensitized solar cells , 2021, Optical Materials.

[10]  Jiaguo Yu,et al.  CsPbBr3 Nanocrystal Induced Bilateral Interface Modification for Efficient Planar Perovskite Solar Cells , 2021, Advanced science.

[11]  Wenjing Yu,et al.  Recent advances on interface engineering of perovskite solar cells , 2021, Nano Research.

[12]  S. Iwata,et al.  Effects of annealing temperature on microstructural, magnetic properties, and specific absorption rate of Zn-Ni ferrite nanoparticles , 2021, Materials Research Express.

[13]  G. Mustafa,et al.  Improved photovoltaic properties of dye sensitized solar cell by irradiations of Ni2+ ions on Ag‐doped TiO2 photoanode , 2021, International Journal of Energy Research.

[14]  Rongjian Sa,et al.  Theoretical study of Zr doping on the stability, mechanical, electronic and optical properties of Cs2TiI6 , 2020 .

[15]  O. Prezhdo,et al.  Edge Influence on Charge Carrier Localization and Lifetime in CH3NH3PbBr3 Perovskite: Ab Initio Quantum Dynamics Simulation. , 2020, The journal of physical chemistry letters.

[16]  I. White,et al.  Flexible optoelectronic devices based on metal halide perovskites , 2020, Nano Research.

[17]  M. Johnston,et al.  Charge-Carrier Trapping Dynamics in Bismuth-Doped Thin Films of MAPbBr3 Perovskite. , 2020, The journal of physical chemistry letters.

[18]  N. Ravindra,et al.  Energy Gap-Refractive Index Relations in Perovskites , 2020, Materials.

[19]  Oskar J. Sandberg,et al.  On the Question of the Need for a Built‐In Potential in Perovskite Solar Cells , 2020, Advanced Materials Interfaces.

[20]  S. Meloni,et al.  How far does the defect tolerance of lead-halide perovskites range? The example of Bi impurities introducing efficient recombination centers , 2019, Journal of Materials Chemistry A.

[21]  Xiaojuan Li,et al.  Defect step controlled growth of perovskite MAPbBr3 single crystal , 2019, Journal of Materials Science.

[22]  Y. Kanemitsu,et al.  Effects of Impurity Doping on Photoluminescence Properties of APbX3 Lead Halide Perovskites , 2019, physica status solidi (b).

[23]  Wenzhu Liu,et al.  Zr‐Doped Indium Oxide (IZRO) Transparent Electrodes for Perovskite‐Based Tandem Solar Cells , 2019, Advanced Functional Materials.

[24]  Lili Wu,et al.  Doping-Enhanced Visible-Light Absorption of CH3NH3PbBr3 by the Bi3+-Induced Impurity Band without Sacrificing a Band gap , 2019, The Journal of Physical Chemistry C.

[25]  O. Bakr,et al.  Metal-Doped Lead Halide Perovskites: Synthesis, Properties, and Optoelectronic Applications , 2018, Chemistry of Materials.

[26]  C. H. Ng,et al.  Magnesium-Doped MAPbI3 Perovskite Layers for Enhanced Photovoltaic Performance in Humid Air Atmosphere. , 2018, ACS applied materials & interfaces.

[27]  J. Wei,et al.  Enhanced efficiency of perovskite solar cells by introducing controlled chloride incorporation into MAPbI3 perovskite films , 2018, Electrochimica Acta.

[28]  T. Ma,et al.  Dependence of Acetate-Based Antisolvents for High Humidity Fabrication of CH3NH3PbI3 Perovskite Devices in Ambient Atmosphere. , 2018, ACS applied materials & interfaces.

[29]  Zhengqi Shi,et al.  Perovskites-Based Solar Cells: A Review of Recent Progress, Materials and Processing Methods , 2018, Materials.

[30]  O. Prezhdo,et al.  Halide Composition Controls Electron-Hole Recombination in Cesium-Lead Halide Perovskite Quantum Dots: A Time Domain Ab Initio Study. , 2018, The journal of physical chemistry letters.

[31]  Takashi Minemoto,et al.  Mixed Sn-Ge Perovskite for Enhanced Perovskite Solar Cell Performance in Air. , 2018, The journal of physical chemistry letters.

[32]  M. Wasielewski,et al.  Hybrid Dion-Jacobson 2D Lead Iodide Perovskites. , 2018, Journal of the American Chemical Society.

[33]  Y. D. Zhang,et al.  CH3NH3Pb1−xMgxI3 perovskites as environmentally friendly photovoltaic materials , 2018 .

[34]  Jing Zhang,et al.  Ba2+ Doped CH3NH3PbI3 to Tune the Energy State and Improve the Performance of Perovskite Solar Cells , 2017 .

[35]  Muthaiah Shellaiah,et al.  Structural and Photophysical Properties of Methylammonium Lead Tribromide (MAPbBr3) Single Crystals , 2017, Scientific Reports.

[36]  T. Hayat,et al.  Temperature-assisted rapid nucleation: a facile method to optimize the film morphology for perovskite solar cells , 2017 .

[37]  L. Kronik,et al.  Light-induced picosecond rotational disordering of the inorganic sublattice in hybrid perovskites , 2017, Science Advances.

[38]  U. Bach,et al.  Diammonium and Monoammonium Mixed‐Organic‐Cation Perovskites for High Performance Solar Cells with Improved Stability , 2017 .

[39]  Zhong‐Yong Yuan,et al.  Boron and phosphorus co-doped carbon counter electrode for efficient hole-conductor-free perovskite solar cell , 2017 .

[40]  Wei Huang,et al.  Lead‐Free Organic–Inorganic Hybrid Perovskites for Photovoltaic Applications: Recent Advances and Perspectives , 2017, Advanced materials.

[41]  Jiang Tang,et al.  Bandgap tunable Csx(CH3NH3)1-xPbI3 perovskite nanowires by aqueous solution synthesis for optoelectronic devices. , 2017, Nanoscale.

[42]  Jingjing Zhao,et al.  Low Temperature Solution-Processed Sb:SnO2 Nanocrystals for Efficient Planar Perovskite Solar Cells. , 2016, ChemSusChem.

[43]  B. Song,et al.  Ultrabroad Photoluminescence and Electroluminescence at New Wavelengths from Doped Organometal Halide Perovskites. , 2016, The journal of physical chemistry letters.

[44]  Satyaprasad P. Senanayak,et al.  Impact of Monovalent Cation Halide Additives on the Structural and Optoelectronic Properties of CH3NH3PbI3 Perovskite , 2016 .

[45]  Wei Zhang,et al.  Pinhole-free perovskite films for efficient solar modules , 2016 .

[46]  H. Ohkita,et al.  Photovoltaic Performance of Perovskite Solar Cells with Different Grain Sizes , 2016, Advanced materials.

[47]  Aslihan Babayigit,et al.  Assessing the toxicity of Pb- and Sn-based perovskite solar cells in model organism Danio rerio , 2016, Scientific Reports.

[48]  Bernd Rech,et al.  A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells , 2016, Science.

[49]  Oleksandr Voznyy,et al.  Heterovalent Dopant Incorporation for Bandgap and Type Engineering of Perovskite Crystals. , 2016, The journal of physical chemistry letters.

[50]  Yongbo Yuan,et al.  Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells , 2016, Nature Energy.

[51]  T. White,et al.  Mechanical properties of organic–inorganic halide perovskites, CH3NH3PbX3 (X = I, Br and Cl), by nanoindentation , 2015 .

[52]  E. Sargent,et al.  Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals , 2015, Science.

[53]  Ni Zhao,et al.  The Role of Chlorine in the Formation Process of “CH3NH3PbI3‐xClx” Perovskite , 2014 .

[54]  Q. Gong,et al.  A highly efficient mesoscopic solar cell based on CH₃NH₃PbI(3-x)Cl(x) fabricated via sequential solution deposition. , 2014, Chemical communications.

[55]  Miaoqiang Lyu,et al.  Composition-dependent photoluminescence intensity and prolonged recombination lifetime of perovskite CH3NH3PbBr(3-x)Cl(x) films. , 2014, Chemical communications.

[56]  Tao Song,et al.  High-performance planar heterojunction perovskite solar cells: Preserving long charge carrier diffusion lengths and interfacial engineering , 2014, Nano Research.

[57]  Sandeep Kumar Pathak,et al.  Lead-free organic–inorganic tin halide perovskites for photovoltaic applications , 2014 .

[58]  Yunlong Guo,et al.  Enhancement in the efficiency of an organic–inorganic hybrid solar cell with a doped P3HT hole-transporting layer on a void-free perovskite active layer , 2014 .

[59]  Jin Young Kim,et al.  Cesium-doped methylammonium lead iodide perovskite light absorber for hybrid solar cells , 2014 .

[60]  Tingting Shi,et al.  Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance , 2014, Advanced materials.

[61]  R. Chauvin,et al.  Carbo-graphite: Structural, Mechanical, and Electronic Properties , 2013 .

[62]  A. Bahadur,et al.  Correlation Between Refractive Index and Electronegativity Difference for ANB8-NType Binary Semiconductors , 2013 .

[63]  Peyman Servati,et al.  An efficient inverted organic solar cell with improved ZnO and gold contact layers , 2012 .

[64]  T. Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[65]  M. Islam,et al.  Optical properties of CeO2 thin films , 2007 .

[66]  Ceji Fu,et al.  Unusual photon tunneling in the presence of a layer with a negative refractive index , 2002 .

[67]  Andreas Schönleber,et al.  The role of PbI2 in CH3NH3PbI3 perovskite stability, solar cell parameters and device degradation. , 2017, Physical chemistry chemical physics : PCCP.

[68]  M. I. Khan,et al.  Structural, electrical and optical properties of multilayer TiO 2 thin films deposited by sol–gel spin coating , 2017 .

[69]  D. Mitzi,et al.  Inorganic Perovskites : Structural Versatility for Functional Materials Design , 2016 .

[70]  Hyun Suk Jung,et al.  Perovskite solar cells: from materials to devices. , 2015, Small.

[71]  Alain Goriely,et al.  Morphological Control for High Performance, Solution‐Processed Planar Heterojunction Perovskite Solar Cells , 2014 .