Terrestrial laser scanning for estimating urban tree volume and carbon content

The acquisition of single-tree-related information is an important task, especially in urban areas where there is an increasing interest in standing carbon stock. Therefore, an easy and robust method was developed to extract the volume, diameter at breast height (DBH) and height of single trees from point clouds of terrestrial laser scanning. For data acquisition, nine trees were scanned from several positions and the resulting high-resolution point clouds (20–60 million points) were analysed by an algorithm based on voxel structure. First, noise reduction was carried out, followed by filling of voxels inside the stem and branches through the intersection of four orthogonal viewing directions. After the elimination of erroneously generated fillings, volume was determined layer-wise for each cross section. For quality assessment, nine deciduous trees were selected, cut, weighed and analysed for wet specific gravity and carbon content in order to provide a control value. The estimated volumes agree with the control value within a range of –5.1% to +14.3%. This is also the case with DBH values; however, heights are systematically underestimated.

[1]  Richard A. Fournier,et al.  The structural and radiative consistency of three-dimensional tree reconstructions from terrestrial lidar , 2009 .

[2]  Cecil C. Konijnendijk,et al.  Urban Forests and Trees , 2005 .

[3]  Norbert Pfeifer,et al.  Structuring laser-scanned trees using 3D mathematical morphology , 2004 .

[4]  Harry T. Valentine,et al.  Subsampling trees for biomass, volume or mineral content , 1984 .

[5]  Alexander Bucksch,et al.  CAMPINO : A skeletonization method for point cloud processing , 2008 .

[6]  Michael A. Lefsky,et al.  Volume estimates of trees with complex architecture from terrestrial laser scanning , 2008 .

[7]  Stefan Norra,et al.  The astysphere and urban geochemistry—a new approach to integrate urban systems into the geoscientific concept of spheres and a challenging concept of modern geochemistry supporting the sustainable development of planet earth , 2009, Environmental science and pollution research international.

[8]  Alexander Bucksch,et al.  Applications for point cloud skeletonizations in forestry and agriculture , 2009 .

[9]  Maurizio Mencuccini,et al.  On simplifying allometric analyses of forest biomass , 2004 .

[10]  Lutz Fehrmann,et al.  Comparison of linear and mixed-effect regression models and a k-nearest neighbour approach for estimation of single-tree biomass , 2008 .

[11]  Unfccc.  Kyoto Protocol to the United Nations Framework Convention on Climate Change , 1997 .

[12]  Hui Xu,et al.  Knowledge and heuristic-based modeling of laser-scanned trees , 2007, TOGS.

[13]  N. Pfeifer,et al.  AUTOMATIC RECONSTRUCTION OF SINGLE TREES FROM TERRESTRIAL LASER SCANNER DATA , 2004 .

[14]  Harri Kaartinen,et al.  APPROXIMATION OF VOLUME AND BRANCH SIZE DISTRIBUTION OF TREES FROM LASER SCANNER DATA , 2012 .

[15]  Juha Hyyppä,et al.  BIOMASS ESTIMATION OF INDIVIDUAL TREES USING STEM AND CROWN DIAMETER TLS MEASUREMENTS , 2012 .

[16]  Alexander Bucksch,et al.  SkelTre - Robust skeleton extraction from imperfect point clouds , 2010, Vis. Comput..

[17]  N. Pfeifer,et al.  Modelling of Tree Cross Sections from Terrestrial Laser Scanning Data with Free-form Curves , 2004 .

[18]  Kerrie Mengersen,et al.  Estimating tree component biomass using variable probability sampling methods , 2001 .

[19]  W. Burrows,et al.  Allometric relationships and community biomass estimates for some dominant eucalypts in Central Queensland woodlands , 2000 .

[20]  G. Harrington.  Estimation of above-ground biomass of trees and shrubs , 1979 .

[21]  Dong-Ming Yan,et al.  Efficient and robust reconstruction of botanical branching structure from laser scanned points , 2009, 2009 11th IEEE International Conference on Computer-Aided Design and Computer Graphics.

[22]  M. Mettenleiter,et al.  TERRESTRIAL LASER SCANNING – NEW PERSPECTIVES IN 3D SURVEYING , 2004 .