Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery

Lithium metal, the ideal anode material for rechargeable batteries, suffers from the inherent limitations of sensitivity to the humid atmosphere and dendrite growth. Herein, low-cost fabrication of a metallic-lithium anode that is stable in air and plated dendrite-free from an organic-liquid electrolyte solves four key problems that have plagued the development of large-scale Li-ion batteries for storage of electric power. Replacing the low-capacity carbon anode with a safe, dendrite-free lithium anode provides a fast charge while reducing the cost of fabrication of a lithium battery, and increasing the cycle life of a rechargeable cell by eliminating the liquid-electrolyte ethylene-carbonate additive used to form a solid-electrolyte interphase passivation layer on the anode that is unstable during cycling. This solution is accomplished by formation of a hydrophobic solid-electrolyte interphase on a metallic-lithium anode that allows for handling of the treated lithium anode membrane in a standard dry room during cell fabrication.The lithium metal is a promising anode material for batteries; however, the growth of dendrite and its instability against moisture are two technical challenges. Here the authors address both issues by introducing a bifunctional layer consisting of hydrophobic graphite fluoride and lithium fluoride.

[1]  Lin Liu,et al.  Uniform Lithium Nucleation/Growth Induced by Lightweight Nitrogen‐Doped Graphitic Carbon Foams for High‐Performance Lithium Metal Anodes , 2018, Advanced materials.

[2]  Xiaogang Han,et al.  Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition. , 2015, ACS nano.

[3]  Kun Fu,et al.  Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid , 2017, Advanced materials.

[4]  Dougherty,et al.  Dendritic and fractal patterns in electrolytic metal deposits. , 1986, Physical review letters.

[5]  M. Otyepka,et al.  The surface and structural properties of graphite fluoride , 2015 .

[6]  Yi Cui,et al.  Reviving the lithium metal anode for high-energy batteries. , 2017, Nature nanotechnology.

[7]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[8]  J. Chai,et al.  High Performance Solid Polymer Electrolytes for Rechargeable Batteries: A Self‐Catalyzed Strategy toward Facile Synthesis , 2017, Advanced science.

[9]  Young-Sang Yu,et al.  The formation mechanism of fluorescent metal complexes at the Li(x)Ni(0.5)Mn(1.5)O(4-δ)/carbonate ester electrolyte interface. , 2015, Journal of the American Chemical Society.

[10]  R. C. Macridis.  A review , 1963 .

[11]  Andrew M. Minor,et al.  Electromechanical Probing of Li/Li2CO3 Core/Shell Particles in a TEM , 2013 .

[12]  Stefano de Gironcoli,et al.  QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials , 2009, Journal of physics. Condensed matter : an Institute of Physics journal.

[13]  Jaephil Cho,et al.  Unsymmetrical fluorinated malonatoborate as an amphoteric additive for high-energy-density lithium-ion batteries , 2018 .

[14]  Linda F. Nazar,et al.  Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes , 2016, Nature Energy.

[15]  Seong H. Kim,et al.  Tribochemical synthesis of nano-lubricant films from adsorbed molecules at sliding solid interface: Tribo-polymers from α-pinene, pinane, and n-decane , 2016 .

[16]  Shuru Chen,et al.  Organosulfide-plasticized solid-electrolyte interphase layer enables stable lithium metal anodes for long-cycle lithium-sulfur batteries , 2017, Nature Communications.

[17]  S. Hirano,et al.  Synthesis of hierarchical mesoporous nest-like Li4Ti5O12 for high-rate lithium ion batteries , 2012 .

[18]  Zonghai Chen,et al.  The role of nanotechnology in the development of battery materials for electric vehicles. , 2016, Nature nanotechnology.

[19]  John B. Goodenough,et al.  Alternative strategy for a safe rechargeable battery , 2017 .

[20]  A. MacDowell,et al.  Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes. , 2014, Nature materials.

[21]  Mihui Park,et al.  Recent Developments of the Lithium Metal Anode for Rechargeable Non‐Aqueous Batteries , 2016 .

[22]  W. Liu,et al.  Artificial Solid Electrolyte Interphase-Protected LixSi Nanoparticles: An Efficient and Stable Prelithiation Reagent for Lithium-Ion Batteries. , 2015, Journal of the American Chemical Society.

[23]  Luke P. Lee,et al.  Recent developments in superhydrophobic graphene and graphene-related materials: from preparation to potential applications. , 2015, Nanoscale.

[24]  Ji‐Guang Zhang,et al.  Lithium metal anodes for rechargeable batteries , 2014 .

[25]  W. Liu,et al.  Artificial Solid Electrolyte Interphase-Protected LixSi Nanoparticles: An Efficient and Stable Prelithiation Reagent for Lithium-Ion Batteries. , 2015, Journal of the American Chemical Society.

[26]  Yi Cui,et al.  Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes. , 2017, Nature nanotechnology.

[27]  B. Dunn,et al.  Conformal Lithium Fluoride Protection Layer on Three-Dimensional Lithium by Nonhazardous Gaseous Reagent Freon. , 2017, Nano letters.

[28]  J. Choi,et al.  The Synergistic Effect of Cation and Anion of an Ionic Liquid Additive for Lithium Metal Anodes , 2018 .

[29]  Lynden A. Archer,et al.  Design principles for electrolytes and interfaces for stable lithium-metal batteries , 2016, Nature Energy.

[30]  Ya‐Xia Yin,et al.  Advanced Porous Carbon Materials for High‐Efficient Lithium Metal Anodes , 2017 .

[31]  Allen Pei,et al.  Revealing Nanoscale Passivation and Corrosion Mechanisms of Reactive Battery Materials in Gas Environments. , 2017, Nano letters.

[32]  Arumugam Manthiram,et al.  Lithium battery chemistries enabled by solid-state electrolytes , 2017 .

[33]  Allen Pei,et al.  Surface Fluorination of Reactive Battery Anode Materials for Enhanced Stability. , 2017, Journal of the American Chemical Society.

[34]  Yi Cui,et al.  Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating , 2016, Proceedings of the National Academy of Sciences.

[35]  Lynden A Archer,et al.  Stable lithium electrodeposition in liquid and nanoporous solid electrolytes. , 2014, Nature materials.

[36]  Burke,et al.  Generalized Gradient Approximation Made Simple. , 1996, Physical review letters.

[37]  B. Dunn,et al.  Electrical Energy Storage for the Grid: A Battery of Choices , 2011, Science.

[38]  Bingbing Chen,et al.  Prescribing Functional Additives for Treating the Poor Performances of High‐Voltage (5 V‐class) LiNi0.5Mn1.5O4/MCMB Li‐Ion Batteries , 2018 .

[39]  Y. Bando,et al.  In Situ Electrochemistry of Rechargeable Battery Materials: Status Report and Perspectives , 2017, Advanced materials.

[40]  Z. Tang,et al.  MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries , 2017, Advanced materials.

[41]  Yanli Wang,et al.  Quantum ESPRESSO: a modular and open-source software project for quantum simulations of materials , 2009 .

[42]  Rui Zhang,et al.  Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review. , 2017, Chemical reviews.