TOROIDALLY RESOLVED STRUCTURE OF DIVERTOR HEAT FLUX IN RMP H-MODE DISCHARGES ON DIII-D
暂无分享,去创建一个
T. Petrie | T. Osborne | K. Burrell | P. Gohil | T. Evans | M. Fenstermacher | O. Schmitz | E. Unterberg | P. Snyder | L. Baylor | R. Wolf | A. Leonard | M. Schaffer | J. Degrassie | J. Boedo | R. Pinsker | M. Jakubowski | R. Moyer | C. Lasnier | J. Watkins | D. Orlov | S. Mordijck | H. Stoschus | T. Rhodes | C. Petty | R. Laengner
[1] T. Osborne,et al. Numerical analysis of the effects of normalized plasma pressure on RMP ELM suppression in DIII-D , 2010 .
[2] E. Nardon,et al. Quasi-linear MHD modelling of H-mode plasma response to resonant magnetic perturbations , 2010 .
[3] T. Osborne,et al. Resonant pedestal pressure reduction induced by a thermal transport enhancement due to stochastic magnetic boundary layers in high temperature plasmas. , 2009, Physical review letters.
[4] T. Osborne,et al. Overview of the results on divertor heat loads in RMP controlled H-mode plasmas on DIII-D , 2009 .
[5] T. Evans,et al. A conceptual model of the magnetic topology and nonlinear dynamics of ELMs , 2009 .
[6] J. Contributors,et al. ELM filament interaction with the JET main chamber , 2009 .
[7] K. Spatschek,et al. Aspects of three dimensional transport for ELM control experiments in ITER-similar shape plasmas at low collisionality in DIII-D , 2008 .
[8] J. S. deGrassie,et al. RMP ELM suppression in DIII-D plasmas with ITER similar shapes and collisionalities , 2008 .
[9] E. Wolfrum,et al. The filamentary structure of ELMs in the scrape-off layer in ASDEX Upgrade , 2007 .
[10] J. Contributors,et al. ELM resolved energy distribution studies in the JET MKII Gas-Box divertor using infra-red thermography , 2007 .
[11] R. Scannell,et al. Evolution of filament structures during edge-localized modes in the MAST Tokamak. , 2006, Physical review letters.
[12] S. Abdullaev,et al. Heat deposition patterns on the target plates of the dynamic ergodic divertor , 2005 .
[13] A. Field,et al. Structure of ELMs in MAST and the implications for energy deposition , 2005 .
[14] M E Fenstermacher,et al. Suppression of large edge-localized modes in high-confinement DIII-D plasmas with a stochastic magnetic boundary. , 2004, Physical review letters.
[15] T. Eich,et al. Nonaxisymmetric energy deposition pattern on ASDEX upgrade divertor target plates during type-I edge-localized modes. , 2003, Physical review letters.
[16] M. Sugihara,et al. Characteristics of type I ELM energy and particle losses in existing devices and their extrapolation to ITER , 2003 .
[17] R. Fitzpatrick. Plasma parameter scaling of the error-field penetration threshold in tokamaks , 2002 .
[18] T. Evans,et al. Modeling of stochastic magnetic flux loss from the edge of a poloidally diverted tokamak , 2002 .
[19] V. Riccardo,et al. Disruption heat loads on the JET MkIIGB divertor , 2002 .
[20] A. Herrmann,et al. Overview on stationary and transient divertor heat loads , 2002 .
[21] C. H. Skinner,et al. Plasma{material interactions in current tokamaks and their implications for next step fusion reactors , 2001 .
[22] H. Zohm. Edge localized modes (ELMs) , 1996 .
[23] G. Pautasso,et al. Energy flux to the ASDEX-Upgrade diverter plates determined by thermography and calorimetry , 1995 .
[24] F. Wagner,et al. Regime of Improved Confinement and High Beta in Neutral-Beam-Heated Divertor Discharges of the ASDEX Tokamak , 1982 .