A fast and simple numerical model for a deeply buried underground tunnel in heating and cooling applications

Underground tunnels used in underground constructions serve as huge ventilation pipes that conduct outside fresh air into a cavern. Predicting the heat and mass transfer is critically important in order to exploit the relatively constant underground soil temperature for heat transfer, and to ensure sufficient ventilation for occupational safety. This paper presents a numerical model developed to describe the simultaneous heat transfer between air and the tunnel surface, taking into account the condensation phenomena inside the tunnel. The soil surrounding the tunnel is treated as an equivalent long annulus and divided into several cross-section slices. With appropriate assumptions, a set of discrete numerical equations and its solution is proposed. The developed model is validated against field measurements which showed good agreement between the simulated results and measurement data. The model is then applied to an underground tunnel operating for a ten-year-period.

[1]  Olfa Kanoun,et al.  Investigation of the ground thermal potential in tunisia focused towards heating and cooling applications , 2010 .

[2]  Pierre Hollmuller,et al.  Cooling and preheating with buried pipe systems: monitoring, simulation and economic aspects , 2001 .

[3]  James W. Stevens Optimal placement depth for air–ground heat transfer systems , 2004 .

[4]  L. Montoro,et al.  A one-dimensional transient analytical model for earth-to-air heat exchangers, taking into account condensation phenomena and thermal perturbation from the upper free surface as well as around the buried pipes , 2008 .

[5]  G. Mihalakakou,et al.  On the coupling of thermostatically controlled buildings with ground and night ventilation passive dissipation techniques , 1997 .

[6]  N. K. Bansal,et al.  Temperature distribution inside ground for various surface conditions , 1981 .

[7]  Mehdi Maerefat,et al.  Passive cooling of buildings by using integrated earth to air heat exchanger and solar chimney , 2010 .

[8]  Athanassios A. Argiriou,et al.  Analysis of the accuracy and sensitivity of eight models to predict the performance of earth-to-air heat exchangers , 1992 .

[9]  Abel Rouboa,et al.  Compact buried pipes system analysis for indoor air conditioning , 2013 .

[10]  Shengwei Wang,et al.  Modelling and evaluation of cooling capacity of earth-air-pipe systems , 2007 .

[11]  D. N. Asimakopoulos,et al.  Parametric prediction of the buried pipes cooling potential for passive cooling applications , 1995 .

[12]  Shuichi Hokoi,et al.  Cooling effect of cool tube. Part 2: Thermal behavior of cool tube with moisture transfer , 1998 .

[13]  Moncef Krarti,et al.  ANALYTICAL MODEL FOR HEAT TRANSFER IN AN UNDERGROUND AIR TUNNEL , 1996 .

[14]  Hua Su,et al.  A numerical model of a deeply buried air–earth–tunnel heat exchanger , 2012 .

[15]  S. C. Kaushik,et al.  Performance evaluation and energy conservation potential of earth–air–tunnel system coupled with non-air-conditioned building , 2003 .

[16]  Jan Akander,et al.  Build-up and long-term performance test of a full-scale solar-assisted heat pump system for residential heating in Nordic climatic conditions , 2010 .