Modelling of the behaviour of gas–solid two-phase mixtures flowing through packed beds

Abstract This work is concerned about gas–solid two-phase mixtures flowing upwards through packed beds. An Eulerian-based two-fluid model coupled with a newly proposed porosity distribution model is used to simulate the flow behaviour. The results are compared with recently published experimental results in terms of both hydrodynamics and solids motion. It is found that the use of the newly proposed porosity model not only gives better agreement with experimental porosity data, but also provides a much better prediction of the pressure drop than other porosity models could do. The results also show that the model predicts very well the dynamic hold-up of suspended particles, and captures the main features of the radial distributions of the suspended solids concentration and the axial solids velocity. A discrepancy occurs, however, at the wall region where the predicted axial solids velocity peak is sharper and higher than the measurements. The work also leads to a new relationship for the pressure drop of dilute gas–solid two-phase mixtures flowing through packed beds, which agrees very well with experiments.

[1]  Lynn F. Gladden,et al.  Structure-flow correlations in packed beds , 1998 .

[2]  Yong Jin,et al.  Gas-solids circulating fluidization in a packed bed , 1995 .

[3]  Aibing Yu,et al.  Gas–powder flow and powder accumulation in a packed bed: II: Numerical study , 2004 .

[4]  L. Gladden.  Applications of in situ magnetic resonance techniques in chemical reaction engineering , 1999 .

[5]  Hiroshi Nogami,et al.  Numerical Investigation on Effects of Deadman Structure and Powder Properties on Gas and Powder Flows in Lower Part of Blast Furnace , 2004 .

[6]  Arno de Klerk,et al.  Voidage variation in packed beds at small column to particle diameter ratio , 2003 .

[7]  A. Neri,et al.  Riser hydrodynamics: Simulation using kinetic theory , 2000 .

[8]  Ulrich Renz,et al.  Eulerian simulation of bubble formation at a jet in a two-dimensional fluidized bed , 1997 .

[9]  Gary Edward Mueller,et al.  Radial void fraction distributions in randomly packed fixed beds of uniformly sized spheres in cylindrical containers , 1992 .

[10]  Paul Zulli,et al.  Numerical simulation of the gas-solid flow in a bed with lateral gas blasting , 2000 .

[11]  Milorad P. Dudukovic,et al.  CFD of multiphase flow in packed-bed reactors: II. Results and applications , 2002 .

[12]  Hiroshi Nogami,et al.  Numerical Investigation of Simultaneous Injection of Pulverized Coal and Natural Gas with Oxygen Enrichment to the Blast Furnace , 2002 .

[13]  Lynn F. Gladden,et al.  Structure of packed beds probed by Magnetic Resonance Imaging , 2001 .

[14]  S. Ergun.  Fluid flow through packed columns , 1952 .

[15]  D. Gidaspow.  Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions , 1994 .

[16]  Milorad P. Dudukovic,et al.  Single phase flow modeling in packed beds : discrete cell approach revisited , 2000 .

[17]  D. Jeffrey,et al.  Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfield , 1984, Journal of Fluid Mechanics.

[18]  Z P Zhang,et al.  Effect of packing method on the randomness of disc packings , 1996 .

[19]  He Yurong,et al.  Computer simulations of gas–solid flow in spouted beds using kinetic–frictional stress model of granular flow , 2004 .

[20]  H. Martin.  Low peclet number particle-to-fluid heat and mass transfer in packed beds , 1978 .

[21]  Gary Edward Mueller,et al.  Prediction of Radial Porosity Distributions in Randomly Packed Fixed Beds of Uniformly Sized Spheres in Cylindrical Containers , 1991 .

[22]  J. Yagi,et al.  One-dimensional Flow Characteristics of Gas-Powder Two Phase Flow in Packed Beds , 1991 .

[23]  Hideyuki Yamaoka.  Flow Characteristics of Gas and Fine Particles in a Two-dimensional Space of Packed Bed , 1986 .

[24]  Aibing Yu,et al.  Prediction of the Porosity of Particle Mixtures , 1998 .

[25]  Flow of a gas–solid two-phase mixture through a packed bed , 2004 .

[26]  Hiroshi Nogami,et al.  A Mathematical Model of Four Phase Motion and Heat Transfer in the Blast Furnace , 1997 .

[27]  Milorad P. Dudukovic,et al.  CFD of multiphase flow in packed‐bed reactors: I. k‐Fluid modeling issues , 2002 .

[28]  G. Eigenberger,et al.  Fluid flow through catalyst filled tubes , 1997 .

[29]  W. Prins,et al.  A small scale regularly packed circulating fluidized bed. Part I: Hydrodynamics. , 1994 .

[30]  Karl T. Chuang,et al.  CFD modeling of mass-transfer processes in randomly packed distillation columns , 2000 .

[31]  Katsuki Kusakabe,et al.  Flow of Fine Particles Entrained by Upward Gas Flow in Packed Beds of Coarse Particles , 1999 .

[32]  David Parker,et al.  Solids behaviour in a gas–solid two-phase mixture flowing through a packed particle bed , 2005 .

[33]  Jun-ichiro Yagi,et al.  Pressure Loss and Hold-up Powders for Gas-Powder Two Phase Flow in Packed Beds , 1991 .

[34]  Katsuki Kusakabe,et al.  Entrainment of fine particles with upward gas flow in a packed bed of coarse particles , 1998 .

[35]  Rajamani Krishna,et al.  Comparative analysis of CFD models of dense gas–solid systems , 2001 .

[36]  Yong Jin,et al.  Studies on gas–solid–solid circulating fluidized-bed reactors , 1999 .

[37]  A. B. Metzner,et al.  Wall effects in laminar flow of fluids through packed beds , 1981 .

[38]  Hydrodynamics of gas-solid two-phase mixtures flowing upward through packed beds , 2005 .

[39]  Aibing Yu,et al.  Gas–powder flow and powder accumulation in a packed bed: I. Experimental study , 2004 .

[40]  R. F. Benenati,et al.  Void fraction distribution in beds of spheres , 1962 .

[41]  Florian Huber,et al.  Numerical simulations of single phase reacting flows in randomly packed fixed-bed reactors and experimental validation , 2003 .

[42]  D. Gidaspow,et al.  A bubbling fluidization model using kinetic theory of granular flow , 1990 .