Elaboration of a microstructured inkjet-printed carbon electrochemical capacitor

Abstract Carbon-based micro-supercapacitors dedicated to energy storage in self-powered modules were fabricated with inkjet printing technology on silicon substrate. An ink was first prepared by mixing an activated carbon powder with a PTFE polymer binder in ethylene glycol stabilized with a surfactant then deposited by inkjet on patterned gold current collectors with the substrate heated at 140 °C in order to assure a good homogeneity. Electrochemical micro-capacitors with electrodes in an interdigital configuration were fabricated, and characterized using electrochemical techniques in 1 M Et4NBF4 propylene carbonate electrolyte. These micro-devices show an excellent capacitive behavior over a wide potential range of 2.5 V for a cell capacitance of 2.1 mF cm−2. The newly developed technology will allow the integration of the storage device as close as possible to the MEMS-based energy harvesting device, minimizing power losses through connections.

[1]  S. D. Jones,et al.  A microfabricated solid-state secondary Li battery , 1996 .

[2]  S. Beeby,et al.  Energy harvesting vibration sources for microsystems applications , 2006 .

[3]  J. Webster.  Encyclopedia of Medical Devices and Instrumentation , 1988 .

[4]  J. Bates.  Thin-Film Lithium and Lithium-Ion Batteries , 2000 .

[5]  A. Hollenkamp,et al.  Carbon properties and their role in supercapacitors , 2006 .

[6]  Young Soo Yoon,et al.  Solid-state thin-film supercapacitor with ruthenium oxide and solid electrolyte thin films , 2001 .

[7]  P. Taberna,et al.  Electrochemical Characteristics and Impedance Spectroscopy Studies of Carbon-Carbon Supercapacitors , 2003 .

[8]  Kun-Hong Lee,et al.  Flexible micro-supercapacitors , 2006 .

[9]  G. Barbastathis,et al.  Origami fabrication of nanostructured, three-dimensional devices: Electrochemical capacitors with carbon electrodes , 2006 .

[10]  Candace K. Chan,et al.  Printable thin film supercapacitors using single-walled carbon nanotubes. , 2009, Nano letters.

[11]  Xuyuan Chen,et al.  Fabrication and tests of a novel three dimensional micro supercapacitor , 2009 .

[12]  Y. Gogotsi,et al.  Materials for electrochemical capacitors. , 2008, Nature materials.

[13]  Gordon G. Wallace,et al.  The fabrication and characterization of inkjet-printed polyaniline nanoparticle films , 2008 .

[14]  J. Harb,et al.  Microscopic Nickel-Zinc Batteries for Use in Autonomous Microsystems , 2001 .

[15]  I. R. Hill,et al.  Performance of experimental carbon blacks in aqueous supercapacitors , 2005 .

[16]  Ji Yoon Kang,et al.  Micropower for Medical Applications , 2006 .

[17]  Srinivasan Sampath,et al.  Hydrogel-polymer electrolytes for electrochemical capacitors: an overview , 2009 .

[18]  Daniel J. Inman,et al.  Recharging Batteries using Energy Harvested from Thermal Gradients , 2007 .

[19]  John R. Miller,et al.  Electrochemical Capacitors for Energy Management , 2008, Science.

[20]  Young Soo Yoon,et al.  All solid-state rechargeable thin-film microsupercapacitor fabricated with tungsten cosputtered ruthenium oxide electrodes , 2003 .

[21]  Li Yang,et al.  RFID Tag and RF Structures on a Paper Substrate Using Inkjet-Printing Technology , 2007, IEEE Transactions on Microwave Theory and Techniques.

[22]  P. Soudan,et al.  Electrochemical Properties of Ruthenium-Based Nanocrystalline Materials as Electrodes for Supercapacitors , 2002 .

[23]  John D. Perkins,et al.  Direct-write inkjet printing for fabrication of barium strontium titanate-based tunable circuits , 2007 .

[24]  B. Conway,et al.  Diagnostic analyses for mechanisms of self-discharge of electrochemical capacitors and batteries , 1997 .