Air voids size distribution determined by ultrasonic attenuation

Abstract Voids in cement-based materials influence their material properties. While air voids within a certain range are beneficial for freezing-and-thawing resistance, large-size voids decreases strength and durability. This paper proposes a method to quantify the air voids size distribution, which use the concept of ultrasonic wave attenuation. The wave attenuation increases with the inclusion of air voids. Its measurement is compared with a theoretical model, and then three-dimensional information of air voids can be obtained. An application example of cement paste is presented and the results are discussed with the measurement of permeable pores and the result of a microscopical determination.

[1]  Robert Kenneth Roney.  The influence of metal grain structure on the attenuation of an ultrasonic acoustic wave , 1950 .

[2]  R. L. Smith,et al.  The effect of grain size distribution on the frequency dependence of the ultrasonic attenuation in polycrystalline materials , 1982 .

[3]  Jae Hong Kim,et al.  Nondestructive Evaluation of Elastic Properties of Concrete Using Simulation of Surface Waves , 2008, Comput. Aided Civ. Infrastructure Eng..

[4]  J. Bonnet,et al.  Ultrasonic assessment of Portland cement at the early stages of hydration , 1999 .

[5]  Christina James,et al.  A statistical approach to estimate the 3D size distribution of spheres from 2D size distributions , 2005 .

[6]  P. Tortoli,et al.  An analogue Hilbert transformer for complex waveform detection , 1983 .

[7]  Shiro Biwa,et al.  Independent scattering and wave attenuation in viscoelastic composites , 2001 .

[8]  Kevin J. Folliard,et al.  Mechanisms of Air Entrainment in Concrete , 2005 .

[9]  Emmanuel P. Papadakis,et al.  Revised Grain‐Scattering Formulas and Tables , 1964 .

[10]  Laurence J. Jacobs,et al.  Characterization of Multi-scale Porosity in Cement Paste by Advanced Ultrasonic Techniques , 2007 .

[11]  Hyo-Gyoung Kwak,et al.  Characterization of thermally damaged concrete using a nonlinear ultrasonic method , 2012 .

[12]  Emmanuel P. Papadakis,et al.  Grain‐Size Distribution in Metals and Its Influence on Ultrasonic Attenuation Measurements , 1961 .

[13]  Laurence J. Jacobs,et al.  Characterization of entrained air voids in cement paste with scattered ultrasound , 2006 .

[14]  Hyo-Gyoung Kwak,et al.  Wave attenuation measurement technique for nondestructive evaluation of concrete , 2012 .

[15]  A. Neville.  Properties of Concrete , 1968 .

[16]  K. Aligizaki.  Pore Structure of Cement-Based Materials: Testing, Interpretation and Requirements , 2005 .

[17]  Hyo-Gyoung Kwak,et al.  Characterization of the crack depth in concrete using self-compensating frequency response function , 2010 .

[18]  K. A. Snyder,et al.  A Numerical Test of Air Void Spacing Equations , 1998 .