Tensile Properties of Melt-Extracted and Annealed Ni/Fe-Based Amorphous Metallic Fibers

Here, melt-extracted Ni- and Fe-based amorphous metallic fibers (AMFs) were annealed below their glass transition temperatures. The tensile behaviors and microstructures of the melt-extracted and the annealed AMF samples were studied. For melt-extracted Ni- and Fe-based samples, the difference of fracture angles can be attributed to their difference of parameter α in the unified tensile fracture criterion. The revolution in the microstructure and mechanical properties induced by annealing treatment has been interpreted in detail. Prolonging the annealing time or increasing the annealing temperature can lead to an increase in fracture stresses of both Ni- and Fe-based AMFs. It was demonstrated that the increase in the fracture stresses of annealed AMFs is caused by the free volume annihilation in annealing processing.

[1]  Zhonglue Hu,et al.  Review of Thermoplastic Drawing with Bulk Metallic Glasses , 2022, Metals.

[2]  N. Volkov,et al.  The Effect of Free Volume on the Crystallization of Al87Ni8Gd5 Amorphous Alloy , 2022, Metals.

[3]  B. Shen,et al.  Rejuvenation-to-Relaxation Transition Induced by Elastostatic Compression and Its Effect on Deformation Behavior in a Zr-Based Bulk Metallic Glass , 2022, Metals.

[4]  V. Zadorozhnyy,et al.  Review of the Recent Development in Metallic Glass and Its Composites , 2021, Metals.

[5]  Yongjiang Huang,et al.  Effect of strain rate on fracture reliability of Cu45Zr45Co10 amorphous alloy microwires by statistical analyses , 2021, Journal of Alloys and Compounds.

[6]  R. Liu,et al.  Enhancement of Magnetic and Tensile Mechanical Performances in Fe-Based Metallic Microwires Induced by Trace Ni-Doping , 2021, Materials.

[7]  S. Ostendorp,et al.  A comparison of in- and ex situ generated shear bands in metallic glass by transmission electron microscopy , 2021, 2106.12986.

[8]  Kehong Wang,et al.  Thermoplastic brazing of TiAl- and Ni-based alloys utilizing a Ni-based bulk metallic glass as the filler metal , 2021 .

[9]  M. Zhang,et al.  Fatigue Behavior of Zr58Cu15.46Ni12.74Al10.34Nb2.76Y0.5 Bulk Metallic Glass Fabricated by Industrial-Grade Zirconium Raw Material , 2021 .

[10]  Hongxian Shen,et al.  Comparative study of tensile properties and magnetic properties for Nb-doped Fe-based wires , 2020 .

[11]  S. Scudino,et al.  Effect of heat treatment on microstructure and mechanical properties of Al 2024 matrix composites reinforced with Ni60Nb40 metallic glass particles , 2019, Journal of Alloys and Compounds.

[12]  Qixiang Wang,et al.  Enhanced Tensile Properties and Fracture Reliability of Cu‐Based Amorphous Wires via Pr‐Doping , 2018 .

[13]  Z. Ning,et al.  Bending behavior of as-cast and annealed ZrCuNiAl bulk metallic glass , 2017 .

[14]  S. H. Chen,et al.  Enhanced mechanical properties of Ni 62 Nb 38 bulk metallic glasses by Ta substitution , 2017 .

[15]  Hongxian Shen,et al.  Improving mechanical and magnetocaloric responses of amorphous melt-extracted Gd-based microwires via nanocrystallization , 2017 .

[16]  G. Q. Yue,et al.  Local structure order in Pd78Cu6Si16 liquid , 2015, Scientific Reports.

[17]  W. Wang,et al.  The dependence of shear modulus on dynamic relaxation and evolution of local structural heterogeneity in a metallic glass , 2013 .

[18]  X. Xue,et al.  Enhancing GMI properties of melt-extracted Co-based amorphous wires by twin-zone Joule annealing , 2012 .

[19]  H. Fan,et al.  Ductile Ti-based metallic glass spheres , 2012 .

[20]  Hua-Xin Peng,et al.  Relating residual stress and microstructure to mechanical and giant magneto-impedance properties in cold-drawn Co-based amorphous microwires , 2012 .

[21]  Weihua Wang.  The elastic properties, elastic models and elastic perspectives of metallic glasses , 2012 .

[22]  Yuan Wu,et al.  Effects of drawing on the tensile fracture strength and its reliability of small-sized metallic glasses , 2010 .

[23]  X. Jianxin.  Influence of annealing on the magnetic and mechanical properties of glass-coated Fe_(69)Co_(10)Si_8B_(13) microwires , 2010 .

[24]  P. Uggowitzer,et al.  Tensile properties of glassy MgZnCa wires and reliability analysis using Weibull statistics , 2009 .

[25]  M. Morrison,et al.  Structural changes in bulk metallic glass after annealing below the glass-transition temperature , 2007 .

[26]  F. Spaepen.  Homogeneous flow of metallic glasses: A free volume perspective , 2006 .

[27]  P. Murali,et al.  Embrittlement of a bulk metallic glass due to sub-Tg annealing , 2005 .

[28]  Weihua Wang,et al.  Intrinsic plasticity or brittleness of metallic glasses , 2005 .

[29]  Wooju Kim,et al.  Fabrication of Ni-Nb-Ta metallic glass reinforced Al-based alloy matrix composites by infiltration casting process , 2004 .

[30]  C. Liu,et al.  Role of yttrium in glass formation of Fe-based bulk metallic glasses , 2003 .

[31]  F. Spaepen,et al.  The kinetics of structural relaxation of a metallic glass , 1980 .