论文信息 - Micro-Indentation of Aluminum Processed by Equal Channel Angular Extrusion

Micro-Indentation of Aluminum Processed by Equal Channel Angular Extrusion

The near-surface deformation of equal-channel angular extruded (ECAE) pure aluminum was investigated using the micro-indentation technique. Compared with fully annealed Al samples, there is a distinguishable difference inthe indentation deformation. The unloading slope of the ECAE deformed Al after a short unloading period was found to be less than that of the annealed samples due to plastic recovery. Work hardening was observed, which depended on the history of local deformation. A new relationship between the plastic energy dissipated in the indentation and the applied load was derived, which is supported by the experimental results.

K. Okazaki | Fuqian Yang | Lingling Peng

[1] D. G. Morris,et al. Mechanical behaviour of dilute Al-Mg alloy processed by equal channel angular pressing , 2003 .

[2] T. Langdon,et al. Influence of scandium and zirconium on grain stability and superplastic ductilities in ultrafine-grained Al-Mg alloys , 2002 .

[3] P. Prangnell,et al. The effect of strain path on the development of deformation structures in severely deformed aluminium alloys processed by ECAE , 2000 .

[4] R. Valiev,et al. Bulk nanostructured materials from severe plastic deformation , 2000 .

[5] Terence G. Langdon,et al. The process of grain refinement in equal-channel angular pressing , 1998 .

[6] Ruslan Z. Valiev,et al. Deformation behaviour of ultra-fine-grained copper , 1994 .

[7] W. Zieliński,et al. Microscopy and microindentation mechanics of single crystal Fe−3 wt. % Si: Part II. TEM of the indentation plastic zone , 1993 .

[8] G. Pharr,et al. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[9] H. Kurishita,et al. Dislocation Density and Internal Stress in an Al-5.7 at%Mg Alloy , 1985 .