Position Sensorless Control of Synchronous Reluctance Motors at Low-Speeds

Synchronous reluctance motors (SynRMs) have attracted much attention because they do not require magnets. Position sensorless control of SynRMs at low speeds is necessary, and several methods have been proposed in this regard. A new position sensorless control method for SynRMs operating in the very low-speed region is proposed. This approach superimposes a high-frequency current with a small and constant amplitude and a constant frequency to the torque current for driving the SynRMs, by using a high-frequency current control system. It has been shown that robust position sensorless control against inductance variations can be realized using this proposed method. In the position sensorless control method based on a superimposing signal, the current should be small. Therefore, in this paper, the capability of the presented approach to achieve a minimum constant amplitude of the high-frequency current is investigated. The experimental results indicate that the proposed method is a feasible one as position sensorless control of SynRMs in very-low speed region even if the superimposed current has a minimum constant amplitude.

[1]  Equal-loudness-level contours of older adults measured by magnitude estimation method: A preliminary study , 2009 .

[2]  R.E. Betz,et al.  Sensorless vector controller for a synchronous reluctance motor , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[3]  Shigeru Okuma,et al.  A new flux-barrier-type reluctance motor with a slit rotor , 1999, IEEE Trans. Ind. Electron..

[4]  Shinji Doki,et al.  Position sensorless control of synchronous reluctance motors at very low speeds region using high-frequency current control system , 2017, 2017 20th International Conference on Electrical Machines and Systems (ICEMS).

[5]  N. Gopalakrishnan,et al.  Optimal design and comparative analysis of different configurations of brushless doubly fed reluctance machine , 2016, 2016 19th International Conference on Electrical Machines and Systems (ICEMS).

[6]  Seung-Ki Sul,et al.  Analysis of permanent-magnet machine for sensorless control based on high-frequency signal injection , 2004, IEEE Transactions on Industry Applications.

[7]  N. Matsui,et al.  Design of saliency-based sensorless drive IPM motors for hybrid electric vehicles , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[8]  Shinji Doki,et al.  Robust Position Sensorless Control Against Inductance Variations of Synchronous Reluctance Motors in Low-Speed Region Using High-frequency Current Control , 2018, 2018 XIII International Conference on Electrical Machines (ICEM).

[9]  Shinji Doki,et al.  Adjusted current controller for signal-injection based control algorithms , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[10]  Silverio Bolognani,et al.  Model Sensitivity of Fundamental-Frequency-Based Position Estimators for Sensorless PM and Reluctance Synchronous Motor Drives , 2018, IEEE Transactions on Industrial Electronics.

[11]  Shigeru Okuma,et al.  An extended electromotive force model for sensorless control of interior permanent-magnet synchronous motors , 2003, IEEE Trans. Ind. Electron..

[12]  Keisuke Matsuo,et al.  Comparison study of various motors for EVs and the potentiality of a ferrite magnet motor , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

[13]  A. Piippo,et al.  Adaptation of Motor Parameters in Sensorless PMSM Drives , 2007, IEEE Transactions on Industry Applications.

[14]  R. D. Lorenz,et al.  Rotor position and velocity estimation for a salient-pole permanent magnet synchronous machine at standstill and high speeds , 1998 .

[15]  Fumiharu Fujiwara,et al.  Extended EMF Models of Synchronous Reluctance Motors and Selection of Main Flux Direction , 2003 .

[16]  Yu-Liang Hsu,et al.  Full Speed Region Sensorless Drive of Permanent-Magnet Machine Combining Saliency-Based and Back-EMF-Based Drive , 2017, IEEE Transactions on Industrial Electronics.

[17]  Nicola Bianchi,et al.  Finite-Element Analysis of Electrical Machines for Sensorless Drives With High-Frequency Signal Injection , 2014, IEEE Transactions on Industry Applications.

[18]  Cedric Caruana,et al.  A Review of Saliency-based Sensorless Control Methods for Alternating Current Machines , 2014 .

[19]  Seung-Ki Sul,et al.  Sensorless Control of IPMSM: Past, Present, and Future , 2012 .

[20]  Kozo Ide,et al.  Application Trends of Sensorless AC Motor Drives in Europe , 2014 .

[21]  Toni Tuovinen,et al.  Adaptive full-order observer with high-frequency signal injection for synchronous reluctance motor drives , 2014, 2013 International Electric Machines & Drives Conference.

[22]  Gianmario Pellegrino,et al.  End Effects in Linear Tubular Motors and Compensated Position Sensorless Control Based on Pulsating Voltage Injection , 2011, IEEE Transactions on Industrial Electronics.