Experimental and numerical study on phase change material (PCM) for thermal management of mobile devices

Abstract As mobile devices become more complex and higher in performance despite the smaller size, heat concentration at localized areas has become a problem. In recent years, passive cooling using phase change materials (PCMs) has drawn attention as a thermal management method for mobile devices. PCMs reduce the temperature increase rate due to their latent heat properties. This reduction in the temperature increase rate is called a “delay effect”. Moreover, microencapsulated PCMs (MPCMs) are attracting attention because they keep the melted PCMs from leaking. In this study, PCM sheets containing MPCM/polyethylene composite material are investigated for the thermal management of mobile devices. Namely the authors conduct a series of experiments using the PCM sheet with a high thermal conductivity sheet mounted into a simply modeled mobile device. Effects of the mass, the latent heat, the thermal conductivity, the configuration of the PCM sheet, and high thermal conductivity sheet on the temperature of a smart phone simulator are investigated. A finite element analysis (FEA) is also conducted considering the phase change of PCMs to investigate the optimal dimension and shape of PCMs. As a result, the delay effect of PCMs and the effectivity of a copper sheet pasted on the PCMs are verified by experiments. Moreover, FEA shows that using the PCM sheet with high thermal conductivity sheet has an advantage for the thermal management of mobile devices and gives an optimal condition for the PCM sheets.

[1]  F. L. Tan,et al.  Cooling of mobile electronic devices using phase change materials , 2004 .

[2]  Jun Zhang,et al.  Experimental study on the thermal characteristics of a microencapsulated phase-change composite plate , 2014 .

[3]  Yucheng He,et al.  Experimental study of a passive thermal management system for high-powered lithium ion batteries using porous metal foam saturated with phase change materials , 2014 .

[4]  Hye-jung Cho,et al.  System thermal analysis for mobile phone , 2008 .

[5]  J. Su,et al.  Preparation and mechanical properties of thermal energy storage microcapsules , 2005 .

[6]  John B. Shoven,et al.  I , Edinburgh Medical and Surgical Journal.

[7]  Sai Cheong Fok,et al.  Experimental studies on the use of a phase change material for cooling mobile phones , 2010 .

[8]  Said Al-Hallaj,et al.  An alternative cooling system to enhance the safety of Li-ion battery packs , 2009 .

[9]  Lei Wang,et al.  Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules , 2014 .

[10]  Yajuan Zhong,et al.  Thermal conductivity enhancement of form-stable phase-change composites by milling of expanded graphite, micro-capsules and polyethylene , 2013 .

[11]  Raya Al-Dadah,et al.  Experimental investigation of inserts configurations and PCM type on the thermal performance of PCM based heat sinks , 2013 .

[12]  Xiaoyan Yuan,et al.  Thermal conductivity of microPCMs-filled epoxy matrix composites , 2011 .

[13]  J. Su,et al.  Mechanical properties and thermal stability of double‐shell thermal‐energy‐storage microcapsules , 2007 .

[14]  F. Tan,et al.  Cooling of portable hand-held electronic devices using phase change materials in finned heat sinks , 2010 .

[15]  P. Xue,et al.  Micro-encapsulated paraffin/high-density polyethylene/wood flour composite as form-stable phase change material for thermal energy storage , 2009 .

[16]  Arun S. Mujumdar,et al.  Application of phase change materials in thermal management of electronics , 2007 .

[17]  J. Su,et al.  Fabrication and interfacial morphologies of methanol–melamine–formaldehyde (MMF) shell microPCMs/epoxy composites , 2011 .

[18]  S. Nakagawa,et al.  Study on the Enhancement of Natural Air Cooling Capability in the Vertical Channel Model of Compact Electronic Equipment : The Effect of the Clearance of a Channel on the Natural Cooling Capability(Thermal Engineering) , 2009 .

[19]  W. Tao,et al.  Passive thermal management using metal foam saturated with phase change material in a heat sink , 2012 .

[20]  Bojana Boh,et al.  Thermal properties of phase-change materials based on high-density polyethylene filled with micro-encapsulated paraffin wax for thermal energy storage , 2015 .

[21]  Y. Shinki,et al.  G112 The Thermal Design for Mobile Phones by Using Thermal Simulation System , 2007 .

[22]  H. Soeda,et al.  437 Unsteady Heat Conduction of Composite Materials of Micro Encapsulated Phase Change Materials (MEPCM) : Comparison of Experiment and Numerical Simulation , 2009 .

[23]  F. L. Tan,et al.  Experimental and numerical studies on performance of PCM-based heat sink with different configurations of internal fins , 2011 .

[24]  Arun S. Mujumdar,et al.  Transient cooling of electronics using phase change material (PCM)-based heat sinks , 2008 .

[25]  Cristina H. Amon,et al.  PCM thermal control unit for portable electronic devices: experimental and numerical studies , 2003 .

[26]  Guido Sassi,et al.  Characterization of panels containing micro-encapsulated Phase Change Materials , 2013 .

[27]  Edition , 2018, Xenophanes von Kolophon.