A Review of Variable Valve Timing Benefits and Modes of Operation

[1]  Keiichi Maekawa,et al.  Development of a Valve Timing Control System , 1989 .

[2]  Seinosuke Hara,et al.  Application of a Valve Lift and Timing Control System to an Automotive Engine , 1989 .

[3]  Hans Peter Lenz,et al.  Variable Valve Timing-A Possibility to Control Engine load without Throttle , 1988 .

[4]  G. B. Kirby Meacham,et al.  Variable Cam Timing as an Emission Control Tool , 1970 .

[5]  Hans Peter Lenz,et al.  Initial Test Results of an Electro-Hydraulic variable-Valve Actuation System on a Firing Engine , 1989 .

[6]  Thomas Dresner,et al.  A Review and Classification of Variable Valve Timing Mechanisms , 1989 .

[7]  K. N. Mistry,et al.  Variable Valve Timing for Fuel Economy Improvement — The Mitchell System , 1988 .

[8]  T. Ma,et al.  Recent Advances in Variable Valve Timing , 1987 .

[9]  A. H. Seilly.  HELENOID ACTUATORS--A NEW CONCEPT IN EXTREMELY FAST ACTING SOLENOIDS , 1979 .

[10]  Noriyuki Kishi,et al.  A High Power, Wide Torque Range, Efficient Engine with a Newly Developed Variablea-Valve-Lift and -Timing Mechanism , 1989 .

[11]  J. M. Dosdall,et al.  Variable Displacement by Engine Valve Control , 1978 .

[12]  W. R. Delameter,et al.  A Variable-Displacement Spark-Ignition Engine , 1977 .

[13]  Thomas Dresner,et al.  The application of a two-input cam-actuated mechanism to variable valve timing , 1989 .

[14]  Eric Kwan,et al.  Variable Valve Actuation Mechanisms and the Potential for their Application , 1989 .

[15]  José M. Corberán,et al.  A Study of the Performance of a SI Engine Incorporating a Hydraulically Controlled Variable Valve Timing System , 1988 .

[16]  Fujio Nagao,et al.  Valve Timing Control by a Hydraulic Tappet with a Leak Hole , 1968 .

[17]  J. E. Bennethum,et al.  Design and Development of a Variable Valve Timing (VVT) Camshaft , 1974 .

[18]  R. J. Saunders,et al.  Variable Valve Closure Timing for Load Control and the Otto Atkinson Cycle Engine , 1989 .

[19]  James Tuttle,et al.  CONTROLLING ENGINE LOAD BY MEANS OF LATE INTAKE-VALVE CLOSING , 1980 .

[20]  Max Allen Freeman,et al.  Valve Timing for Control of Oxides of Nitrogen (NOx) , 1972 .

[21]  R. M. Siewert,et al.  How Individual Valve Timing Events Affect Exhaust Emissions , 1971 .

[22]  Fujio Nagao,et al.  Relation between Inlet Valve Closing Angle and Volumetric Efficiency of a Four-Stroke Engine , 1969 .

[23]  A. C. Elrod,et al.  Development of a Variable Valve Timed Engine to Eliminate the Pumping Losses Associated with Throttled Operation , 1986 .

[24]  Donald L. Stivender,et al.  Engine Air Control- Basis of a Vehicular Systems Control Hierarchy , 1978 .

[25]  J. E. Mardell,et al.  An Integrated, Full Authority, Electrohydraulic Engine Valve and Diesel Fuel injection System , 1988 .

[26]  J. M. Novak,et al.  PARAMETRIC SIMULATION OF SIGNIFICANT DESIGN AND OPERATING ALTERNATIVES AFFECTING THE FUEL ECONOMY AND EMISSIONS OF SPARK-IGNITED ENGINES , 1978 .

[27]  Donald L. Stivender,et al.  Intake Valve Throttling (IVT) - A Sonic Throttling Intake Valve Engine , 1968 .

[28]  Ronald J. Herrin,et al.  A Lost-Motion, Variable-Valve-Timing System for Automotive Piston Engines , 1984 .

[29]  Fujio Nagao,et al.  Relation between Valve Angle-Area and Low Speed Performance of a Uniflow-Scavenged Engine , 1968 .