A reference electrode based on polyvinyl butyral (PVB) polymer for decentralized chemical measurements.

[1]  Anja Walter,et al.  Principles Of Chemical Sensors , 2016 .

[2]  Joseph Wang,et al.  Epidermal tattoo potentiometric sodium sensors with wireless signal transduction for continuous non-invasive sweat monitoring. , 2014, Biosensors & bioelectronics.

[3]  J. Windmiller,et al.  A potentiometric tattoo sensor for monitoring ammonium in sweat. , 2013, The Analyst.

[4]  F. Rius,et al.  Potentiometric sensors using cotton yarns, carbon nanotubes and polymeric membranes. , 2013, The Analyst.

[5]  A. Lewenstam,et al.  An analytical quality solid-state composite reference electrode. , 2013, The Analyst.

[6]  K. Kubota,et al.  Evaluation of interactive effects on the ionic conduction properties of polymer gel electrolytes. , 2012, The journal of physical chemistry. B.

[7]  A. Michalska All‐Solid‐State Ion Selective and All‐Solid‐State Reference Electrodes , 2012 .

[8]  F. Rius,et al.  Paper-based ion-selective potentiometric sensors. , 2012, Analytical chemistry.

[9]  Jinwei Wang,et al.  Fabrication of honeycomb polyvinyl butyral film under humidity provided by super saturated salt solutions , 2012 .

[10]  N. Chaniotakis,et al.  Carbon-nanofiber-based nanocomposite membrane as a highly stable solid-state junction for reference electrodes. , 2011, Analytical chemistry.

[11]  Jordi Riu,et al.  Disposable planar reference electrode based on carbon nanotubes and polyacrylate membrane. , 2011, Analytical chemistry.

[12]  D. Lubasová,et al.  Controlled Morphology of Porous Polyvinyl Butyral Nanofibers , 2011 .

[13]  J. Riu,et al.  Solid-state reference electrodes based on carbon nanotubes and polyacrylate membranes , 2011, Analytical and bioanalytical chemistry.

[14]  Sejin Park,et al.  Nanoporous platinum solid-state reference electrode with layer-by-layer polyelectrolyte junction for pH sensing chip. , 2011, Lab on a chip.

[15]  A. Kisiel,et al.  Polyacrylate microspheres composite for all-solid-state reference electrodes. , 2010, The Analyst.

[16]  U. Guth,et al.  An all-solid-state reference electrode , 2010 .

[17]  Yu Qin,et al.  Preparation of all solid-state potentiometric ion sensors with polymer-CNT composites , 2009 .

[18]  F. Rius,et al.  Transduction mechanism of carbon nanotubes in solid-contact ion-selective electrodes. , 2009, Analytical chemistry.

[19]  U. Guth,et al.  Solid-state reference electrodes for potentiometric sensors , 2009 .

[20]  E. Hall,et al.  All‐Solid‐State Reference Electrodes with Poly(n‐butyl acrylate) Based Membranes , 2008 .

[21]  F. Rius,et al.  Ion-selective electrodes using carbon nanotubes as ion-to-electron transducers. , 2008, Analytical chemistry.

[22]  Mi-Sook Won,et al.  An all-solid-state reference electrode based on the layer-by-layer polymer coating. , 2007, The Analyst.

[23]  D. Diamond,et al.  Chemo/bio-sensor networks , 2006, Nature materials.

[24]  Artur Dybko,et al.  All-solid-state miniaturised planar reference electrodes based on ionic liquids , 2006 .

[25]  Tse-Chuan Chou,et al.  Fabrication of a planar-form screen-printed solid electrolyte modified Ag/AgCl reference electrode for application in a potentiometric biosensor. , 2006, Analytical chemistry.

[26]  D. Tang,et al.  Direct and Rapid Detection of Diphtherotoxin via Potentiometric Immunosensor Based on Nanoparticles Mixture and Polyvinyl Butyral as Matrixes , 2005 .

[27]  Xiaofeng Lu,et al.  Preparation and hydrophilicity study of poly(vinyl butyral)-based ultrafiltration membranes , 2005 .

[28]  Gabriela Valdés-Ramírez,et al.  Composites: A novel alternative to construct solid state Ag/AgCl reference electrodes , 2005 .

[29]  Y. Chai,et al.  Potentiometric Immunosensor Based on Immobilization of Hepatitis B Surface Antibody on Platinum Electrode Modified Silver Colloids and Polyvinyl Butyral as Matrixes , 2005 .

[30]  Yan Liu,et al.  Electrochemical characteristics of a platinum electrode modified with a matrix of polyvinyl butyral and colloidal Ag containing immobilized horseradish peroxidase , 2005, Analytical and bioanalytical chemistry.

[31]  Yan Liu,et al.  A novel immunosensor based on immobilization of hepatitis B surface antibody on platinum electrode modified colloidal gold and polyvinyl butyral as matrices via electrochemical impedance spectroscopy. , 2004, Bioelectrochemistry.

[32]  Y. Chai,et al.  Novel potentiometry immunoassay with amplified sensitivity for diphtheria antigen based on Nafion, colloidal Ag and polyvinyl butyral as matrixes. , 2004, Journal of biochemical and biophysical methods.

[33]  Robert Koncki,et al.  Screen-printed reference electrodes for potentiometric measurements , 2004 .

[34]  Ernö Pretsch,et al.  Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range , 2004 .

[35]  Ernö Pretsch,et al.  A polypyrrole-based solid-contact Pb2+-selective PVC-membrane electrode with a nanomolar detection limit , 2004, Analytical and bioanalytical chemistry.

[36]  H. Lobo,et al.  Handbook of Plastics Analysis , 2003 .

[37]  R. Hoffmann,et al.  Electronic properties of the silver-silver chloride cluster interface. , 2002, Chemistry.

[38]  Timothy D. Strong,et al.  Solid-state ion sensors with a liquid junction-free polymer membrane-based reference electrode for blood analysis , 2000 .

[39]  M. S. Hanra,et al.  Studies on fouling and gel polarisation aspects of polyvinyl butyral blended cellulose acetate ultrafiltration membrane by resistance model approach , 2000 .

[40]  Isao Karube,et al.  Microfabricated Liquid Junction Ag/AgCl Reference Electrode and Its Application to a One-Chip Potentiometric Sensor , 1999 .

[41]  A. Michalska,et al.  All-Solid-State Potentiometric Sensors for Potassium and Sodium Based on Poly(pyrrole) Solid Contact , 1997 .

[42]  R. Ramchandran,et al.  Polyvinyl butyral based solid polymeric electrolytes: Preliminary studies , 1997 .

[43]  S. A. Agnihotry,et al.  Ionic conductivity in poly(vinyl butyral) based polymeric electrolytes: Effect of solvents and salts , 1996 .

[44]  Dermot Diamond,et al.  All-solid-state sodium-selective electrode based on a calixarene ionophore in a poly(vinyl chloride) membrane with a polypyrrole solid contact , 1992 .

[45]  J. R.,et al.  Chemistry , 1929, Nature.