Parametric study and numerical analysis of empty and foam-filled thin-walled tubes under static and dynamic loadings

Abstract In this paper the crushing behavior of thin-walled tubes under static and dynamic loading is investigated. First, a finite element (FE) model for empty thin-walled tube was constructed and validated by available experimental and numerical data. The comparison between the FE results and the existing numerical solutions as well as the available experimental results showed good agreements. Next, a model for the foam was adopted and implemented in an in-house FE code. The implemented isotropic foam model was then used to simulate the behavior of foam-filled tubes under both static and dynamic loadings. Good agreement was observed between the results from the model with those obtained by analytical relations and experimental test data. The validated FE model was then used to conduct a series of parametric studies on foam-filled tapered tubes under static and dynamic loadings. The parametric studies were carried out to determine the effect of different parameters such as the number of oblique sides, foam density and boundary conditions on crushing behavior of rectangular tubes. The characteristic included deformed shapes, load–displacement, fold length and specific energy absorptions.

[1]  S. Reid,et al.  Static and dynamic crushing of tapered sheet metal tubes of rectangular cross-section , 1986 .

[2]  Tomasz Wierzbicki,et al.  Crash behavior of box columns filled with aluminum honeycomb or foam , 1998 .

[3]  A. G Mamalis,et al.  The quasi-static crumpling of thin-walled circular cylinders and frusta under axial compression , 1983 .

[4]  Norman Jones,et al.  Dynamic buckling of elastic–plastic square tubes under axial impact—II: structural response , 2004 .

[5]  A. G. Mamalis,et al.  Finite element simulation of the axial collapse of thin-wall square frusta , 2000 .

[6]  Hongwei Song,et al.  Partition Energy Absorption of Axially Crushed Aluminum Foam-Filled Hat Sections , 2005 .

[7]  David P. Thambiratnam,et al.  A numerical study on the impact response and energy absorption of tapered thin-walled tubes , 2004 .

[8]  Vikram Deshpande,et al.  Multi-axial yield behaviour of polymer foams , 2001 .

[9]  T. Wierzbicki,et al.  On the Crushing Mechanics of Thin-Walled Structures , 1983 .

[10]  M. Langseth,et al.  Static crushing of square aluminium extrusions with aluminium foam filler , 1999 .

[11]  S. Reid,et al.  Static and dynamic axial crushing of foam-filled sheet metal tubes , 1986 .

[12]  D. Thambiratnam,et al.  Dynamic simulation and energy absorption of tapered thin-walled tubes under oblique impact loading , 2006 .

[13]  O. Hopperstad,et al.  Crashworthiness of aluminium extrusions: validation of numerical simulation, effect of mass ratio and impact velocity , 1999 .

[14]  Norman Jones,et al.  Dynamic progressive buckling of circular and square tubes , 1986 .

[15]  Abdulmalik A. Alghamdi,et al.  Reinversion of aluminium frustra , 2002 .

[16]  Odd Sture Hopperstad,et al.  Design of aluminium foam-filled crash boxes of square and circular cross-sections , 2001 .

[17]  Michael F. Ashby,et al.  The mechanical properties of cellular solids , 1983 .

[18]  G. L. Viegelahn,et al.  The crumpling of steel thin-walled tubes and frusta under axial compression at elevated strain-rates: Some experimental results , 1984 .

[19]  Vistasp M. Karbhari,et al.  Energy absorbing characteristics of circular frustra , 2003 .

[20]  A. A. A. Alghamdi,et al.  Folding-crumpling of thin-walled aluminium frusta , 2002 .

[21]  Dimitrios E. Manolakos,et al.  Experimental determination of splitting in axially collapsed thick-walled fibre-reinforced composite frusta , 1997 .

[22]  Abdulmalik A. Alghamdi,et al.  Modes of axial collapse of unconstrained capped frusta , 2002 .

[23]  O. Hopperstad,et al.  Optimum design for energy absorption of square aluminium columns with aluminium foam filler , 2001 .

[24]  M. Langseth,et al.  Bending of square aluminium extrusions with aluminium foam filler , 2000 .

[25]  T. Y. Reddy,et al.  Axial compression of foam-filled thin-walled circular tubes , 1988 .

[26]  A. Toksoy,et al.  Quasi-static axial crushing of extruded polystyrene foam-filled thin-walled aluminum tubes: Experimental and numerical analysis , 2006 .

[27]  Athanasios G. Mamalis,et al.  Extensible plastic collapse of thin-wall frusta as energy absorbers , 1986 .

[28]  O. Hopperstad,et al.  Static and dynamic crushing of square aluminium extrusions with aluminium foam filler , 2000 .

[29]  W. Abramowicz,et al.  Axial crushing of foam-filled columns , 1988 .

[30]  H E Postlethwaite,et al.  Use of collapsible structural elements as impact isolators, with special references to automotive applications , 1970 .

[31]  Stephen R Reid,et al.  Axial crushing of foam-filled tapered sheet metal tubes , 1986 .

[32]  Athanasios G. Mamalis,et al.  On the inextensional axial collapse of thin PVC conical shells , 1986 .

[33]  W. Abramowicz,et al.  Dynamic axial crushing of square tubes , 1984 .

[34]  A. A. Singace,et al.  Influence of end constraints on the collapse of axially impacted frusta , 2001 .