A numerical study on seismic performance of strap-braced cold-formed steel shear walls

This paper presents a non-linear finite element analyses in order to optimize the seismic characteristics of strap-braced cold formed steel shear walls enhanced with brackets in the four interior corners of the wall. The numerical models presented here are verified based on experimental tests considering different structural characteristics including: material nonlinearity, geometrical imperfection, residual stresses and perforations. A comparison between the numerical simulations and the test results shows a good agreement proves that the finite element analysis can be used effectively to predict the ultimate capacity of strap-braced CFS shear panels. A total of 16 models with different variants of bracket length are investigated. Of particular interests were the specimens' maximum lateral load capacity and deformation behavior in addition to a rational estimation of the seismic response modification factor. Preliminary conclusions presented in this paper, refer to the optimum seismic characteristics of strap-braced CFS shear walls and the corresponding dimensions and configuration.

[1]  Reynaud Serrette,et al.  Shear Resistance of Gypsum-Sheathed Light-Gauge Steel Stud Walls , 1996 .

[2]  Colin A. Rogers,et al.  Preliminary R-values for Seismic Design of Steel Stud Shear Walls , 2002 .

[3]  Adrian M. Chandler,et al.  Earthquake ductility and overstrength in residential structures , 1999 .

[4]  Reza Akbari,et al.  SEISMIC BEHAVIOUR FACTOR, R, FOR STEEL X-BRACED AND KNEE-BRACED RC BUILDINGS , 2003 .

[5]  Hassan Moghimi,et al.  Performance of light-gauge cold-formed steel strap-braced stud walls subjected to cyclic loading , 2009 .

[6]  William T. Holmes,et al.  The 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures , 2000 .

[7]  V. Avanessian,et al.  Shear Wall Resistance of Lightgage Steel Stud Wall Systems , 1990 .

[8]  Hamid R. Ronagh,et al.  Performance of K-braced cold-formed steel shear walls subjected to lateral cyclic loading , 2010 .

[9]  H. Ronagh,et al.  An experimental investigation on the lateral behavior of knee-braced cold-formed steel shear walls , 2012 .

[10]  Hector A. Jensen,et al.  Design and sensitivity analysis of dynamical systems subjected to stochastic loading , 2005 .

[11]  Hassan Moghimi,et al.  Better connection details for strap-braced CFS stud walls in seismic regions , 2009 .

[12]  W. J. Hall,et al.  Earthquake spectra and design , 1982 .

[13]  Moon Sung Lee,et al.  Shaketable tests of a cold-formed steel shear panel , 2006 .

[14]  Hamid R. Ronagh,et al.  A numerical study on seismic characteristics of knee-braced cold formed steel shear walls , 2011 .

[15]  Benjamin W. Schafer,et al.  Computational modeling of cold-formed steel: characterizing geometric imperfections and residual stresses , 1998 .

[16]  Emad Gad,et al.  Lateral performance of cold-formed steel-framed domestic structures , 1999 .

[17]  R. Sharpe.  Tentative Provisions for the Development of Seismic Regulations for Buildings , 1994 .

[18]  Chia-Ming Uang,et al.  Establishing R (or Rw) and Cd Factors for Building Seismic Provisions , 1991 .

[19]  Robert Park,et al.  Evaluation of ductility of structures and structural assemblages from laboratory testing , 1989 .