Experimental Setup for the Validation of the Bio-Inspired Thruster of an Ostraciiform Swimming Robot

In the last two decades, bio-inspired solutions have been thoroughly investigated as a source of efficiency and manoeuvrability improvement for underwater robots. The possibility to design a machine capable of propelling itself like a marine animal strongly depends on the understanding of the mechanics principles underlying biological swimming. The adoption of advanced simulation and measurement techniques is then fundamental to investigate the fluid-structure interaction phenomena characterizing the locomotion of aquatic animals. To address this very ambitious objective, the Authors designed an experimental setup devised to investigate the propulsive performances of an ostraciiform swimming robot. The numerical simulations performed on an oscillating foil led to the design of a dedicated force sensor, able to allow a complete characterization of the bio-inspired thruster and its actuation mechanism. The experimental test campaign is still under development but the results of the preliminary tests are hereby provided.

[1]  Alan J. Murphy,et al.  Using Bio-Inspiration to Improve Capabilities of Underwater Vehicles , 2011 .

[2]  David Scaradozzi,et al.  Design of a bio-inspired underwater vehicle , 2016, 2016 12th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA).

[3]  Xinyan Deng,et al.  Microautonomous Robotic Ostraciiform (MARCO): Hydrodynamics, Design, and Fabrication , 2008, IEEE Transactions on Robotics.

[4]  P. Prempraneerach,et al.  The effect of chordwise flexibility on the thrust and efficiency of a flapping foil , 2003 .

[5]  Alessandro Colombo,et al.  Assessment of a high-order accurate Discontinuous Galerkin method for turbomachinery flows , 2016 .

[6]  Chunlin Zhou,et al.  Performance study of a fish robot propelled by a flexible caudal fin , 2010, 2010 IEEE International Conference on Robotics and Automation.

[7]  Xing Zhang,et al.  Self-propulsion of flapping bodies in viscous fluids: Recent advances and perspectives , 2016 .

[8]  P. Libby,et al.  Two-dimensional Problems in Hydrodynamics and Aerodynamics , 1965 .

[9]  David Scaradozzi,et al.  BCF swimming locomotion for autonomous underwater robots: a review and a novel solution to improve control and efficiency , 2017 .

[10]  Michael Sfakiotakis,et al.  Review of fish swimming modes for aquatic locomotion , 1999 .

[11]  Li Wen,et al.  Hydrodynamic Experimental Investigation on Efficient Swimming of Robotic Fish Using Self-propelled Method , 2010 .

[12]  Kyu-Jin Cho,et al.  Kinematic Condition for Maximizing the Thrust of a Robotic Fish Using a Compliant Caudal Fin , 2012, IEEE Transactions on Robotics.

[13]  David Scaradozzi,et al.  Computational fluid dynamics analysis and design of an ostraciiform swimming robot , 2017, 2017 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[14]  M. J. Wolfgang,et al.  Drag reduction in fish-like locomotion , 1999, Journal of Fluid Mechanics.

[15]  C. Eloy.  Optimal Strouhal number for swimming animals , 2011, 1102.0223.

[16]  M. Triantafyllou,et al.  Oscillating foils of high propulsive efficiency , 1998, Journal of Fluid Mechanics.

[17]  Young Jae Lee,et al.  Experiments and identification of an ostraciiform fish robot , 2007, 2007 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[18]  Weishan Chen,et al.  Research on the Swing of the Body of Two-Joint Robot Fish , 2008 .

[19]  James Tangorra,et al.  Fish biorobotics: kinematics and hydrodynamics of self-propulsion , 2007, Journal of Experimental Biology.