A Maneuver Based Design of a Passive-Assist Device for Augmenting Active Joints

This paper describes a novel, general methodology for designing a parallel, passiveassist device to augment an active system using optimization based on a known maneuver of the active system. Implementation of the passive-assist device can result in an improvement in system performance with respect to efficiency, reliability, and/or utility. The methodology is demonstrated with a torsional spring designed to minimize energy consumption of a prototypical unmanned ground vehicle robot arm. Initial results indicate that this procedure can reduce maximum required torque by 50% and energy consumed by as much as 25%. The proposed method is experimentally verified and compared to other state-of-the-art design approaches. [DOI: 10.1115/1.4024237]

[1]  A. Galip Ulsoy,et al.  Distributed Supervisory Controller Design for Battery Swapping Modularity in Plug-In Hybrid Electric Vehicles , 2012 .

[2]  Thomas A. McMahon,et al.  Muscles, Reflexes, and Locomotion , 1984 .

[3]  Roland Siegwart,et al.  High compliant series elastic actuation for the robotic leg scarleth , 2011 .

[4]  Panos Y. Papalambros,et al.  Combined Optimal Design and Control With Application to an , 2002 .

[5]  Bram Vanderborght,et al.  Comparison of Mechanical Design and Energy Consumption of Adaptable, Passive-compliant Actuators , 2009, Int. J. Robotics Res..

[6]  E. Schmitz,et al.  Control of a flexible robot arm , 1980 .

[7]  Alexander H. Slocum,et al.  Precision passive mechanical alignment of wafers , 2003 .

[8]  R. Riener,et al.  A Novel Mechatronic Body Weight Support System , 2006, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[9]  Conor James Walsh,et al.  An autonomous, underactuated exoskeleton for load-carrying augmentation , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[10]  Michel Benoit,et al.  MoonWalker, a lower limb exoskeleton able to sustain bodyweight using a passive force balancer , 2010, 2010 IEEE International Conference on Robotics and Automation.

[11]  J. L. Herder,et al.  Energy-free systems: theory, conception, and design of statically balanced spring mechanisms , 2001 .

[12]  A. Galip Ulsoy,et al.  Experimental Verification of a Passive-Assist Design Approach for Improved Reliability and Efficiency of Robot Arms , 2012 .

[13]  Leonid B. Freidovich,et al.  Parallel Elastic Actuators as a Control Tool for Preplanned Trajectories of Underactuated Mechanical Systems , 2010, Int. J. Robotics Res..

[14]  J. X. Qiu,et al.  The Counterbalance Design of the Articulated Robot Arms , 1990 .

[15]  A. Galip Ulsoy,et al.  Maneuver based design of a passive-assist device for augmenting linear motion drives , 2013, American Control Conference.

[16]  Anand M. Sharan,et al.  The optimal balancing of the robotic manipulators , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[17]  M. Pandy,et al.  Storage and utilization of elastic strain energy during jumping. , 1993, Journal of biomechanics.

[18]  Matthew M. Williamson,et al.  Series elastic actuators , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[19]  T.-J. Yeh,et al.  Modeling and robust control of worm-gear driven systems , 2005, IEEE International Conference on Mechatronics, 2005. ICM '05..

[20]  A. Galip Ulsoy,et al.  A passive-assist design approach for improved reliability and efficiency of robot arms , 2011, 2011 IEEE International Conference on Robotics and Automation.

[21]  Gen Endo,et al.  A passive weight compensation mechanism with a non-circular pulley and a spring , 2010, 2010 IEEE International Conference on Robotics and Automation.

[22]  Madhan Shridhar Phadke,et al.  Quality Engineering Using Robust Design , 1989 .

[23]  G. K. Ananthasuresh,et al.  Perfect Static Balance of Linkages by Addition of Springs But Not Auxiliary Bodies , 2012 .

[24]  Kazuo Ishii,et al.  Concept of Intelligent Mechanical Design for autonomous mobile robots , 2007 .

[25]  A. Galip Ulsoy,et al.  Control of a Flexible Robot Arm: Experimental and Theoretical , 1987 .

[26]  Qi Lu,et al.  A Simulation Study of a Reduced-Gravity Simulator for Simulating Human Jumping and Walking in a Reduced-Gravity Environment , 2009 .

[27]  Po-Yang Lin.  Design of Statically Balanced Spatial Mechanisms With Spring Suspensions , 2012 .

[28]  Matthew D. Berkemeier,et al.  Decreasing the energy costs of swimming robots through passive elastic elements , 1997, Proceedings of International Conference on Robotics and Automation.

[29]  A. Galip Ulsoy,et al.  Dynamic Simulation of a Leadscrew Driven Flexible Robot Arm and Controller , 1986 .

[30]  Giuseppe Radaelli,et al.  An Energy Approach to Static Balancing of Systems With Torsion Stiffness , 2011 .

[31]  James P. Schmiedeler,et al.  Design and control of a planar bipedal robot ERNIE with parallel knee compliance , 2008, Auton. Robots.