Study of molybdenum oxide optimized hole carrier transport in perovskite solar cells

[1]  Liyan Yu,et al.  Improved charge extraction and atmospheric stability of all-inorganic Cs2AgBiBr6 perovskite solar cells by MoS2 nanoflakes , 2022, Solar Energy Materials and Solar Cells.

[2]  Peijie Wang,et al.  Study of black phosphorus quantum dot modified SnO2-based perovskite solar cells , 2022, Applied Physics Letters.

[3]  Kwang Soo Kim,et al.  Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes , 2021, Nature.

[4]  Ying Ying Wang,et al.  Molybdenum Oxide/Tungsten Oxide Nano-heterojunction with Improved Surface-Enhanced Raman Scattering Performance. , 2021, ACS applied materials & interfaces.

[5]  T. Matsushima,et al.  Unintentional passivation of 4-tertbutyl pyridine for improved efficiency and decreased operational stability of perovskite solar cells , 2021, Applied Physics Letters.

[6]  S. Albrecht,et al.  Enhanced Self-Assembled Monolayer Surface Coverage by ALD NiO in p-i-n Perovskite Solar Cells , 2021, ACS applied materials & interfaces.

[7]  Jun Hee Lee,et al.  Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells , 2021, Nature.

[8]  Hongwei Zhu,et al.  Low-Cost Dopant Additive-Free Hole-Transporting Material for a Robust Perovskite Solar Cell with Efficiency Exceeding 21% , 2020, ACS Energy Letters.

[9]  Chao Yao,et al.  A hole-transport material that also passivates perovskite surface defects for solar cells with improved efficiency and stability , 2020, Energy & Environmental Science.

[10]  Dong Suk Kim,et al.  Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss , 2020, Science.

[11]  Fei Wu,et al.  Dopant‐Free Organic Hole‐Transporting Material for Efficient and Stable Inverted All‐Inorganic and Hybrid Perovskite Solar Cells , 2020, Advanced materials.

[12]  Hyesung Park,et al.  Solution‐Processed Molybdenum Oxide with Hydroxyl Radical‐Induced Oxygen Vacancy as an Efficient and Stable Interfacial Layer for Organic Solar Cells , 2020 .

[13]  H. Tian,et al.  Efficient and Stable Chemical Passivation on Perovskite Surface via Bidentate Anchoring , 2019, Advanced Energy Materials.

[14]  Tae-Youl Yang,et al.  A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells , 2018, Nature Energy.

[15]  T. Noda,et al.  Thermally Stable MAPbI3 Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 cm2 achieved by Additive Engineering , 2017, Advanced materials.

[16]  Qi Chen,et al.  Chemical Reduction of Intrinsic Defects in Thicker Heterojunction Planar Perovskite Solar Cells , 2017, Advanced materials.

[17]  Tejas S. Sherkar,et al.  Recombination in Perovskite Solar Cells: Significance of Grain Boundaries, Interface Traps, and Defect Ions , 2017, ACS energy letters.

[18]  A. Jen,et al.  SrCl2 Derived Perovskite Facilitating a High Efficiency of 16% in Hole‐Conductor‐Free Fully Printable Mesoscopic Perovskite Solar Cells , 2017, Advanced materials.

[19]  H. Misawa,et al.  Cobalt Oxide (CoOx) as an Efficient Hole-Extracting Layer for High-Performance Inverted Planar Perovskite Solar Cells. , 2016, ACS applied materials & interfaces.

[20]  Z. Yin,et al.  Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells , 2016, Nature Energy.

[21]  Anders Hagfeldt,et al.  Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance , 2016, Science.

[22]  Wei Chen,et al.  Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering , 2016, Nature Energy.

[23]  C. Brabec,et al.  Overcoming the Interface Losses in Planar Heterojunction Perovskite‐Based Solar Cells , 2016, Advanced materials.

[24]  Chien-Hung Chiang,et al.  Bulk heterojunction perovskite–PCBM solar cells with high fill factor , 2016, Nature Photonics.

[25]  Lei Meng,et al.  Recent Advances in the Inverted Planar Structure of Perovskite Solar Cells. , 2016, Accounts of chemical research.

[26]  Vijay P. Singh,et al.  Nanowire CdS-CdTe Solar Cells with Molybdenum Oxide as Contact , 2015, Scientific Reports.

[27]  Xing Zhang,et al.  Metal-free efficient photocatalyst for stable visible water splitting via a two-electron pathway , 2015, Science.

[28]  Thomas Riedl,et al.  Solution processed metal-oxides for organic electronic devices , 2013 .

[29]  S. Y. Chiam,et al.  Enhanced Extraction Rates through Gap States of Molybdenum Oxide Anode Buffer , 2013 .

[30]  Wolfgang Kowalsky,et al.  Role of the deep-lying electronic states of MoO3 in the enhancement of hole-injection in organic thin films , 2009 .

[31]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[32]  Namchul Cho,et al.  High‐Performance and Environmentally Stable Planar Heterojunction Perovskite Solar Cells Based on a Solution‐Processed Copper‐Doped Nickel Oxide Hole‐Transporting Layer , 2015, Advanced materials.

[33]  Nripan Mathews,et al.  The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells , 2014 .