论文信息 - Millimeter-wave system for high data rate indoor communications

Millimeter-wave system for high data rate indoor communications

This paper presents the realization of a wireless Gigabit Ethernet communication system operating in the 60 GHz band. The system architecture uses a single carrier modulation. A differential encoded binary phase shift keying modulation and a differential demodulation scheme are adopted for the intermediate frequency blocks. The baseband blocks use Reed-Solomon RS (255, 239) coding and decoding for channel forward error correction (FEC). First results of bit error rate (BER) measurements at 875 Mbps, without channel coding, are presented for different antennas.

Ghaïs El Zein | Gheorghe Zaharia | Yvan Kokar | Lahatra Rakotondrainibe

[1] Peter F. M. Smulders,et al. On the Design of Low-Cost 60-GHz Radios for Multigigabit-per-Second Transmission over Short Distances [Topics in Radio Communications] , 2007, IEEE Communications Magazine.

[2] Chia-Chin Chong,et al. An Overview of Multigigabit Wireless through Millimeter Wave Technology: Potentials and Technical Challenges , 2007, EURASIP J. Wirel. Commun. Netw..

[3] Ghaïs El Zein,et al. Indoor Channel Measurements and Communications System Design at 60 GHz , 2008, ArXiv.

[4] Hiroshi Harada,et al. A design of single carrier based PHY for IEEE 802.15.3c standard , 2007, 2007 IEEE 18th International Symposium on Personal, Indoor and Mobile Radio Communications.